Hoover CLEANSLATE FH14052V User manual

QUICK START GUIDE
Apply downward pressure on
the front of the cleaning tool
and pull towards you to lift
the stain. Repeat as needed.
Spray a generous amount of
cleaning formula over stain
by pressing the trigger
behind the tool.
Place the SpinScrub tool on
the stain and allow the tool to
rotate on the spot.
SUCTIONSPIN
SPRAY
HOW TO USE
3
21
Add cleaning formula to
Solution Tank using the ratio
chart in manual and included
measuring cup.
Slide tank back into the unit.
Unwrap hose from unit and
attach preferred tool.
Remove Solution Tank from
the unit.
GETTING STARTED
CARPET & UPHOLSTERY
SPOT CLEANER WITH
POWERED SCRUBBING KIT
CLEANSLATE™

FOR BEST PERFORMANCE: Empty the tank, flush the hose, and rinse the tools after each use.
WHEN FULL, THERE WILL BE A CHANGE IN OPERATING SOUND: Empty recovery tank promptly.
PRO TIPS
FOR BEST EXPERIENCE: Use formula ratio chart in manual when filling solution tank. Add water
before formula.
Tackle tougher stains with less
effort.
SpinScrub Tool Hose Rinse Tool
Flush the hose with water to
remove any left behind dirt &
debris after use.
Tight Spot Tool
Clean crevices, corners,
baseboards and other tough to
reach areas.
TOOLS FOR EVERY MESS
961003553 R0