HP Kayak XA-s 02xx User manual

HP Kayak
PC Workstation
Service Handbook
PC Workstations and
Accessories
4th Edition
June 2000
Ka_sh_1.bk Page 1 Thursday, June 15, 2000 7:27 PM

Medium-Profile
Desktop
PC Workstations
HP Kayak XA-s DT Series 02xx PC
Workstation 7-1
7
7
HP Kayak XA-s DT Series 02xx
PC Workstation
Models and Accessories
Product
Number
Cache
Memory
Std.
RAM
Hard
Drive
Video Controller Multi-media LAN
HP Kayak XA-s 6/xxx PC Workstation
HP Kayak XA-s PC Workstation 6/266 (Series 0202) (CPL: 07/98 )
D5751N Pentium
II with
512 KB
of L2
cache
memory
32 MB
SDRAM
100 MHz
non-ECC
4.3 GB
Ultra
ATA
Matrox
Productiva G100
8 MB video
memory fitted.
Not Upgradable.
32✕ Max IDE
CD-ROM.
Audio chip
(AD1816) is
integrated on
the system
board.
None
HP Kayak XA-s PC Workstation 6/300 (Series 0202) (CPL: 07/98 )
D5752N Pentium
II with
512 KB
of L2
cache
memory
32 MB
SDRAM
100 MHz
non-ECC
4.3 GB
Ultra
ATA
Matrox
Productiva G100
8 MB video
memory fitted.
Not Upgradable.
32✕Max IDE
CD-ROM.
Audio chip
(AD1816) is
integrated on
the system
board.
None
HP Kayak XA-s PC Workstation 6/333 (Series 0202) (CPL: 07/98 )
D5753N Pentium
II with
512 KB
of L2
cache
memory
32 MB
SDRAM
100 MHz
non-ECC
4.3 GB
Ultra
ATA
Matrox
Productiva G100
8 MB video
memory fitted.
Not Upgradable.
32✕Max IDE
CD-ROM.
Audio chip
(AD1816) is
integrated on
the system
board.
None
Ka_sh_1.bk Page 1 Thursday, June 15, 2000 7:27 PM

HP Kayak XA-s DT Series 02xx PC Workstation
7-2 HP Kayak XA-s DT Series 02xx PC
Workstation
Medium-Profile
Desktop
PC Workstations
7
HP Kayak XA-s PC Workstation 6/350 (Series 0202) (CPL: 07/98 )
D5755N Pentium
II with
512 KB
of L2
cache
memory
32 MB
SDRAM
100 MHz
non-ECC
6.5 GB
Ultra
ATA
Matrox
Productiva G100
8 MB video
memory fitted.
Not Upgradable.
32✕Max IDE
CD-ROM.
Audio chip
(AD1816) is
integrated on
the system
board.
None
D5757N 64 MB
SDRAM
100 MHz
non-ECC
4.5 GB
SCSI
10BT/
100TX
HP Kayak XA-s PC Workstation 6/350 (Series 0203) (CPL: 09/98 )
D5765N
and
D5765T
Pentium
II with
512 KB
of L2
cache
memory
64 MB
SDRAM
100 MHz
non-ECC
6.5 GB
Ultra
ATA
Matrox
Millennium G200
8 MB SGRAM
on board,
upgradable to
16 MB SGRAM
32✕ Max IDE
CD-ROM.
Audio chip
(AD1816) is
integrated on
the system
board.
None
D5767N
and
D5767T
9.1 GB
SCSI
10BT/
100TX
HP Kayak XA-s PC Workstation 6/400 (Series 0202) (CPL: 07/98 )
D5758N Pentium
II with
512 KB
of L2
cache
memory
64 MB
SDRAM
100 MHz
non-ECC
4.5 GB
SCSI
Matrox
Productiva G100
8 MB video
memory fitted.
Not Upgradable.
32✕Max IDE
CD-ROM.
Audio chip
(AD1816) is
integrated on
the system
board.
10BT/
100TX
HP Kayak XA-s PC Workstation 6/400 (Series 0203) (CPL: 09/98 )
D5768N
and
D5768T
Pentium
II with
512 KB
of L2
cache
memory
64 MB
SDRAM
100 MHz
non-ECC
9.1 GB
SCSI
Matrox
Millennium G200
8 MB SGRAM
on board,
upgradeable to
16 MB SGRAM
32✕ Max IDE
CD-ROM.
Audio chip
(AD1816) is
integrated on
the system
board.
10BT/
100TX
Product
Number
Cache
Memory
Std.
RAM
Hard
Drive
Video Controller Multi-media LAN
Ka_sh_1.bk Page 2 Thursday, June 15, 2000 7:27 PM

