HP ENVY Recline 27-k050xt TouchSmart Instruction Manual

Start Here

© Copyright 2013 Hewlett-Packard
Development Company, L.P.
Windows is a U.S. registered trademark of
Microsoft Corporation.
The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
First Edition: August 2013
Document Part Number: 740688-001
Product notice
This guide describes features that are
common to most models. Some features
may not be available on your computer.
Not all features are available in all editions
of Windows 8. This computer may require
upgraded and/or separately purchased
hardware, drivers and/or software to take
full advantage of Windows 8 functionality.
See http://www.microsoft.com for details.
Software terms
By installing, copying, downloading, or
otherwise using any software product
preinstalled on this computer, you agree to
be bound by the terms of the HP End User
License Agreement (EULA). If you do not
accept these license terms, your sole
remedy is to return the entire unused
product (hardware and software) within 14
days for a full refund subject to the refund
policy of your seller.
For any further information or to request a
full refund of the price of the computer,
please contact your seller.

Table of contents
1 See what's new ................................................................................................................................................. 1
2 Navigating the Start screen ............................................................................................................................... 2
Locating the Start button and the Start menu ....................................................................................... 3
Shutting down the computer ................................................................................................................. 3
Displaying all apps ............................................................................................................................... 3
Closing apps ......................................................................................................................................... 4
Enhanced search feature ..................................................................................................................... 4
Enhanced snap feature ........................................................................................................................ 4
Discovering and connecting to a Miracast-certified wireless display (select models only) ................... 4
Opening to the Windows desktop instead of the Start screen .............................................................. 5
This PC ................................................................................................................................................. 5
3 Backup, restore, and recovery updates ............................................................................................................ 6
Using Windows backup and restore ..................................................................................................... 6
Checking for recovery partitions ........................................................................................................... 6
Using HP Software Setup (select models only) .................................................................................... 6
Using other backup, restore, and recovery tools .................................................................................. 6
4 Specifications update ........................................................................................................................................ 7
Input power ........................................................................................................................................... 7
5 More HP resources ........................................................................................................................................... 8
iii

iv

1 See what's new
This guide describes new Windows® features, which may update some of the information provided
with your computer. These new features include the following:
●Start button and Start menu
●Easier shutdown process
●Enhanced search options
●Enhanced snap multi-tasking capability
●Optional setting to go to the desktop upon sign-in
●Backup and recovery information
●Additional operating specifications
1

2 Navigating the Start screen
The Start screen provides a central location where you can access information and email, browse the
Web, stream videos, view photos, and access social media websites.
NOTE: Your computer's Start screen may look different than the following illustration.
Action Using a keyboard and mouse Using touch gestures
(1) Open an app Click a Start screen app. Tap a Start screen app.
(2) Display the charms (Search,
Share, Start, Devices, and
Settings)
Point to the upper-right or lower-right
corner of the Start screen.
Swipe from the right edge of the
TouchPad or touch screen.
(3) Find a list of all apps on your
computer
Point to the lower-left area of the Start
screen, and then click the arrow.
To return to the Start screen, click the
arrow again.
Swipe to the left on the TouchPad or the
touch screen until the arrow appears, and
then tap the arrow in the lower-left corner
of the Start screen.
To return to the Start screen, tap the
arrow again.
NOTE: On select touch screen models,
swipe up to display a list of all apps on
your computer, and swipe down to return
to the Start screen.
(4) Display the Start menu Point to the lower-left area of the Start
screen, and then right-click the Start
button.
Tap the Desktop app, and then press and
release the Start button in the lower-left
corner.
(5) Switch between open apps Point to the upper-left corner of the Start
screen to reveal a list of open apps, and
then click an open app.
Swipe in and out from the left edge of the
TouchPad or touch screen to reveal a list
of open apps, and then tap an open app.
2 Chapter 2 Navigating the Start screen

IMPORTANT: To quickly return to the Start screen, press the Windows key on your keyboard,
or point to the lower-left corner of the Start screen, and then click or tap the Start button .
Locating the Start button and the Start menu
The Start button is displayed in the lower-left corner of the Windows desktop. The Start menu offers
quick access to frequently used options, including File Explorer, Control Panel, Desktop, Power
Options, and Shut down. For more information, see the
Windows Basics guide included with your
computer.
Follow the instructions below to display the Start button and the Start menu.
Action Using a keyboard and mouse Using touch gestures
Locate the Start button and the Start
menu
Point to the lower-left area of the Start
screen, and then right-click the Start
button to display the Start menu.
Tap the Desktop app, and then press
and release the Start button in the lower-
left corner to display the Start menu.
Shutting down the computer
To shut down the computer from the Start menu, follow the instructions below.
Action Using a keyboard and mouse Using touch gestures
Shut down the computer 1. Point to the lower-left area of the
Start screen, and then right-click the
Start button to display the Start
menu.
2. Select Shut down, and then select
Shut down.
– or –
1. Point to the upper-right or lower-right
corner of the screen to display the
charms, and then click Settings.
2. Click the Power icon, and then click
Shut down.
1. Tap the Desktop app, and then
press and release the Start button
in the lower-left corner to display
the Start menu.
2. Tap Shut down, and then tap Shut
down.
– or –
1. Swipe from the right edge of the
TouchPad or touch screen to
display the charms, and then tap
Settings.
2. Tap the Power icon, and then tap
Shut down.
Displaying all apps
Action Using a keyboard and mouse Using touch gestures
See all the apps on your computer Point to the lower-left area of the Start
screen, and then click the arrow.
To return to the Start screen, click the
arrow again.
Swipe to the left on the TouchPad or
touch screen until the arrow appears,
and then tap the arrow in the lower-left
corner of the Start screen.
To return to the Start screen, tap the
arrow again.
Locating the Start button and the Start menu 3

