HP Pavilion23 Installation instructions

EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
HP Pavilion23 All-in-One PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in
product
Printed Circuit Boards (PCB) or Printed
Circuit Assemblies (PCA)
With a surface greater than 10 sq cm
Part22,Part45,Part73,Part78,Part86,Part102,Part120,Part134
8
Batteries
All types including standard alkaline and lithium coin or
button style batteries
Part29(CR2032),Part99(AAA),Part110(AA)
5
Mercury-containing components
For example, mercury in lamps, display backlights, scanner
lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Includes background illuminated displays with gas discharge
lamps Part53 (LED displays,no lamps)
1
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing
PCB/PCT)
0
Electrolytic Capacitors / Condensers
measuring greater than 2.5 cm in diameter or
height
Part135(Electrolytic Capacitor)
1
External electrical cables and cords
Part124(Adapter Cable),Part136(Power Coard)
2
Gas Discharge Lamps
0
Plastics containing Brominated Flame
Retardants weighing > 25 grams (not
including PCBs or PCAs already listed as a
separate item above)
0
Components and parts containing toner and
Include the cartridges, print heads, tubes, vent chambers,
0

EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01
ink, including liquids, semi-liquids (gel/paste)
and toner
and service stations.
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Screwdriver, Lever, Star Screwdriver(six)
NA
Slanted Pliers, Pliers
NA
Hammer
NA
Knife
NA
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. AIO PC
2. LCD
3. Thermal Fan
4. ODD
5. HDD
6. Keyboard
7. Mouse
8. Power Adapter and Cable
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
A
1
Metal piece
Metal
1
Snap,
Adhesive,
Screwdriver,
Lever,
74

EL-MF877-00 Page 3
Template Revision B
PSG instructions for this template are available at EL-MF877-01
2
Screw
Metal
9
Screw
Slanted pliers,
Pliers
3
Metal plank
Metal
178
4
Conductive
Anti-Static Foam
Mix
1
5
Plastic piece
Plastic
4
6
Metal plank
Metal
371
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
A
7
Plastic piece
Plastic
19
8
Metal piece
Metal
107
9
Metal plank
Metal
53
10
Plastic case
Plastic
75

EL-MF877-00 Page 4
Template Revision B
PSG instructions for this template are available at EL-MF877-01
11
Nut
Metal
1
12
Plastic case
Plastic
596
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
A
13
Label
Plastic
1

EL-MF877-00 Page 5
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
B
14
Screw
Metal
41
Plug, Solder,
Adhesive,
Screw
Screwdriver,
Lever,
Star Screwdriver (six),
Slanted pliers,
Knife
254
15
Metal piece
Metal
1
16
Spring
Metal
1
17
Speaker
Mix
128
18
Conductive
Anti-Static Foam
Mix
2
19
Plastic sheet
Plastic
1
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)

EL-MF877-00 Page 6
Template Revision B
PSG instructions for this template are available at EL-MF877-01
B
20
Label
Plastic
1
Part 22 is a
PCBA. The
surface of
part 22 is
greater than
10 square
centimeters.
According to
WEEE
(recast)
directive, part
22 requires
selective
treatment.
21
Metal case
Metal
507
22
PCBA
PCBA
317
23
Metal piece
Metal
130
24
Plastic ring
Plastic
1
25
Plastic piece
Plastic
1
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
B
26
Wire
Cable/wir
e
48
Part 29 is a
battery.
According to
WEEE
(recast)
directive, part
29 requires
27
Metal plank
Metal
127
28
Plastic pad
Plastic
4

EL-MF877-00 Page 7
Template Revision B
PSG instructions for this template are available at EL-MF877-01
29
Cell battery
Battery
3
selective
treatment.
30
Plastic piece
Plastic
1
31
Plastic pad
Plastic
4
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
B
32
Metal frame
Metal
222

EL-MF877-00 Page 8
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
C
33
Screw
Metal
12
Adhesive,
Screw
Lever,
Slanted pliers,
Knife
75
34
Plastic pad
Plastic
8
35
PCBA
PCBA
1
36
PCBA
PCBA
1
37
Metal piece
Metal
1
38
Nut
Metal
3

EL-MF877-00 Page 9
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
C
39
Metal plank
Metal
1503
40
Plastic frame
Plastic
252

EL-MF877-00 Page 10
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
D
41
Label
Plastic
1
Snap,
Adhesive,
Screw
Screwdriver,
Knife
162
Part 45 is a
PCBA. The
surface of
part 45 is
greater than
10 square
centimeters.
According to
WEEE
(recast)
directive, part
45 requires
selective
treatment.
42
Textile
Mix
1
43
Plastic sheet
Plastic
4
44
Plastic piece
Plastic
5
45
PCBA
PCBA
25
46
Metal case
Metal
1057
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
D
47
Film
Plastic
57
48
Film
Plastic
57