HP Kayak XA-s DT Series 02xx PC Workstation
Medium-Profile
Desktop
PC Workstations
HP Kayak XA-s DT Series 02xx PC
Workstation 7-3
7
HP Kayak XA-s PC Workstation 6/450 (Series 0203) (CPL: 09/98 )
D5763N
and
D5763T
Pentium
II with
512 KB
of L2
cache
memory
128 MB
SDRAM
100 MHz
non-ECC
10.1 GB
Ultra
ATA
Matrox
Millennium G200
8 MB SGRAM
on board,
upgradeable to
16 MB SGRAM
32✕ Max IDE
CD-ROM.
Audio chip
(AD1816) is
integrated on
the system
board.
10BT/
100TX
HP Kayak XA-s PC Workstation 6/450 (Series 0290) (CPL: 03/99 )
D7980N
and
D7980T
Pentium
II with
512 KB
of L2
cache
memory
128 MB
SDRAM
100 MHz
ECC
9.1 GB
SCSI
Matrox
Productiva
G100-Quad 16 MB
32✕ Max IDE
CD-ROM.
Audio chip
(AD1816) is
integrated on
the system
board.
10BT/
100TX
HP Kayak XA-s PC Workstation 6/400 (Series 0203) (CPL: 03/99 )
D7986N
and
D7986T
Pentium
II with
512 KB
of L2
cache
memory
64 MB
SDRAM
100 MHz
ECC
4.3 GB
Ultra
ATA
Matrox
Millennium G200
8 MB SGRAM
on board,
upgradeable to
16 MB SGRAM
32✕ Max IDE
CD-ROM.
Audio chip
(AD1816) is
integrated on
the system
board.
None
HP Kayak XA-s 7/xxx PC Workstation
HP Kayak XA-s PC Workstation 7/450 (Series 0290) (CPL: 04/99 )
D7990N
and
D7990T
Pentium
III with
512 KB
of L2
cache
memory
128 MB
SDRAM
100 MHz
ECC
9.1 GB
SCSI
Matrox
Productiva
G100-Quad 16 MB
32✕ Max IDE
CD-ROM.
Audio chip
(AD1816) is
integrated on
the system
board.
10BT/
100TX
Product
Number
Cache
Memory
Std.
RAM
Hard
Drive
Video Controller Multi-media LAN
Ka_sh_1.bk Page 3 Thursday, June 15, 2000 7:27 PM

HP Kayak XA-s DT Series 02xx PC Workstation
7-4 HP Kayak XA-s DT Series 02xx PC
Workstation
Medium-Profile
Desktop
PC Workstations
7
HP Kayak XA-s PC Workstation 7/450 (Series 0203) (CPL:04/99 )
D7991N
and
D7991T
Pentium
III with
512 KB
of L2
cache
memory
128 MB
SDRAM
100 MHz
ECC
10.1 GB
Ultra
ATA
Millennium G200
8 MB SGRAM
on board,
upgradeable to
16 MB SGRAM
32✕ Max IDE
CD-ROM.
Audio chip
(AD1816) is
integrated on
the system
board.
None
HP Kayak XA-s PC Workstation 7/500 (Series 0203) (CPL: 06/99 )
D7982N
and
D7982T
Pentium
III with
512 KB
of L2
cache
memory
128 MB
SDRAM
100 MHz
ECC
10.1 GB
Ultra
ATA
Millennium G200
8 MB SGRAM
on board,
upgradeable to
16 MB SGRAM
32✕ Max IDE
CD-ROM.
Audio chip
(AD1816) is
integrated on
the system
board.
None
HP Kayak XA-s PC Workstation 7/550 (Series 0203) (CPL: 07/99 )
D7987N
and
D7987T
Pentium
III with
512 KB
of L2
cache
memory
128 MB
SDRAM
100 MHz
ECC
10.1 GB
Ultra
ATA
Millennium G200
8 MB SGRAM
on board,
upgradeable to
16 MB SGRAM
32✕ Max IDE
CD-ROM.
Audio chip
(AD1816) is
integrated on
the system
board.
None
D6240AV Base Model. All models are ordered with optional components (such as,
processor, SDRAM memory modules, hard disk drives, graphic controller,
etc.).
Product
Number
Cache
Memory
Std.
RAM
Hard
Drive
Video Controller Multi-media LAN
Ka_sh_1.bk Page 4 Thursday, June 15, 2000 7:27 PM

