HP L1740 User instructions

1. Auto Adjust 4. OSD Navigation/Input Select
2. Menu/Select 5. Power
3. OSD Navigation/Input Select
Models
Part Number: PL766AA
QuickSpecs
HP L1740 Flat Panel Monitor
Overview
DA - 12127 Worldwide QuickSpecs — Version 17 — 5.23.2007 Page 1

Panel Type Active matrix, thin film transistor (TFT)
Viewable Image Area
(diagonal)
17 in (43.2 cm)
Screen Opening (WxH) 13.4 x 10.7 in (34.0 x 27.2 cm)
Viewing Angle (typical)* Up to 150° horizontal/135° vertical (10:1 minimum contrast ratio)
Brightness (typical)* 300 nits (cd/m
2
)
Contrast Ratio (typical)* 500:1
Response Rate
(typical)*
5 ms (rise + fall)
Pixel Pitch 0.264 mm
Backlight Lamp Life
(to half brightness)
40K hours
* All performance specifications represent the typical specifications provided by HP's component
manufacturers; actual performance may vary either higher or lower.
Video/Other Inputs Plug and Play Yes (supports VESA DDC2B and DDC/CI; PC2001 compliant)
USB 2.0 Hub Self-powered; one upstream, two downstream ports (cable included)
Input Signal Two connectors: one 15-pin mini D-sub analog VGA and one DVI-D
Input Impedance 75 ohms ± 2%
Sync Input Separate sync (HSYNC/VSYNC)
Video Cable 15-pin D-sub mini connector; detached
Video Cable Length 70.9 in (1.8 m); detached
Signal Interface/
Performance
Horizontal Frequency 30 to 83 kHz
Vertical Frequency 56 to 76 Hz
Native Resolution 1280 x 1024 @ 60 Hz (analog)
1280 x 1024 @ 60 Hz (digital)
Max Resolution
(Analog)
1280 x 1024 @ 75 Hz
Max Resolution (Digital) 1280 x 1024 @ 75 Hz
Preset VESA Graphic
Modes (non-interlaced)
640 x 480 @ 60 Hz, 72 Hz, 75 Hz
720 x 400 @ 70 Hz
800 x 600 @ 60 Hz, 72 Hz, 75 Hz
1024 x 768 @ 60 Hz, 70 Hz, 75 Hz
1280 x 1024 @ 60 Hz, 75 Hz
Preset MAC Mode 832 x 624 @ 75 Hz
1152 x 870 @75 Hz
Preset SUN Mode 1152 x 900 @ 76 Hz
Fail Safe Mode Yes (limits out of range signal messages)
Maximum Pixel Clock
Speed
140 MHz
User Programmable
Modes
Yes, 15
Anti-Glare Yes
Anti-Static Yes
AssetControl Yes (accessible on HP Compaq Business Desktops featuring HP Client
Manager)
Default Color
Temperature
6500° Kelvin
QuickSpecs
HP L1740 Flat Panel Monitor
Technical Specifications
DA - 12127 Worldwide QuickSpecs — Version 17 — 5.23.2007 Page 2

