HP ProLiant ML310 Generation 5p User manual

HP ProLiant ML310 Storage Server
user guide
This guide provides installation, configuration, and administration information for the HP ProLiant ML310 Storage Server
with Microsoft®Windows®Storage Server 2003 R2.
AG620-96001
Part number: AG620-96001
First edition: November 2006

Legal and notice information
© Copyright 2006 Hewlett-Packard Development Company, L.P.
Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and
12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are
licensed to the U.S. Government under vendor’s standard commercial license.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth
in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting
an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Microsoft, Windows, Windows XP, and Windows NT are U.S. registered trademarks of Microsoft Corporation.
UNIX is a registered trademark of The Open Group.

Contents
Aboutthisguide ......................... 11
Intendedaudience..................................... 11
Gettinghelp ....................................... 11
Relateddocumentation................................... 11
Conventions ....................................... 11
Documentconventionsandsymbols ........................... 12
Textsymbols ..................................... 12
HPtechnicalsupport.................................... 12
HPsubscriber'schoice ................................. 13
HP-authorizedreseller ................................. 13
Otherhelpfulwebsites................................. 13
HPhardwaresupportservices.............................. 13
1 Installing and configuringtheserver ................ 15
Setupoverview ...................................... 15
Planningforinstallation................................. 15
Planning a network configuration ............................ 16
Configurationchecklist................................. 16
Installingtheserver .................................... 16
Locatingandwritingdowntheserialnumber........................ 16
Checkingkitcontents.................................. 17
Poweringontheserver................................. 17
Factoryimage..................................... 17
Physical configuration ............................... 17
Defaultbootsequence ............................... 18
AccessingtheHPStorageServerManagementconsole..................... 18
UsingtheDirectattachmethod ............................. 19
UsingtheRemotebrowsermethod ............................ 19
UsingtheRemotedesktopmethod ............................ 22
Loggingoffanddisconnecting.............................. 23
TelnetServer ..................................... 23
EnablingTelnetServer ............................... 23
UsingtheIntegratedLights-Out2method ......................... 23
Configuringtheserveronthenetwork ............................ 25
Beforeyoubegin ................................... 25
RunningtheRapidStartupWizard............................ 26
Completing system configuration............................... 26
2Storagemanagementoverview .................. 29
Storagemanagementelements ............................... 29
Storagemanagementexample.............................. 29
Physicalstorageelements................................ 30
Arrays...................................... 31
Faulttolerance .................................. 31
OnlineSpares................................... 32
Logicalstorageelements ................................ 32
Logicaldrives(LUNs)................................ 32
Partitions..................................... 33
Volumes ..................................... 33
Filesystemelements .................................. 34
HP ProLiant ML310 Storage Server 3

Filesharingelements.................................. 34
VolumeShadowCopyServiceoverview.......................... 34
Usingstorageelements................................. 34
Clusteredserverelements................................ 34
Networkadapterteaming.................................. 35
3Fileservermanagement ..................... 37
New or improved fileservicesfeaturesinWindowsStorageServer2003R2............ 37
StorageManagerforSANs............................... 37
SingleInstanceStorage................................. 37
Searchenhancements ................................. 37
FileServerResourceManager.............................. 37
WindowsSharePointServices.............................. 38
HPStorageServerManagementConsole......................... 38
Fileservicesmanagement.................................. 38
Configurable and pre-configuredstorage ......................... 38
Storagemanagementutilities .............................. 39
Arraymanagementutilities ............................. 39
Array ConfigurationUtility ............................. 40
DiskManagementutility .............................. 40
Guidelinesformanagingdisksandvolumes........................ 41
Whenmanagingdisksandvolumes:......................... 41
Schedulingdefragmentation............................... 41
Diskquotas...................................... 42
Addingstorage.................................... 42
Expandingstorage................................. 43
ExtendingstorageusingWindowsStorageUtilities................... 43
ExpandingstorageforEVAarraysusingCommandViewEVA .............. 44
Expanding storage using the Array ConfigurationUtility................. 44
Volumeshadowcopies................................... 44
Shadowcopyplanning................................. 45
Identifyingthevolume ............................... 45
Allocatingdiskspace ............................... 45
Identifyingthestoragearea............................. 46
Determining creation frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Shadowcopiesanddrivedefragmentation ........................ 46
Mounteddrives .................................... 47
Managingshadowcopies ............................... 47
The shadow copy cache file............................. 48
Enablingandcreatingshadowcopies ........................ 49
Viewingalistofshadowcopies ........................... 50
Setschedules................................... 50
Viewingshadowcopyproperties........................... 50
Redirectingshadowcopiestoanalternatevolume ................... 50
Disablingshadowcopies.............................. 51
Managingshadowcopiesfromthestorageserverdesktop.................. 51
ShadowCopiesforSharedFolders............................ 52
SMBshadowcopies................................ 52
NFSshadowcopies ................................ 53
Recovery of filesorfolders ............................. 54
Recovering a deleted fileorfolder .......................... 54
Recovering an overwritten or corrupted file ...................... 55
Recoveringafolder ................................ 55
Backupandshadowcopies............................. 55
ShadowCopyTransport ................................ 56
Folderandsharemanagement................................ 56
Foldermanagement .................................. 57
Sharemanagement .................................. 63
Shareconsiderations................................ 63
4