HP Kayak XA-s DT Series 02xx PC Workstation
Medium-Profile
Desktop
PC Workstations
HP Kayak XA-s DT Series 02xx PC
Workstation 7-5
7
Supported Accessories
SDRAM 32MB 64bit 100MHz main memory (non-ECC) D6501A
SDRAM 64MB 64bit 100MHz main memory (non-ECC) D6502A
SDRAM 128MB 72bit 100MHz main memory (non-ECC) D6503A
SDRAM 64MB 72bit 100MHz main memory (unbuffered ECC) D6522A
SDRAM 128MB 72bit 100MHz main memory (unbuffered ECC) D6523A
SDRAM 256MB 72bit 100MHz main memory (unbuffered ECC) D6743A
Documentation
User’s Guide Manual D5750A
Input Devices
HP keyboard for Windows® 95 C4725A
HP Smart Card keyboard C4737A
HP mouse C3751B
HP mouse with scrolling wheel C4736A
Video Displays
All current HP PC Displays (refer to the Displays section of the Vectra
Accessory Service Handbook)
Mass Storage1
1. 10k tpm hard disk drives are not supported on desktop models.
4.3-GB 5400rpm Ultra ATA hard disk D2677A
6.5-GB 7200rpm Ultra ATA hard disk D6693A
10.1-GB 7200 rpm Ultra ATA/33 hard disk D6627A
4.5-GB 7200rpm Ultra SCSI hard disk D5368B
9.1 GB UW-SCSI hard disk 7.2k rpm (Low Profile) D6938A
32✕Max IDE CD-ROM drive D4384A
Atapi 100 MB Zip Drive D6650A
Processor Upgrades2
2. Dual Processor Kits include: processor, voltage regulator module and heatsink.
Intel Pentium II 266 MHz containing 512 KB internal L2 cache D5483A
Intel Pentium II 300 MHz containing 512 KB internal L2 cache D5484A
Intel Pentium II 333 MHz containing 512 KB internal L2 cache D6526A
Intel Pentium II 350 MHz containing 512 KB internal L2 cache D6527A
Intel Pentium II 400 MHz containing 512 KB internal L2 cache D6528A
Intel Pentium II 450 MHz containing 512 KB internal L2 cache D6529A
Intel Pentium III3450 MHz containing 512 KB internal L2 cache
3. In a dual-processor system, do not mix a Pentium III 450 MHz processor with a
Pentium II 450 MHz processor.
D7510A
Intel Pentium III 500 MHz containing 512 KB internal L2 cache D7511A
Intel Pentium III 550 MHz containing 512 KB internal L2 cache D7512A
Ka_sh_1.bk Page 5 Thursday, June 15, 2000 7:27 PM

HP Kayak XA-s DT Series 02xx PC Workstation
7-6 HP Kayak XA-s DT Series 02xx PC
Workstation
Medium-Profile
Desktop
PC Workstations
7
System Board, BIOS, and Memory
Switches
Processor 1
Up
Memory Modules
Power
Disk Drive Fan
External Battery
FDD
IDE 1 Connector
Internal Speaker
AUX
CD In Audio
Mic In
I/O Fan
Processor Fan
VRM 2
VRM 1
Processor 2
PCI Slots
ISA Slots
Down
AGP Slot
External Start
Wake On LAN
IDE 2 Connector
LCD Status Panel
Not used
Not used
LAN + SCSI Board
Video Board
Ka_sh_1.bk Page 6 Thursday, June 15, 2000 7:27 PM