On Screen Display
(OSD) Controls
Buttons and Switches 4-button OSD (auto-adjust, menu, minus, plus); power on/off; second-
level OSD buttons include dual-input switch
Languages English, Spanish, French, German, Dutch, Italian, Simplified Chinese
User Controls Size and positioning, contrast, brightness, clock, clock phase,
selectable color temperature, serial number, mode displayed, sleep
timer, input selection, factory reset, individual color contrast, full-screen
resolution
Power Power Supply Auto-ranging, 90 to 265 VAC; internal power supply
Input Power 100 ~ 240 VAC
Nominal Current 1.5 A maximum
Frequency 50 ~ 60 Hz
Avg. Power
Consumption
~33 watts (when displaying standard office applications)
Typ. Power
Consumption
< 40 watts
Max. Power
Consumption
< 60 watts
Power Saving Mode < 2 watts
Off Mode < 2 watts
Power Cable Length 74.8 in (1.9 m); detached
Mechanical Dimensions (H x W x D) Packaged 17.5 x 17.5 x 8.5 in (44.5 x 44.5 x 21.6 cm)
Unpacked with stand
(minimum height)
13.8 x 14.6 x 10.5 in (35.1 x 37.1 x 26.7 cm)
Unpacked with stand
(maximum height)
19.3 x 14.6 x 9.75 in (49.0 x 37.1 x 24.8 cm)
Base area (footprint) 11.75 x 9.75 in (29.8 x 24.8 cm)
Panel only (without
stand)
12.4 x 14.6 x 2.5 in (31.5 x 37.1 x 6.4 cm)
Weight Packaged 19.5 lb (8.8 kg)
Unpacked with stand 15.4 lb (7.0 kg)
Panel Only (without
stand)
8.3 lb (3.76 kg)
Bezel Width 17 mm left and right, 17 mm top, and 24 mm bottom
Tilt Range -5° to +35°
Swivel Range ± 170° horizontal swivel
Height Adjustable Yes (5.1 in/13 cm adjustment range)
Pivot Rotation Yes, 90° into portrait orientation
Base Ships attached and is removable (four screws)
Environmental Temperature –
Operating
41° to 95° F (5° to 35° C)
Temperature –
Non-operating
-4° to 140° F (-20° to 60° C)
Humidity – Operating 20% to 80%, non-condensing
Humidity –
Non-operating
5% to 90%
Altitude – Operating 0 to 12,000 ft (0 to 3,658 m)
QuickSpecs
HP L1740 Flat Panel Monitor
Technical Specifications
DA - 12127 Worldwide QuickSpecs — Version 17 — 5.23.2007 Page 3

Altitude –
Non-operating
0 to 40,000 ft (0 to 12,192 m)
Environmental Data Eco-Label
Certifications and
Declarations
This product has received or is in the process of being certified to the
following approvals and may be labeled with one or more of these
marks:
US Energy Star
IT ECO declaration
TCO 03
CECP
Energy Consumption
(in accordance with US
Energy Star test method)
AC Input Voltage at
100 VAC +/- 5 VAC, 50
Hz +/- 3 Hz
AC Input Voltage at
115 VAC +/- 5 VAC, 60
Hz +/- 3 Hz
AC Input Voltage at
230 VAC +/- 5 VAC, 50
Hz +/- 3 Hz
Normal Operation 24 watts 24 watts 24 watts
Sleep 0.7 watts 0.8 watts 1.0 watts
Off 0.7 watts 0.7 watts 0.9 watts
Heat Dissipation * 100 VAC, 50 Hz 115 VAC, 60 Hz 230 VAC, 50 Hz
Normal Operation 82.1 BTU/hr 82.1 BTU/hr 82.1 BTU/hr
Sleep 2.4 BTU/hr 2.7 BTU/hr 3.4 BTU/hr
Off 2.4 BTU/hr 2.4 BTU/hr 3.1 BTU/hr
*NOTE : Heat dissipation is calculated based on the measured watts, assuming the service level is
attained for one hour.
Longevity and
Upgrading
Upgradeability features contained in the product include:
Two USB ports
Ergonomics The monitor meets the ergonomic requirement of EN-ISO 13406-2 for
flat panel displays.
Additional Information This product is in compliance with the Restrictions of Hazardous
Substances (RoHS) Directive, 2002/95/EC.
This HP product is designed to comply with the Waste Electrical and
Electronic Equipment (WEEE) Directive, 2002/96/EC.
Display meets Energy Star requirement for capability of going to low
power state(s) as controlled by CPU Power Management settings.
Plastics parts weighing over 25 grams used in the product are marked
per ISO 11469 and ISO1043.
Display meets the requirement for low frequency electromagnetic fields
per MPR-II and TCO.
This product contains 0% recycled materials (by wt.)
This product is 98% recycleable when properly disposed of at end of
life.
Packaging Materials
Corrugated – 0.95 kg
Plastic (other) – 0.142 kg
Polystyrene – 0.664 kg
Material Usage This product does not contain any of the following substances in excess
of regulatory limits (refer to the HP General Specification for the
Environment at
QuickSpecs
HP L1740 Flat Panel Monitor
Technical Specifications
DA - 12127 Worldwide QuickSpecs — Version 17 — 5.23.2007 Page 4