EL-MF877-00 Page 11
Template Revision B
PSG instructions for this template are available at EL-MF877-01
49
Film
Plastic
43
50
Plastic sheet
Plastic
366
51
Film
Plastic
33
52
Plastic frame
Plastic
40
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
D
53
LCD
LCD
450
Part 53 is a
LCD.
According to,
The surface
of part 53 is
greater than
100 square
centimeters.
According to
WEEE
(recast)
directive, part
53 requires
54
Metal frame
Metal
119

EL-MF877-00 Page 12
Template Revision B
PSG instructions for this template are available at EL-MF877-01
selective
treatment.
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
E
55
Screw
Metal
1
Solder,
Adhesive,
Screw
Screwdriver,
Lever,
Slanted pliers,
Knife
21
56
Label
Plastic
1
57
Textile
Mix
1
58
Metal plank
Metal
28

EL-MF877-00 Page 13
Template Revision B
PSG instructions for this template are available at EL-MF877-01
59
Wire
Cable/wir
e
1
60
PCBA
PCBA
14
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
E
61
Plastic case
Plastic
28
62
Metal ring
Metal
3
63
Plastic ring
Plastic
5
64
Plastic piece
Plastic
8
65
Metal piece
Metal
2
66
Metal piece
Metal
1
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Tool
Time

EL-MF877-00 Page 14
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Technique
(s.)
E
67
Metal piece
Metal
1
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Tool
Time

EL-MF877-00 Page 15
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Technique
(s.)
F
68
Screw
Metal
1
Plug, Solder,
Snap,
Adhesive,
Screw
Screwdriver,
Lever,
Star Screwdriver (six),
Slanted pliers,
Knife
96
Part 73 is a
PCBA. The
surface of
part 73 is
greater than
10 square
centimeters.
According to
WEEE
(recast)
directive, part
73 requires
selective
treatment.
69
Spring
Metal
1
70
Label
Plastic
1
71
Plastic piece
Plastic
1
72
Metal piece
Metal
1
73
PCBA
PCBA
7
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
F
74
FPC
Cable/wir
e
1
Part 78 is a
PCBA. The
surface of
part 78 is
greater than
10 square
centimeters.
75
Metal case
Metal
56
76
Metal piece
Metal
14

EL-MF877-00 Page 16
Template Revision B
PSG instructions for this template are available at EL-MF877-01
77
Electronic
component
Mix
12
According to
WEEE
(recast)
directive, part
78 requires
selective
treatment.
78
FPCA
PCBA
8
79
Electronic
component
Mix
5
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
F
80
Plastic case
Plastic
43

EL-MF877-00 Page 17
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
G
81
Screw
Metal
6
Adhesive,
Screw
Lever,
Star Screwdriver (six),
Knife
119
Part 86 is a
PCBA. The
surface of
part 86 is
greater than
10 square
centimeters.
According to
WEEE
(recast)
directive, part
86 requires
selective
treatment.
82
Label
Plastic
1
83
Textile
Mix
1
84
Sponge
Plastic
1
85
Plastic piece
Plastic
1
86
PCBA
PCBA
16

EL-MF877-00 Page 18
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
G
87
Metal plank
Metal
59
88
Connector
Mix
1
89
Plastic piece
Plastic
1
90
Metal piece
Metal
3
91
Metal plank
Metal
38
92
Metal case
Metal
233
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
G
93
Metal plank
Metal
23
94
FPCA
PCBA
13

EL-MF877-00 Page 19
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
H
95
Metal piece
Metal
0.07
Plug, Snap,
Adhesive,
Screw
Screwdriver,
Knife
139
Part 99 is a
battery.
According to
WEEE
(recast)
96
Plastic pad
Plastic
2.67

EL-MF877-00 Page 20
Template Revision B
PSG instructions for this template are available at EL-MF877-01
97
Screw
Metal
9.4
directive, part
99 requires
selective
treatment.
98
Battery cover
Plastic
2.93
99
Battery
Battery
23.44
100
Metal piece
Metal
4.55
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
H
101
Wire
Cable/wir
e
1.54
Part 102 is a
PCBA. The
surface of
part 102 is
greater than
10 square
centimeters.
According to
WEEE
(recast)
directive, part
102 requires
102
PCBA
PCBA
9.26
103
Plastic piece
Plastic
0.84
104
Plastic piece
Plastic
0.46
105
Plastic pad
Plastic
18.87