DefiningAccessControlLists ............................ 64
Integrating local filesystemsecurityintoWindowsdomainenvironments.......... 64
Comparingadministrative(hidden)andstandardshares................. 64
Managingshares ................................. 64
FileServerResourceManager................................ 65
Quotamanagement .................................. 65
Filescreeningmanagement............................... 65
Storagereports .................................... 65
OtherWindowsdiskanddatamanagementtools ....................... 66
Additional information and references for fileservices...................... 66
Backup........................................ 66
HPStorageWorksLibraryandTapeTools ......................... 66
Antivirus ....................................... 66
Security ....................................... 66
Moreinformation ................................... 66
4Printservices.......................... 69
MicrosoftPrintManagementConsole............................. 69
NeworimprovedHPprintserverfeatures........................... 69
HPWebJetadmin................................... 69
HPInstallNetworkPrinterWizard ............................ 69
HPDownloadManagerforJetdirectPrintDevices...................... 69
MicrosoftPrintMigratorUtility.............................. 69
Networkprinterdrivers................................. 69
Printservicesmanagement ................................. 70
MicrosoftPrintManagementConsole........................... 70
HPWebJetadmininstallation .............................. 70
Web-basedprintermanagementandInternetprinting.................... 70
Planningconsiderationsforprintservices ......................... 70
Printqueuecreation .................................. 71
Sustainingprintadministrationtasks ............................. 71
Driverupdates .................................... 72
Printdrivers.................................... 72
User-modevs.kernel-modedrivers.......................... 72
Kernel-modedriverinstallationblockedbydefault.................... 72
HP Jetdirect firmware................................ 72
Printerserverscalabilityandsizing............................ 72
Backup........................................ 72
Bestpractices....................................... 73
Troubleshooting...................................... 73
Additionalreferencesforprintservices ............................ 73
5MicrosoftServicesforNetworkFileSystem(MSNFS) ......... 75
MSNFSFeatures...................................... 75
UNIXIdentityManagement............................... 75
MSNFSusescenarios ................................... 76
MSNFScomponents .................................. 76
AdministeringMSNFS ............................... 77
ServerforNFS .................................. 77
UserNameMapping ............................... 81
MicrosoftServicesforNFStroubleshooting....................... 83
MicrosoftServicesforNFScommand-linetools..................... 83
OptimizingServerforNFSperformance........................ 83
PrintservicesforUNIX ............................... 83
6Othernetworkfileandprintservices................ 85
FileandPrintServicesforNetWare(FPNW).......................... 85
InstallingServicesforNetWare ............................. 85
HP ProLiant ML310 Storage Server 5

