HP Pro 1000 Series Installation instructions

EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
HP Pro 1000 Series All-in-One (AIO) PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
8
Batteries
All types including standard alkaline and lithium coin
or button style batteries (on motherboard)
1
Mercury-containing components For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries (in display)
4
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps (panel)
1
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
power cord
1
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
External power supply case
1
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers

EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Screwdriver
Lever
Star Screwdriver
Slanted pliers
Knife
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Product Information
2. Disassembly Procedure
3.
4.
5.
6.
7.
8.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
1. Product Information

EL-MF877-00 Page 3
Template Revision B
PSG instructions for this template are available at EL-MF877-01
The product is a AIO-PC. The weight of this product excluding package is 5101.79 g.
The appearance of the product is as follows:
2. Disassembly Procedure
3.1 Flow Chart for Disassembly Procedure:
The disassembly procedure taken here is in accordance with the treatment requirements under the Annex II of
the WEEE Directive. In addition to considering economic and efficiency factors, manual operation and
disassembly tools have been applied to separate the components and materials from this product in order to
simulate the scenario at the treatment facility, and to achieve the objective that the separated components and
materials can be reused, recycled and recovered.

EL-MF877-00 Page 4
Template Revision B
PSG instructions for this template are available at EL-MF877-01

EL-MF877-00 Page 5
Template Revision B
PSG instructions for this template are available at EL-MF877-01

EL-MF877-00 Page 6
Template Revision B
PSG instructions for this template are available at EL-MF877-01

EL-MF877-00 Page 7
Template Revision B
PSG instructions for this template are available at EL-MF877-01
3.1 Flow Chart for Disassembly Procedure:
The material declaration for this product, the disassembly tools and the disassembly time are described in the
following table.

EL-MF877-00 Page 8
Template Revision B
PSG instructions for this template are available at EL-MF877-01

EL-MF877-00 Page 9
Template Revision B
PSG instructions for this template are available at EL-MF877-01

EL-MF877-00 Page 10
Template Revision B
PSG instructions for this template are available at EL-MF877-01

EL-MF877-00 Page 11
Template Revision B
PSG instructions for this template are available at EL-MF877-01

EL-MF877-00 Page 12
Template Revision B
PSG instructions for this template are available at EL-MF877-01

EL-MF877-00 Page 13
Template Revision B
PSG instructions for this template are available at EL-MF877-01

EL-MF877-00 Page 14
Template Revision B
PSG instructions for this template are available at EL-MF877-01

EL-MF877-00 Page 15
Template Revision B
PSG instructions for this template are available at EL-MF877-01

EL-MF877-00 Page 16
Template Revision B
PSG instructions for this template are available at EL-MF877-01