Kit Contents
1 x Solar panel
1 x Number/Letter
2 x Screws
2 x Masonry plugs
Assembly
Slot and click into place the letter or number into the
solar light panel by lining up the grooves. To ensure this
is done correctly, the number or letter should be facing
out, so it is able to be read.
Lighting Modes
Once activated, the light automatically turns on at dusk
and switches off at dawn.To activate the light, press the
button on the base of the solar panel. Test by covering the
solar panel completely to check that the light comes on.
The light is now ready for use. This light includes 3
different colour options as well as the ability to adjust
the brightness.
Colour Options:
1Warm white
2Cool white
3Blue
Brightness:
1Low
2High
To adjust the colour or brightness simply toggle the
relevant switch located on the bottom of the light.
Product Installation
STEP 1 Find a suitable location
Solar lights need access to direct sunlight for optimum
results; preferably 6-8 hours per day.
STEP 2 Install the light
Installation - Option 1
Using adhesive outdoor tape.
Adhere using Hoselink Outdoor Acrylic Double-Sided
Tape (SKU L100), sold separately. Be sure to stick the tape
onto the back of the light.
Installation - Option 2
Using supplied hardware.
Remove the screw plate from the rear of the solar panel
to use as a template.
Masonry installation.
Using an electric drill (hammer or rotary), make a hole
with a 6mm masonry drill piece. Hammer the plug into
place then secure the screw.
Timber installation.
Using an electric drill, make a hole with a 3mm drill piece
then secure the screw (without the plug).
Be sure to clean the solar panel periodically to maintain
optimal performance.
Specifications
Solar panel 4.86V/0.52W
LED Lumens 20 lumens ( bright light )
Lithium Battery 2000mAh / 3.7V
Charge Time 16.3 hours
Working Time 48 hours
Number of Lights 12 LEDs ( 4 x warm, 4 x cool, 4 x blue )
Solar Panel Size 50mm x 85mm
Water Proof Rating IP54
Light Size 94*52.5*180mm
Materials ABS+UV
