HP Compaq Presario Manual

Maximizing Battery Operating Time
The Presario 800 with Intel Pentium® III processor supports SpeedStep™
Technology. This technology supports two different modes of operation.
The default settings are:
• Performance Mode—the processor runs at maximum speed if the notebook
is powered on while connected to an AC power source
• Battery Optimized Mode—the processor runs at lower speed to maximize
battery operating time if the notebook is powered on with a battery source
To automatically change the processor settings when changing power sources
(from AC to battery or battery to AC) without rebooting the notebook, you
must install the SpeedStep™ application.
To install the application, follow these steps:
1. At the Windows desktop, press F1 or select Start, Help.
2. Move the mouse pointer over the Selective Restore icon.
3. Click on the Intel SpeedStep icon.
4. Click Yes to install the software.
5. Re-Start your computer for the application to take effect.
NOTE: SpeedStepis not supported on Intel Celeron processors.

NOTICE
The information in this card is subject to change without notice.
COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR
TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED
HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF
THIS MATERIAL.
This card contains information protected by copyright. No part of this card
may be photocopied or reproduced in any form without prior written consent
from Compaq Computer Corporation.
© 2001 Compaq Computer Corporation.
Compaq and the Compaq Logo Registered with the U.S. Patent and Trademark Office. Printed in
the U.S.A., Brazil, Canada, Japan, Korea, Singapore, Taiwan and the U.K.
Product names mentioned herein may be trademarks and/or registered trademarks of their
respective companies.
First Edition, January 2001