http://www.hp.com/hpinfo/globalcitizenship/environment/
supplychain/gen_specifications.html ):
Asbestos
Certain Azo Colorants
Certain Brominated Flame Retardants – may not be used as
flame retardants in plastics
Cadmium
Chlorinated Hydrocarbons
Chlorinated Paraffins
Formaldehyde
Halogenated Diphenyl Methanes
Lead carbonates and sulfates
Lead and Lead compounds
Mercuric Oxide Batteries
Nickel – finishes must not be used on the external surface
designed to be frequently handled or carried by the user.
Ozone Depleting Substances
Polybrominated Biphenyls (PBBs)
Polybrominated Biphenyl Ethers (PBBEs)
Polybrominated Biphenyl Oxides (PBBOs)
Polychlorinated Biphenyl (PCB)
Polychlorinated Terphenyls (PCT)
Polyvinyl Chloride (PVC) – except for wires and cables, and
certain retail packaging has been voluntarily removed from most
applications.
Radioactive Substances
Tributyl Tin (TBT), Triphenyl Tin (TPT), Tributyl Tin Oxide (TBTO)
Packaging HP follows these guidelines to decrease the environmental impact of
product packaging:
Eliminate the use of heavy metals such as lead, chromium,
mercury and cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in
packaging materials.
Design packaging materials for ease of disassembly.
Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and
corrugated materials.
Reduce size and weight of packages to improve transportation
fuel efficiency.
Plastic packaging materials are marked according to ISO 11469
and DIN 6120 standards.
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return and recycling
programs in many geographic areas. To recycle your product, please
go to: http://www.hp.com/recycle or contact your nearest HP sales
office. Products returned to HP will be recycled, recovered or disposed
of in a responsible manner.
Hewlett-Packard
Corporate
Environmental
Information
For more information about HP's commitment to the environment:
Global Citizenship Report
http://www.hp.com/hpinfo/globalcitizenship/gcreport/index.html
Eco-label certifications
http://www.hp.com/hpinfo/globalcitizenship/environment/
productdesign/ecolabels.html
ISO 14001 certificates:
http://www.hp.com/hpinfo/globalcitizenship/environment/
operations/envmanagement.html
QuickSpecs
HP L1740 Flat Panel Monitor
Technical Specifications
DA - 12127 Worldwide QuickSpecs — Version 17 — 5.23.2007 Page 5