ManagingFileandPrintServicesforNetWare....................... 86
CreatingandmanagingNetWareusers.......................... 87
AddinglocalNetWareusers ............................ 87
EnablinglocalNetWareuseraccounts ........................ 88
ManagingNCPvolumes(shares) ............................ 89
CreatinganewNCPshare............................. 89
ModifyingNCPshareproperties........................... 90
PrintServicesforNetWare ............................... 90
PointandPrintfromNovelltoWindowsServer2003.................. 90
Additionalresources................................ 90
AppleTalk and fileservicesforMacintosh ........................... 91
InstallingtheAppleTalkprotocol............................. 91
InstallingFileServicesforMacintosh ........................... 91
CompletingsetupofAppleTalkprotocolandshares..................... 91
PrintservicesforMacintosh ............................... 92
InstallingPrintServicesforMacintosh........................... 92
PointandPrintfromMacintoshtoWindowsServer2003 .................. 92
7Troubleshooting,servicing,andmaintenance ............ 93
Troubleshootingthestorageserver.............................. 93
Maintenanceandservice.................................. 93
Maintenanceandservicedocumentation ......................... 94
Maintenance updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
System updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Customerselfrepair .................................. 94
Firmware updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
CertificateofAuthenticity.................................. 95
8Systeminstallationandrecovery.................. 97
TheInstallationandRecoveryDVD.............................. 97
Torestoreafactoryimage ................................. 97
SystemswithaDON'TERASEpartition............................ 97
Managingdisksafterarestoration.............................. 97
A Server components ....................... 99
ML310hardwarecomponents................................ 99
BConfiguringstorageserverforWebaccess(optional)......... 103
SettingupanInternetconnection............................... 103
CRegulatorycomplianceandsafety................. 105
Federal Communications Commission notice . . . . . . . . . . . . . . . . . . . . . . . . . . 105
ClassAequipment................................... 105
ClassBequipment................................... 105
Declaration of conformity for products marked with the FCC logo, United States only . . . . . . . 105
Modifications..................................... 106
Cables........................................ 106
Lasercompliance ..................................... 106
Internationalnoticesandstatements ............................. 107
Canadiannotice(AvisCanadien) ............................ 107
ClassAequipment................................. 107
ClassBequipment................................. 107
EuropeanUnionnotice................................. 107
BSMInotice...................................... 107
Japanesenotice.................................... 108
KoreannoticeA&B................................... 108
ClassAequipment................................. 108
6

ClassBequipment................................. 108
Safety .......................................... 108
Batteryreplacementnotice ............................... 108
Taiwanbatteryrecyclingnotice ............................. 109
Powercords...................................... 109
Japanesepowercordnotice............................... 109
Electrostaticdischarge ................................. 109
Preventingelectrostaticdischarge .......................... 109
Groundingmethods ................................ 109
Waste Electrical and Electronic Equipment (WEEE) directive . . . . . . . . . . . . . . . . . . . 110
Czechoslovakiannotice................................. 110
Danishnotice..................................... 110
Dutchnotice ..................................... 110
Englishnotice..................................... 111
Estoniannotice .................................... 111
Finnishnotice..................................... 111
Frenchnotice ..................................... 111
Germannotice .................................... 112
Greeknotice ..................................... 112
Hungariannotice ................................... 112
Italiannotice ..................................... 112
Latviannotice..................................... 113
Lithuaniannotice ................................... 113
Polishnotice ..................................... 113
Portuguesenotice ................................... 113
Slovakiannotice.................................... 114
Sloveniannotice.................................... 114
Spanishnotice .................................... 114
Swedishnotice .................................... 114
................................. 117
HP ProLiant ML310 Storage Server 7

Figures
1..ML310hardwareRAID ............................. 18
2..Internetoptionsscreen.............................. 20
3..HPStorageServerManagementconsole...................... 22
4..Storagemanagementprocessexample ...................... 30
5..Configuringarraysfromphysicaldrives ...................... 31
6..RAID0(datastriping)(S1-S4)ofdatablocks(B1-B12)................ 31
7..Two arrays (A1, A2) and five logical drives (L1 through L5) spread over five physical drives 33
8..SystemadministratorviewofShadowCopiesforSharedFolders............ 48
9..Shadowcopiesstoredonasourcevolume..................... 48
10 ..Shadowcopiesstoredonaseparatevolume.................... 49
11 ..AccessingshadowcopiesfromMyComputer.................... 52
12 ..ClientGUI................................... 53
13 ..Recovering a deleted fileorfolder ........................ 55
14 ..Propertiesdialogbox,Securitytab ........................ 58
15 ..AdvancedSecuritysettingsdialogbox,Permissionstab ............... 59
16 ..UserorgroupPermissionEntrydialogbox..................... 60
17 ..AdvancedSecuritySettingsdialogbox,Auditingtab ................ 61
18 ..SelectUserorGroupdialogbox ......................... 61
19 ..AuditingEntrydialogboxforfoldernameNTFSTest................. 62
20 ..AdvancedSecuritySettingsdialogbox,Ownertab ................. 63
21 ..AccessingMSNFSfromHPStorageServerManagementconsole ........... 77
22 ..FileandPrintServicesforNetWaredialogbox................... 87
23 ..NewUserdialogbox.............................. 88
24 ..NetWareServicestab.............................. 89
25 ..Frontpanel .................................. 100
26 ..Rearpanel .................................. 101
27 ..Automatic configurationsettings ......................... 103
28 ..Proxyserversettings .............................. 103
8

