Q:Can I use Training Collar with more than one pet?
A:Yes,you can simply add one more receiver collar to the system.
Q:Will I get exactly 800 yards of range with the Remote Trainer?
A:The effective range of the Remote Trainer means the straight-
line distance between Remote Trasmitter and Receiver Collar
without obstacles in between.Range may be variable according
to terrain,weather,vegetation,battery capability as well as the
transmission from other radio devices.
Q:How long can I continuously deliver vibration or static shock to
my pet?
A:The maximum amount of time you can press the vibration or
static shock to your pet continously is 10 seconds.After this,the
vibration or static shock will stop, and the button must be
released and pressed again.
Q:What do I do if my pet's neck becomes red and irritated?
A:Discontinue to use the product for a few days.If the condition
persists beyond 48 hours,consult your veterinarian for help.
Once the skin recovers, check the skin condition of your pet
frequently.
Q:How long is the lifetime of the lithium battery ?
A:Our Lithium battery can charge 2000 times for Remote
Controller and Receiver Collar.
Q:How long can I remove the Receiver Collar from my dog?
A:The Collar is not designed to be worn constanly.We recommend
the Collar not be worn for more than 12 hour of every 24-hour
period.
Q:How long should I process my training session for my pet?
A:Training sessions should be kept positive and short ,it is better
for about 10-15 minutes each time.
Q:What kind of dogs are your training collar suitable for?
A:The collar is adjustable from length 5.9"(15cm)to 19.6"(50cm),if
your pet's neck is smaller than 5.9",you have to rethread it,if
your pet's neck is larger than 22",please don't buy it and this
collar is not suitable for the dogs less than 8 pounds either.
Frequently Asked Questions
Q:How old does my pet have to be before using Traning Collar?
A:Your pet should be able to recoginze basic obedience commands
such as “Sit”or “Stay”This product may be too large for
pets under 8 pounds.
Q: Why the remote control and the receiver can not be charged?
A:Please use the charger configured for the product. It is
prohibited to use mobile phone chargers to charge the product.
89
HOW TO USE
Note: Please charge before using the product!
1.Charge the remote transmitter:
1) Connect the charger cable to the charging port.
2) Plug the charger into a standard outlet.
3)The icon of battery will flash.
4) Charge the transmitter for about one hour for the first charge or
until the icon of battery stops flashing.
2.Charge the collar receiver:
1) Connect the charger cable to the DC-5V port.
2) Plug the charger into a standard wall outlet.
3) The red light will flash on the receiver
(If not or green light ,please plug the charger again).
4) Charge the receiver for about one hour for the first charge or
until the light indicates charging is completed.
3.Connect transmitter and receiver
1) Turn on the transmitter.
2) Press "1/2"button to choose channel 1 for pairing.
3)Turn on the receiver
4)Press the "Power"button on the receiver again.
5) After a beep from the receiver, press the "Vibration button"
within 30 seconds for pairing.
6) The collar receiver will beep if connected successfully.
7)If the pairing were not successful, please repeat the 3-5 steps.
8) To encode the second receiver, press the "1/2"button and
select for the second receiver and follow the same procedure.
