Hoover Expert User manual

expert
Advanced Intelligence
Robotic Vacuum Cleaner
3D Object Detector Technology
Cliff/Stair Avoidance Sensor
Anti-Bacterial UV Cleaning
Light and HEPA Filtration
expert

2.
3
2
5
4
1
6 7 8 9 10
11 12 13 14

Features
3.
Features:
1. Power Switch / Battery Charger Socket
(not shown)
2. Operating Buttons (not shown)
3. Signal Transmitter
4. Auto-Charging Electrodes
5. Wall Detection Sensors
Specifications:
Voltage: 14.4V
Filtration: HEPA
Charge Time: 3.5Hrs
Run Time: 120mins Hard Floor,
90mins Carpet
Dust Capacity: 350mL
Noise Level: <60dBa
Weight: 3.1Kg
Accessories:
6. Remote Controller
7. Charging Base Plate
8. Mains Power Adaptor
9. Virtual Wall x2
10. Trailing Bar with Polishing Pad
11. Polishing Pad (one attached
on the trailing bar)
12. Cleaning Brush
13. Side Brush (one is installed)
14. Rechargeable Battery
15. Microfibre Cloth (not shown)
16. HEPA Filter (installed)
Batteries not included in virtual wall
and remote control. Remote Control –
2 x AAA Battery required.
Virtual Wall – 2 x AA Battery required.
Please contact Hoover Customer Care 1300 360 845,
NZ [phone] to find your local spare parts provider.
9240 Expert
Congratulations on the purchase of your new HOOVER vacuum cleaner. There are many useful
features built into your extractor and we recommend that you carefully read this instruction manual
so that you may take best advantage of them.

4.
Ground detection sensors
Ground detection sensors
Right wheel
Floor brush
Anti-bacterial
UV light
Dust container
Main cleaning brush
Power switch
Battery charger
socket
Left wheel
Side brush
Front wheel
Battery cover
Top cover
AUTO/automatic cleaning
SPOT/spot cleaning
CHARGE/charge
Signal transmitter
Auto-charging electrodes
Wall detection sensors
Decorative lights
Decorative lights
Robot Vacuum:

Before you Begin
5.
Before you Begin
This cleaner must be operated in accordance with these instructions and used only for domestic
household cleaning to remove DRY dirt and dust from household carpet and flooring. This cleaner is not
fit to be used as an industrial cleaner hence will void the manufacturer’s warranty if used inappropriately.
Please read these instructions thoroughly
This will ensure you obtain full benefit from your new cleaner. Keep this Instruction Manual in a handy
place for future reference.
Important
Always switch the cleaner off and remove the charger from the electricity supply before cleaning
your appliance, when not in use, or attempting any maintenance task. The cleaner must only be
connected to an AC supply at the voltage shown on the rating plate. This cleaner should only be
used for its intended purpose as described in these instructions.
Precautionary measures:
1. Do not operate the vacuum cleaner too close to heaters, radiators, and
other hot surfaces.
2. Before inserting the plug into the wall, make sure your hand is dry.
3. Before turning on the vacuum cleaner, remove any large or sharp objects
from the floor or cleaning surface in order to prevent damage to the cleaner.
4. When you want to pull the plug from the wall, do not use the power
cable, gently pull the plug from the power socket.