Tables
1..Documentconventions.............................. 12
2..Networkaccessmethods ............................ 15
3..InstallationandConfigurationchecklist ...................... 16
4..Server configurationworksheet.......................... 25
5..SummaryofRAIDmethods............................ 32
6..Tasksandutilitiesneededforstorageserverconfiguration .............. 39
7..Authenticationtable............................... 78
8..MSNFScommand-lineadministrationtools..................... 83
9..Frontpanelcomponents............................. 101
10 ..Rearpanelcomponents............................. 101
HP ProLiant ML310 Storage Server 9

10

About this guide
This guide provides information for setting up, configuring, and administering the HP ProLiant ML310
Storage Server.
This guide is available on the HP web site and is also provided as a PDF document on the HP ProLiant
Storage Server documentation CD.
Intended audience
This book is intended for use by technical professionals who are experienced with the following:
•Microsoft®administrative procedures
•System and storage configurations
Getting help
If you still have a question after reading this guide, contact an HP authorized service provider or access
our web site: http://www.hp.com.
NOTE:
Known issues and work arounds for the storage server products and the service release are addressed
in release notes. To view the latest version, visit http://www.hp.com/go/support.SelectSee support
and troubleshooting information and enter a product name/number. Under self-help resources, select
manuals (guides, supplements, addendums, etc.).
Related documentation
In addition to this guide, refer to the following document for more information:
•HP Integrated Lights-Out 2 User Guide
This document is available on the Documentation CD or it can be obtained at http://www.hp.com/go/
storageservers. Select your product, then click Technical documentation under the Support section.
For product specifications, see the HP Network Attached Storage (NAS) Web site at
http://h18006.www1.hp.com/storage/nas.html.
Conventions
This document contains the following conventions and symbols:
• Document conventions
•Textsymbols
HP ProLiant ML310 Storage Server 11

Document conventions and symbols
Table 1 Document conventions
Convention Element
Blue text Cross-reference links and e-mail addresses
Medium blue, underlined text
(http://www.hp.com)Web site addresses
Bold font •Key names
•Text typed into a GUI element, such as into a box
•GUI elements that are clicked or selected, such as menu and list
items, buttons, and check boxes
Italic font Text emphasis
Monospace font •File and directory names
•System output
•Code
•Text typed at the command line
Monospace, italic font •Code variables
•Command-line variables
Monospace, bold font Emphasis of file and directory names, system output, code, and text
typed at the command line
Text symbols
WARNING!
Indicates that failure to follow directions could result in bodily harm or death.
CAUTION:
Indicates that failure to follow directions could result in damage to equipment or data.
IMPORTANT:
Provides clarifying information or specific instructions.
NOTE:
Provides additional information.
TIP:
Provides helpful hints and shortcuts.
HP technical support
Telephone numbers for worldwide technical support are listed on the HP support web site:
http://www.hp.com/support/.
12 About this guide

Collect the following information before calling:
•Technical support registration number (if applicable)
•Product serial numbers
•Product model names and numbers
•Applicable error messages
•Operating system type and revision level
•Detailed, specificquestions
For continuous quality improvement, calls may be recorded or monitored.
HP subscriber's choice
HP strongly recommends that customers sign up online using the Subscriber's choice web site:
http://www.hp.com/go/e-updates.
•Subscribing to this service provides you with e-mail updates on the latest product enhancements,
newest versions of drivers, and firmware documentation updates, as well as instant access to
numerous other product resources.
•After signing up, you can quickly locate your products by selecting Business support, and then
Storage under Product Category.
HP-authorized reseller
For the name of your nearest HP-authorized reseller:
•In the United States, call 1-800-282-6672.
•Elsewhere, visit the HP web site: http://www.hp.com.Then,clickContact HP to find locations
and telephone numbers.
Other helpful web sites
For other product information, see the following HP web sites:
•h
ttp://www.hp.com/go/storage
•http://www.hp.com/support/
•http://www.docs.hp.com
•http://www.microsoft.com
HP hardware support services
HP Instant Support Enterprise Edition (ISEE) provides proactive remote monitoring, diagnostics,
and troubleshooting to help you enhance the availability of your servers, as well as
storage and network devices. The ISEE software is located on the storage server in the
c:\hpnas\components\ISEE folder. For more information, go to the HP web site:
http://h20219.www2.hp.com/services/cache/10707-0-0-225-121.aspx.
HP Services provides service tools that notify you when a significant system event has or will occur. These
tools, WEBES System Event Analyzer (SEA) and OSEM, are used both as part of the ISEE remote service
offering and as standalone tools to HP service customers. They are designed to send a notification
only when an event or series of events has occurred that require service action. They are not intended
to be real-time system state monitors that trigger with every event. Most system components have the
capability of sending hundreds of state events during normal operation. SEA and OSEM are designed
to filter these component events and only notify customers and/or HP Services when action needs to
be taken to resolve or prevent an outage. As designed they will not report all events. Other utilities
are available to monitor real time system state. The software is located on the storage server in the
c:\hpnas\components\ISEE\OSEM and c:\hpnas\components\ISEE\WEBES folders.
HP ProLiant ML310 Storage Server 13