HP Kayak XA-s DT Series 02xx PC Workstation
Medium-Profile
Desktop
PC Workstations
HP Kayak XA-s DT Series 02xx PC
Workstation 7-7
7
System Board Switches
BIOS History
For the latest BIOS, the flasher utility program, and the BIOS history refer to the
HP World Wide Web site. The BIOS is in the form HK11yyzz
yy= BIOS version number
zz = is the selected language to be downloaded
Switch Function Default
1Up
1
1. Up=Off, Down=On.
Reserved Up
2-5 - Processor frequency, see the following table -
6Up Retains Configuration Up
Down Clears CMOS (to reload the Setup program defaults)
7Up Enables passwords Up
Down Clears passwords
8Up Disables keyboard power-on Down
Down Enables keyboard power-on (normal operation)
9Up Minitower Down
Down Desktop
10 Up Enables normal mode Up
Down Enables recovery mode
Processor
Frequency
Local Bus
Frequency
(FSB)1
1. FSB = Front Side Bus
Switch Switch
2345
266 MHz 66 MHz Up Down Up Up
300 MHz 66 MHz Up Down Up Down
333 MHz 66 MHz Up Down Down Up
350 MHz 100 MHz Up Up Down Down
400 MHz 100 MHz Up Down Up Up
450 MHz 100 MHz Up Down Up Down
500 MHz 100 MHz Up Down Down Up2
2. For processors that are 500 MHz and higher, the frequency is imposed.
550 MHz 100 MHz Up Down Down Up2
600 MHz 100 MHz Up Down Down Up2
http://www.hp.com/go/kayaksupport
Ka_sh_1.bk Page 7 Thursday, June 15, 2000 7:27 PM

HP Kayak XA-s DT Series 02xx PC Workstation
7-8 HP Kayak XA-s DT Series 02xx PC
Workstation
Medium-Profile
Desktop
PC Workstations
7
Installing a Dual Processor / Replacing a Processor
HP Kayak XA-s PC Workstations are supplied with dual processor slots and
either one or two processors installed. Single processor models can be
upgraded to dual processor systems by installing the second processor
accessory in the vacant slot.
The second processor must be a processor of the same type, speed and level-2
cache memory capacity as the first. It is installed by gently sliding the processor
into the vacant processor connector slot until the two plastic clips at the sides
engage to lock the processor into place.
Every processor that is installed, or replaced, must be accompanied by the
voltage regulator module (VRM) that was supplied with it. Each VRM is specific
to the processor with which it was supplied, and should only be used with that
processor.
NOTE: After installation of a second processor, the operating
system must be reinstalled.
Plastic clips
Heat-sink
Bracket pillars
Ka_sh_1.bk Page 8 Thursday, June 15, 2000 7:27 PM

HP Kayak XA-s DT Series 02xx PC Workstation
Medium-Profile
Desktop
PC Workstations
HP Kayak XA-s DT Series 02xx PC
Workstation 7-9
7
The following tables explain how to perform supported processor upgrades. If
you need to install or upgrade to a Pentium III processor, refer to Table II on the
following page.
Table I - Pentium II Processor Upgrades
Dual Processor Upgrade
2 x
266 MHz
2 x
300 MHz
2 x
333 MHz
2 x
350 MHz
2 x
400 MHz
2 x
450 MHz
1x
266 MHz
D5483A
Add 2nd
D5483A1
1. Switch settings must be changed. Ensure that the latest BIOS version is installed.
Remove
266 MHz2
Add 2 x
D5484A1
2. Supplied processor must be removed.
Remove
266 MHz2
Add 2 x
D6526A1
Remove
266 MHz2
Add 2 x
D6527A1
Remove
266 MHz2
Add 2 x
D6528A1
Remove
266 MHz2
Add 2 x
D6529A1
1x
300 MHz
D5484A
Add (2nd)
D5484A1Remove 300 MHz2
Add 2 x
D6526A1
Remove
300 MHz2
Add 2 x
D6527A1
Remove
300 MHz2
Add 2 x
D6528A1
Remove
300 MHz 2
Add 2 x
D6529A1
1x
333 MHz
D6526A
Add 2nd
D6526A1Remove 333 MHz 2
Add 2 x
D6527A1
Remove
333 MHz2
Add 2 x
D6528A1
Remove
333 MHz2
Add 2 x
D6529A1
1x
350 MHz
D6527A
Add (2nd)
D6527A1Remove 350 MHz2
Add 2 x
D6528A1
Remove
350 MHz2
Add 2 x
D6529Ar1
1x
400 MHz
D6528A
Add (2nd)
D6528A1Remove 400 MHz2
Add 2 x
D6529A1
1x
450 MHz
D6529A
Add 2nd
D6529A 1
Ka_sh_1.bk Page 9 Thursday, June 15, 2000 7:27 PM