Options HP Silver Flat Panel
Speaker Bar – Part
number: EE418AA
Powered directly by the monitor or PC, the Speaker Bar seamlessly
attaches to the monitor's lower bezel to bring full audio support to select
HP flat panel monitors. Features include dual speakers with full sound
range and external jack for headphones. Sold separately. For more
information, refer to the HP Silver Flat Panel Speaker Bar QuickSpec
document.
HP Compaq 7000
Series Ultra-slim
Desktop Integrated
Work Center Stand –
Part number: DL641B
Allows mounting of a 15-, 17- or 19-inch HP flat panel monitor and an
HP Compaq dc7600 Ultra-slim Desktop PC on a single stand for the
convenience of an "all-in-one" form factor. Sold separately. For more
information, refer to this product's QuickSpec document.
HP Flat Panel Monitor
Quick Release – Part
number: EM870AA*
An easy-to-use, VESA-compliant, flat panel monitor mounting solution
that allows you to quickly and securely attach a flat panel monitor to a
variety of stands, brackets, arms or wall mounts. For more information,
refer to this product's QuickSpec document.
* The HP Flat Panel Monitor Quick Release has been designed to support a maximum of up to 24
lbs (10.9 kg) depending upon the mounting configuration used. Please note this is a total weight
limit for all devices mounted, i.e. the combined weight of the monitor and a second device such as
the HP Compaq t5000 Series Thin Client cannot exceed 24 pounds. Because mounting surfaces
vary widely and the final mounting method and configuration may vary, mounting fasteners are not
supplied (other than the VESA-compliant screws). HP recommends that you consult with a
qualified engineering, architectural or construction professional to determine the appropriate type
and quantity of mounting fasteners required for your application and to ensure that your mounting
solution is properly installed to support applied loads.
Other Accessories Included VGA cable, AC power cord, USB cable, user CD-ROM
Software HP Display LiteSaver feature allows you to schedule Sleep mode at
preset times to help protect the monitor against image retention,
drastically lower power consumption and energy costs, and extend the
lifespan of the monitor.
HP Display Assistant is a software utility that allows monitor adjustment
and color calibration using the Display Data Channel Command
Interface (DDC/CI) protocol of the connected PC.
User Guide Languages English, French, German, Spanish, Italian, Dutch, Brazilian Portuguese,
Danish, Finnish, Greek, Japanese, Korean, Latin American Spanish,
Norwegian, Polish, Russian, Slovenian, Turkish, Swedish, Traditional
Chinese, Simplified Chinese
Warranty Languages English, Canadian French, LA Spanish, Brazilian Portuguese, Danish,
German, Castilian Spanish, French, Italian, Dutch, Norwegian, Finnish,
Swedish, Bahasa Indonesian, Korean, T. Chinese, Simplified Chinese
Color Carbonite black and silver (two-tone)
VESA External
Mounting
Yes (standard 4 hole pattern, 100 mm); base must first be removed
Kensington Lock-
Ready
Yes
Certification and
Compliance
Australian ACA Approval, Canadian Requirements/CSA, CE Marking, China CCIB/CCEE
Approval, CISPR Requirements, Eastern European Approvals, Energy Star Compliant, FCC
Approval, German Ergonomic (TUV and GS Mark), ISO 13406-2 Compliant (Pixel Defect
Guidelines), Mexican NOM Approval, MPR-II Compliant, PC2001 Compliant, PC99 Certified, S.
Korean MIC Approval, Taiwan BSMI Approval, TCO 99 or 03 depending on region (emissions,
ergonomics, environment), TUV-Ergo, UL Listed, VCCI Approvals, Microsoft® Windows®
Certification, Windows Vista™ Certification
QuickSpecs
HP L1740 Flat Panel Monitor
Technical Specifications
DA - 12127 Worldwide QuickSpecs — Version 17 — 5.23.2007 Page 6

Compatibility VESA Video Signal Standard (VSIS) Compliant video cards have been tested and proven
compatible for use with the HP L1740 Flat Panel Monitor. Recommended for use with HP
products.
Service and Warranty Three years parts, labor, and on-site service. 24-hour, 90-day, toll-free technical support.
Replacement options may include second business day on-site service, or next business day
direct replacement, at HP's sole discretion. With direct replacement, HP will ship a replacement
display product directly to you. Using the prepaid shipping labels provided, return your failed
display to HP in the same packaging as the replacement. Certain restrictions and exclusions
apply. For details see your product warranty or contact HP Customer Support.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the U.S. and other countries.
Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other
countries.
The information contained herein is subject to change without notice. The only warranties for HP products and services are
set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed
as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
QuickSpecs
HP L1740 Flat Panel Monitor
Technical Specifications
DA - 12127 Worldwide QuickSpecs — Version 17 — 5.23.2007 Page 7