Hoover STREAMLINE FH46000V User manual

QUICK START GUIDE
EASY ASSEMBLY
FILLING THE TANK
STREAMLINE™
HARD FLOOR CLEANER
1
Insert handle into main unit. You will hear a click when inserted properly.
1
Remove solution tank
from your product by
pressing RELEASE latch.
2
First, open the flap and fill with water to the
WATER line.
Next, fill Hoover Solution to SOLUTION fill line.
3
Close the flap and
reinsert tank until it
clicks into place.

90
SECONDS
HOW TO USE
HOW TO USE SELF-CLEAN
2
Move the device slowly back and
forth across the hard floor.
Water is dispensed using the
click of the trigger.
3
For stubborn messes switch to
BOOST mode using the + button
on the handle.
1
Locate and push the power
button on the handle to start
your machine.
1
Make sure the Clean Water tank
is at least half full.
2
Place your Streamline on the
tray and press the Self-Clean
button.
3
The unit will start a 90 second
self-clean cycle.
Do not remove from tray until
cycle is complete.
961003600-R0
FOR BEST PERFORMANCE, CHOOSE HOOVER®
BUY SOLUTIONS TODAY