HP Kayak XA-s DT Series 02xx PC Workstation
7-10 HP Kayak XA-s DT Series 02xx PC
Workstation
Medium-Profile
Desktop
PC Workstations
7Cache Memory
512 KB of level-two cache memory is integrated in the Pentium II and
Pentium III processor package.
Table II - Pentium II to Pentium III Processor Upgrades
Dual Processor Upgrade
Pentium II
2x450 MHz
(D6529A)
Pentium III
2x450 MHz1
(D7510A)
1. DO NOT MIX a Pentium II 450 MHz processor (D6529A) with a Pentium III 450 MHz
processor (D7510A).
Pentium III
2x500 MHz
(D7511A)
Pentium III
2x550 MHz
(D7512A)
Pentium II
1x266 MHz (D5483A),
1x300 MHz (D5484A),
1x333 MHz (D6526A),
1x350 MHz (D6527A),
1x400 MHz (D6528A)
refer to Table I
- Pentium II
Processor
Upgrades on
the previous
page
Remove
processor3.
Add 2 x
D75102
Remove
processor3
Add 2 x
D7511A2
Remove
processor3
Add 2 x
D7512AA2
Pentium II
1x450 MHz
(D6529A)
Add 2nd
D6529A2
2. Switch settings must be changed. Ensure that the latest BIOS version has been installed.
Remove
D6529A3
Add 2 x
D7510A2
Remove
450 MHz3
Add 2 x
D7511A2
3. Supplied processor must be removed.
Remove
450 MHz3
Add 2 x
D7512A2
Pentium III
1x450 MHz
(D7510A)
Add 2nd
D75102Remove 450 MHz3
Add 2 x
D7511A2
Remove
450 MHz3
Add 2 x
D7512A2
Pentium III
1x500 MHz
(D7511A)
Add 2nd
D7511A2Remove 500 MHz3
Add 2 x
D7512A2
Pentium III
1x500 MHz
(D7512A)
Add 2nd
D7512A2
Ka_sh_1.bk Page 10 Thursday, June 15, 2000 7:27 PM

HP Kayak XA-s DT Series 02xx PC Workstation
Medium-Profile
Desktop
PC Workstations
HP Kayak XA-s DT Series 02xx PC
Workstation 7-11
7
Main Memory
The PC Workstation has three DIMM slots on the system board for installing
main memory. Models are supplied with 64 MB or 128 MB of main memory.
Memory upgrades are available in single 32 MB 64 MB, 128 MB and 256 MB ECC
unbuffered or non-ECC SDRAM modules.
Memory can be upgraded to a maximum of 768 MB using multiples of
(3 x 256 MB) of unbuffered or non-ECC SDRAM memory modules.
A serial EEPROM on each DIMM contains data on the memory speed. This
information is read at each power on, and access time settings are set
accordingly.
Video Memory
The graphics controller installed on the PC Workstation could be either a
Matrox Productiva G100, a Matrox Millennium G200 or a Matrox Productiva
G100-Quad.
The Matrox Productiva G100 has a total of 8 MB of video memory already
supplied on the graphics controller board which cannot be upgraded.
The Matrox Millennium G200 has a 8 MB of SGRAM memory already supplied
on the graphics controller board. Memory may be upgraded to a maximum of 16
MB by installing a 8 MB SGRAM memory module of onto the board.
The Matrox Productiva G100-Quad graphics card can support a multi-monitor
environment allowing for a custom-configured display solution of up to four
monitors at a time with a total of 16 MB of video memory (4 MB per monitor).
There are three possible configurations: horizontally, vertically, or in a square.
For the above mentioned graphics controllers, no switch or jumper settings
need to be changed (all jumpers should be left in the positions in which they
were set by the manufacturer).
Ka_sh_1.bk Page 11 Thursday, June 15, 2000 7:27 PM