14 About this guide

1 Installing and configuring the
server
Setup overview
Your HP ProLiant storage server comes pre-installed with the Windows®Storage Server™2003 R2
operating system. Windows Storage Server 2003 R2 extends the Windows Storage Server 2003
operating system, providing a more efficient way to manage and control access to local and remote
resources. In addition, Windows Storage Server 2003 R2 provides a scalable, security-enhanced Web
platform for simplified branch server management, improved identity and access management, and
more efficient storage management.
Planning for installation
Before you install your HP ProLiant storage server, you need to make a few up-front decisions.
Determining a network access method
Before beginning setup and startup procedures, you should decide upon an access method to connect to
the storage server. The type of network access you select is determined by whether or not the network
has a Dynamic Host Configuration Protocol (DHCP) server. If the network has a DHCP server, you
can access the storage server through the direct attachment, remote browser, remote desktop, or iLO
2 methods. If your network does not have a DHCP server, you must access the storage server through
the direct attachment method.
NOTE:
The direct attachment method requires a display, keyboard, and mouse.
Table 2 Network access methods
Access method I.E. 5.5
or later
required?
Storage server
desktop accessible? HP ProLiant Rapid
Startup Wizard access Notes
Direct attachment No Yes Directly from the
storage server desktop. Requires a
monitor, mouse,
and keyboard.
Remote browser Yes No Directly from the HP
ProLiant Storage Server
Management console.
Does not display
the storage server
desktop.
Remote desktop No Yes Indirectly from the
storage server desktop. Windows remote
desktop capability
required on client.
HP Integrated
Lights-Out 2 (iLO
2) connectivity
Yes Yes Indirectly from the
storage server desktop. See the HP
Integrated
Lights-Out 2 User
Guide for server
access instructions.
HP ProLiant ML310 Storage Server 15

Planning a network configuration
You use the Rapid Startup Wizard to configure your storage server. This wizard is displayed automatically
when you first start your system. Before you run the Rapid Startup Wizard, it is helpful to gather together
the network configuration information you need, including:
•User name and administrator password (the system provides you with defaults you need to change)
•E-mail addresses to set up system alerts
•SNMP settings
•Local area network (LAN) configuration settings
To help you gather this information, see "Configuring the server on the network" on page 25.
Configuration checklist
Use the following checklist to make sure you have completed all configuration tasks for your HP ProLiant
storage server. The steps for each task are explained in more detail in subsequent chapters of this guide.
Table 3 Installation and Configuration checklist
Steps Reference
1. Unpack server, check kit contents,
and become familiar with front and
back panels of storage server. Locate
and write down serial number of storage
server.
See "Checking kit contents"onpage17.
2. If you plan to rack the server,
complete the rail installation instructions. See the HP ProLiant rail installation instructions and
tower-to-rack conversion instructions, if applicable.
3. Connect cables; (optional) connect a
keyboard, mouse, and monitor; power
on server, and log in to the server.
See Powering on the server and Direct attach method.
4. Access the HP Storage Server
Management console. See "Accessing the HP Storage Server Management console"onpage18.
5. Complete the storage server
configuration worksheet. See "Server configuration worksheet"onpage25.
6. Run Rapid Startup Wizard. See "Rapid Startup Wizard"onpage26.
7. Co m plete system configuration. See "Completing system configuration"onpage26.
8. Configure storage server for Web
access, if necessary. See "Configuring storage server for Web access
(optional)" on page 103.
Installing the server
To install your HP ProLiant storage server, follow the instructions in the sections below:
• Locating and writing down the serial number
• Checking kit contents
• