Dogtra element 300M Series User manual

MAIN FEATURES
PRODUCT SAFETY AND HEALTH
STATEMENTS
PACKAGE CONTENTS
DESCRIPTION OF TRANSMITTER PARTS
BUTTON FUNCTIONS
DESCRIPTION OF RECEIVER / COLLAR
PARTS
BATTERY CHARGER
TESTING YOUR
COLLAR
FITTING THE COLLAR ON THE DOG
CHARGING THE BATTERIES
RECEPTION
ACCESSORIES
BASIC MAINTENANCE
TROUBLESHOOTING GUIDE
WARRANTY AND REPAIR INFORMATION
EC DECARATION OF CONFORMITY
2
3
4
5
11
15
19
20
22
24
26
27
28
29
32
35
1
CONTENTS

2
Easy-to-use, ergonomic transmitter.
Rheostat dial that allows for gradual increases in
stimulation intensity with no jumps between
levels.
The has a 1/2-mile
range.
Two-dog model allows the trainer to control two
different dogs from one transmitter.
Waterproof receiver/collar and handheld
transmitter.
Reduced receiver/collar is ideal for small/medium
size dogs.
No external antenna on the receiver/collar.
Rechargeable, user-replaceable Ni-MH batteries.
One-charger system allows the transmitter and
receiver(s) to be charged at the same time.
Over 8000 different identity codes to prevent
conflicts with other e-collars.
MAIN FEATURES
MAIN FEATURES

3
PRODUCT SAFETY AND HEALTH STATEMENTS
Proper e-collar use
Dogtra e-collars are intended for the sole purpose of
behavior modification of dogs. They are not intended
for human use or use on other animals. Dogtra
Company does not assume any liability for improper
use of the dogtra e-collar.
Aggressive dogs
Dogtra does not recommend using the e-collar to
correct dogs that are aggressive towards other dogs or
people. In many such cases the dog will associate the
stimulation with the other dog or individual and
become even more aggressive. Dog aggression is best
treated by a dog-training specialist.
Interference with other electronic devices
Dogtra’s industry-leading technology filtering system
ensures minimal interference with other electronic
devices (garage door openers, pacemakers, etc.).
Our digital microprocessor offers thousands of unique
codes to eliminate frequency match-up with other
dogtra e-collars.
Inadvertent activation
If the constant button is held down for 12 seconds or
more the unit will automatically shut down. It
reactivates when the button is released.
PRODUCT SAFETY AND HEALTH STATEMENTS

Transmitter
Receiver (two receiver/collars for
dogtra two-dog models)
Battery charger and splitter cable
Owner’s manual
PACKAGE CONTENTS
4
PACKAGE CONTENTS

6
DESCRIPTION OF TRANSMITTER PARTS
DESCRIPTION OF
TRANSMITTER PARTS
transmitter (2-dog unit)
Antenna
Nick/Constant
Toggle Switch
Battery Charging
Receptacle &
Rubber Plug
1st-dog
Pager
(Gray Button)
2nd-dog
Pager
(Orange Button)
Rheostat
Intensity Dial
Indicator Light
(LED Window)
1st-dog
Nick &Constant
(Gray Button)
2nd-dog
Nick &Constant
(Orange Button)
On/Off Magnetic
Red Dot

5
DESCRIPTION OF TRANSMITTER PARTS
DESCRIPTION OF
TRANSMITTER PARTS
transmitter (1-dog unit)
Antenna
Battery Charging
Receptacle &
Rubber Plug
On/Off Magnetic
Red Dot
Pager
Button
Rheostat
Intensity Dial
Indicator Light
(LED Window)
“Nick” Button
“Constant” Button

7
DESCRIPTION OF TRANSMITTER PARTS
Transmitter Antenna
A short 2 antenna is supplied with the
transmitter.
The antenna must be fastened to the transmitter
before using the unit.

8
DESCRIPTION OF TRANSMITTER PARTS
Rheostat Intensity Dial
The Rheostat Intensity Dial is located on the top of the
transmitter: (0) being the lowest level and (100) being
the highest level.
You will need to adjust the setting (upward or
downward) depending on your dog’s temperament and
threshold for stimulation. Also, as the dog’s attitude
changes, especially during times of increased
excitement or distraction, you may need to adjust the
intensity level.
NOTE : In the constant mode, the stimulation
intensity can be increased or decreased while
the button is depressed.

9
DESCRIPTION OF TRANSMITTER PARTS
Transmitter Indicator Light (LED Window)
The transmitter indicator light (LED) is located near
the Rheostat Intensity Dial. The LED light will come
on when a button is pressed.
The color of the light indicates the status of battery
life. Green Indicates the battery is fully charged. It
turns to amber when the battery is at medium charge.
It is acceptable to charge your unit even at medium
charge without any damage incurred to your unit.
When the transmitter indicator emits a blinking red
light, the battery needs to be recharged.
(Green = full charge, Amber = medium charge,
Red = needs charge)