HP Kayak XA-s DT Series 02xx PC Workstation
7-12 HP Kayak XA-s DT Series 02xx PC
Workstation
Medium-Profile
Desktop
PC Workstations
7
Identifying the LAN/SCSI Combination Board
On HP Kayak XA-s models with the LAN/SCSI combination board, one of two
types of the HP 10/100 SCSI/LAN combination board are installed.
Both LAN/SCSI combination boards have the same functionalities, but there are
some minor differences. Due to this reason, when replacing one board by
another (refer to the note on page 15), caution should be taken to ensure you
have the correct board.
Most HP Kayak XA-s models introduced around 07/98 (CPL) were preinstalled
with the LAN/SCSI combination board (part number 5064-3616) that included
one internal wide SCSI connector. This board does not include a Wake On Lan
(WOL) connector. For the Remote Power On (RPO) feature to work, the
ExtStart cable is used to connect between the External Start connector on the
SCSI/LAN combination board and the HP External Start connector on the
system board.
While, on the most recently introduced Kayak XA-s models, the SCSI/LAN
combination board (part number 5064-6016), includes two SCSI connectors,
one wide and one narrow. However, the internal narrow SCSI connector is not
used on XA-s models (wide SCSI cable used). The SCSI/LAN combination board
also includes a Wake On Lan (WOL) connector. The RPO feature is now made
available through the WOL connector, and no longer through the HP External
Start connector. The HP External Start connector is still used to report LAN
activity and SCSI hard disk drive accesses to the front panel LEDs.
How to Identify Which LAN/SCSI Board is Installed
As mentioned earlier, there is no difference between the rear panels of the two
SCSI/LAN boards. To identify which board is installed, you have to check the
board for the above mentioned differences. To do that:
1Shut down the PC Workstation, turn off the computer and disconnect the
power cable. Remove the cover.
2Check the part number:
5064-6016 — Includes two internal SCSI connectors (wide and narrow) and
a WOL connector.
5064-3616 — Includes one internal SCSI connector. The WOL connector is
not available on this board.
If replacing one LAN/SCSI combination board model by the other model, refer
to the note on page 15, for instructions.
Ka_sh_1.bk Page 12 Thursday, June 15, 2000 7:27 PM

HP Kayak XA-s DT Series 02xx PC Workstation
Medium-Profile
Desktop
PC Workstations
HP Kayak XA-s DT Series 02xx PC
Workstation 7-13
7
Parts and Part Numbers
5
4
8
19
6
7
15
9
11
12
16
13
14
18
20
2
1a
1b
1c
1part of
chassis
1e
3a
3b
17
1d
0
10
2a
1f
1g
Ka_sh_1.bk Page 13 Thursday, June 15, 2000 7:27 PM