Action Using a keyboard and mouse Using touch gestures
NOTE: On select touch screen models,
swipe up to display a list of all apps on
your computer, and swipe down to return
to the Start screen.
Closing apps
Action Using a keyboard and mouse Using touch gestures
Close an app 1. Point to the upper-left corner of the
screen, and then move down the left
side of the screen to display all open
apps.
2. Drag an app to the right, and then
down to the bottom of the screen,
hold it until the app rotates, and then
release the app to close it.
1. From the upper-left corner of the
screen, swipe in and out to display
all open apps.
2. Drag an app to the right, and then
down to the bottom of the screen,
hold it until the app rotates, and
then release the app to close it.
Enhanced search feature
1. To search from the Start screen, begin typing a keyword.
Search results are displayed in a panel at the right side of the screen.
2. To expand your search, click or tap to select one of the following options:
●Everywhere
●Settings
●Files
●Web images
●Web videos
NOTE: If you cannot find the topic easily, type help, and then search within Help and Support.
Enhanced snap feature
You can snap applications to the left or right side of the screen in order to view a Start screen app
and a desktop app at the same time. Depending on the computer's screen resolution, you can snap
up to four apps at the same time.
▲Drag an app to the left or the right side of the screen.
Discovering and connecting to a Miracast-certified wireless
display (select models only)
Your computer is compatible with a Miracast-certified wireless display. To discover and connect
without leaving your current apps, follow the steps below.
4 Chapter 2 Navigating the Start screen

Action Using a keyboard and mouse Using touch gestures
Discover and connect to a Miracast-
certified wireless display
Point to the upper-right or lower-right
corner of the Start screen to display the
charms, click Devices, click Project, and
then follow the on-screen instructions.
Swipe from the right edge of the Start
screen to display the charms, tap
Devices, tap Project, and then follow the
on-screen instructions.
Opening to the Windows desktop instead of the Start screen
To change the default setting so that Windows will always open to the Windows desktop instead of
the Start screen, follow the steps below.
Action Using a keyboard and mouse Using touch gestures
Open to the Windows desktop
instead of the Start screen
1. From the Start screen, click the
Desktop app.
2. Right-click the navigation bar at the
bottom of the screen, and then select
Properties.
3. Click the Navigation tab, and then
select the check box labeled When I
sign in or close all apps on a screen,
go to the desktop instead of Start.
4. Click OK.
1. From the Start screen, tap the
Desktop app.
2. Tap and hold the navigation bar at
the bottom of the screen, and then
select Properties.
3. Tap the Navigation tab, and then
select the check box labeled
When I sign in or close all apps on
a screen, go to the desktop
instead of Start.
4. Tap OK.
To revert to the original sign-in setting, follow the instructions above, but clear the check box labeled
When I sign in or close all apps on a screen, go to the desktop instead of Start, and then click or tap
OK.
This PC
To explore files and folders on your computer and connected devices, from the Start screen, type
this pc, and then select This PC. This feature was formerly called My Computer.
Opening to the Windows desktop instead of the Start screen 5

3 Backup, restore, and recovery updates
The following backup, restore, and recovery procedures replace the procedures provided in the User
Guide
for your computer.
Using Windows backup and restore
For information about the Windows backup and restore features, see the HP Support Assistant.
NOTE: The path to access the HP Support Assistant has changed.
1. From the Start screen, select the HP Support Assistant app.
2. Type restore in the Search field, and then follow the information provided.
For additional backup information, type backup in the Search field.
Checking for recovery partitions
NOTE: If you need to check for the presence of the HP Recovery partition or Windows partition
before performing system recovery tasks, the steps have changed.
To check for the presence of the HP Recovery partition or Windows partition, from the Start screen,
type file and then select File Explorer.
Using HP Software Setup (select models only)
NOTE: If you need to use HP Software Setup to reinstall drivers or software that has been corrupted
or deleted from the system, the steps for accessing HP Software Setup have changed.
To access HP Software Setup:
1. From the Start screen, type HP Software Setup.
NOTE: If the HP Software Setup app does not appear, your system does not support this
feature. Refer to the
User Guide for restore and recovery steps for your computer.
2. Select HP Software Setup.
3. Follow the on-screen instructions to reinstall drivers or select software.
Using other backup, restore, and recovery tools
For additional information on backup, restore, and recovery, refer to the User Guide provided for your
computer.
6 Chapter 3 Backup, restore, and recovery updates

4 Specifications update
Input power
The power information in this section shows an operating voltage and current that may apply to your
device and may be helpful if you plan to travel internationally. For other input power ratings, see the
User Guide provided for your computer.
Input power Rating
Operating voltage and current 19.5 V dc @ 2.31 A – 45 W
Input power 7

5 More HP resources
To locate product details, how-to information, and more, use this table.
Resource Contents
Windows Basics guide ●Explanation of using Windows® 8
Getting Started with Windows 8 app on the Start screen. To
access this app, click or tap the Getting Started with
Windows 8 app.
●Video demonstrating Windows 8 features
HP worldwide support
To get support in your language, go to
http://welcome.hp.com/country/us/en/wwcontact_us.html.
●Online chat with an HP technician
●Email support
●Support telephone numbers
●HP service center locations
Regulatory, Safety and Environmental Notices
To access this information:
1. On the Start screen, type support, and then select the
HP Support Assistant app.
2. Select My computer, and then select User guides.
●Important regulatory notices, including proper battery
disposal information
Limited Warranty
To access this information:
1. On the Start screen, type support, and then select the
HP Support Assistant app.
2. Select My computer, and then select Warranty and
services.
– or –
Go to http://www.hp.com/go/orderdocuments.
●Specific warranty information about this computer
8 Chapter 5 More HP resources