HP Kayak XA-s DT Series 02xx PC Workstation
7-14 HP Kayak XA-s DT Series 02xx PC
Workstation
Medium-Profile
Desktop
PC Workstations
7
Parts List
Item Description Repl.
Part Number
Exchange
Part Number
0Box assembly (also includes items 3 &12) 5065-1250 —
1Chassis assembly:
a Cover lock assembly
b Serial number label
c I/O blank panel
d System board guide
e Speaker
f I/O Guide Assembly with fan
g I/O Card Guide and fan assembly
Not shown
Hard Disk Drive Fan
Front bezel assembly
Bumper Foot
5064-3392
5062-5590
5182-0030
45935-00004
5042-1859
5063-4559
5064-6055
5064-6721
5064-3349
5064-6058
5042-2479
—
—
—
—
—
—
—
—
—
—
—
2Cover Assembly
a Filler Panel
5064-3394
5042-1178
—
—
3a Upper processor airflow guide
b Lower processor airflow guide + fan
5042-3001
5064-6059
—
—
4Standard hard disk drive1
4.3 GB IDE 5400rpm D2677-63001 D2677-69001
6.5 GB IDE 7200rpm D6452-63001 D6452-69001
10.1-GB IDE 7200 rpm D6627-63101 D6627-69001
4.5 GB SCSI (3.5-inch) 7200 rpm D5095-63001 D5095-69001
9.1 GB UW-SCSI 7.2k rpm (Low Profile) D6455-63001 D6455-69001
4.5 GB IDE 7200rpm D9796-63001 D9796-69001
10.1 GB IDE 7200rpm D9795-63001 D9795-69001
5Ultra ATA hard disk cable
5064-6068 —
IDE CD-ROM cable
63.5-inch Rail kit 5063-7922 —
75.25-inch Rail kit 5002-4717 —
8Flexible disk drive (bezel-less) D2035-60172 —
9Flexible disk drive cable 5183-2706 —
10 32✕IDE CD-ROM drive D4384-63001 D4384-69001
11 Power supply unit 0950-2892 —
12 Status panel with LED display 5064-6727 —
13 System board See PC’s system board parts list
Ka_sh_1.bk Page 14 Thursday, June 15, 2000 7:27 PM

HP Kayak XA-s DT Series 02xx PC Workstation
Medium-Profile
Desktop
PC Workstations
HP Kayak XA-s DT Series 02xx PC
Workstation 7-15
7
14 Graphics board:
a Matrox Productiva G100 (8 MB)
b Not shown on previous page:
a Matrox Millennium G200 (8 MB)
b Matrox Productiva G100-Quad
Dual monitor cable (2)
G100-Quad cable kit (2 Y-cables)
c Gloria Synergy AGP
5756-63501
5064-7478
5064-7427
5064-7426
5183-9475
—
D5756-69501
D5685-69501
D7980-69501
—
—
D6478-69501
15 CD-ROM to audio connector cable 5182-1857 —
16 Headset (supported only on models
shipped before December, 1998)
5064-2673 —
17 SCSI cable (16-bit data) for SCSI models
only
5183-2702 —
18 a HP 10/100 BT SCSI/PCI LAN Board2HP
10/100 BT SCSI/PCI LAN Board
5064-3616
5064-6016
D5755-69001
D6331-69301
19 a Internal LAN-to-CPU cable
b WOL cable
c Internal LAN-to-CPU cable
5183-2786
5183-2769
5183-6090
—
—
—
20 2-button Mouse with scrolling wheel C4736-60101 —
Not
Shown
a XA-s PC Workstation logo
b HP Logo
5042-3022
5042-3030
—
—
Enhanced Keyboard C4734-603xx3
Japanese Keyboard C4729-60224 —
Screw 6-32 for rails 2680-0311 —
Screw 6-32 for card cage and chassis 2360-0565 —
1. For optional disk drive information, see the Accessories section of this Service Handbook.
2. If replacing the HP 10/100 BT SCSI/PCI LAN board 5064-3616 by the 5064-6016, the WOL
cable is required and the Internal LAN-to-CPU cable 5183-2786 is replaced by the
5183-6090.
3. Where “xx” is the code for your national keyboard (refer to the Accessories section of this
Service Handbook).
Parts List
Item Description Repl.
Part Number
Exchange
Part Number
Ka_sh_1.bk Page 15 Thursday, June 15, 2000 7:27 PM

HP Kayak XA-s DT Series 02xx PC Workstation
7-16 HP Kayak XA-s DT Series 02xx PC
Workstation
Medium-Profile
Desktop
PC Workstations
7
System Board Parts List
Description Repl.
Part Number
Exchange
Part Number
System board:
XA-s 6/xxx system board
Processor Terminator
D7981-60001
5064-2680
D5756-69001
Processors:
Intel Pentium II 266 MHz, 512 KB cache 5064-2652 —
Intel Pentium II 300 MHz, 512 KB cache 5064-3330 —
Intel Pentium II 333 MHz, 512 KB cache 5064-3697 —
Intel Pentium II 350 MHz, 512 KB cache D6527-63001 D6527-69001
Intel Pentium II 400 MHz, 512 KB cache D6528-63001 D6528-69001
Intel Pentium II 450 MHz, 512 KB cache D6529-63001 D6529-69001
Intel Pentium III 450 MHz, 512 KB cache D7510-63001 —
Intel Pentium III 500 MHz, 512 KB cache D7511-63001 —
Intel Pentium III 550 MHz, 512 KB cache D7512-63001 —
Voltage Regulator module (VRM) 0950-2837 —
Main memory modules:
SDRAM 32MB 100MHz non-ECC D6501-63001 —
SDRAM 64MB 100MHz non-ECC D6502-63001 —
SDRAM 64MB 100 MHz ECC 1818-7140 D5365-69001
SDRAM 128MB 100 MHz non-ECC D6503-63001 D6503-69001
Manuals and Documentation
Description Part Number
User’s Guide D5750-90001 Paper document
Familiarization Guide D5750-90901 Electronic file (PDF)
Technical Reference Manual no number Electronic file (PDF)
ConfigTailor CD-ROM 5011-6634 —
Ka_sh_1.bk Page 16 Thursday, June 15, 2000 7:27 PM

Beep, POST, and Error Codes A-1
A
A
Beep, POST, and Error Codes
Beep Codes
If an error occurs during the POST, which prevents the PC Workstation from
starting, and before the display device has been initialized, a series of beep
codes are issued. Beep codes indicate that a fatal error has occurred and can be
reported one after another if there is more than one detected error. In this case,
the first detected error is the most important.
These codes are useful for identifying the error when the system is unable to
display the error message.
Ka_sh_1.bk Page 1 Thursday, June 15, 2000 7:27 PM

A-2 Beep, POST, and Error Codes
A
Beep Codes for the HP Kayak XU800
Number
of
Beeps
Description Action to Take...
1 The memory refresh
circuitry is faulty.
Check that:
• Memory is installed correctly.
• Correct memory modules are being used.
If the error still occurs, replace the memory.
2 Parity error in the base
memory (the first 64 KB
block) of memory.
3 Memory error.
4 Clock error. • Check that the system board is correctly
cabled (power cables, processor and
terminator).
If the error still occurs, replace the system
board.
5 Processor test error. Check that:
• Processor is correctly installed.
• Termination card installed in processor
slot 2 in a single processor system.
If the error still occurs, replace:
1Processor.
2 system board.
6 Input/Output (I/O) error. • Keyboard is connected.
• PCI card is installed correctly.
• Termination card installed in processor
slot 2 in a single processor system.
7 The processor on the
system board generated
an error.
• There is an installed processor(s).
• Processor(s) is correctly installed in the
processor slot(s).
• Two installed processors have the same
cache size (256 k).
• Termination card is installed in processor
slot 2 in a single processor system.
• VRM is installed in the VRM socket in a
dual processor system.
If the error still occurs, replace the system
board.
8 The system video card is
either missing or faulty.
This is not a fatal error. Check that the video
card is correctly installed and cabled. If
missing, install the video card. If the error
still occurs, replace it with a known working
video card.
Ka_sh_1.bk Page 2 Thursday, June 15, 2000 7:27 PM

Beep, POST, and Error Codes A-3
A
9 The BIOS Checksum
value does not match the
value encoded in the
BIOS.
Perform the following actions in this order:
1PressF2 to enter the Setup program,
then F9 to load the default BIOS settings.
2 Clear the CMOS.
3 Flash the BIOS.
If the error still occurs, replace the system
board.
10 The CMOS RAM has
failed.
Perform the following actions in this order:
1PressF2 to enter the Setup program,
then F9 to load the default BIOS settings.
2 Clear the CMOS.
3 Flash the BIOS.
If the error still occurs, replace the system
board.
11 The cache memory test
failed.
Replace the processor(s).
Number
of
Beeps
Description Action to Take...
Ka_sh_1.bk Page 3 Thursday, June 15, 2000 7:27 PM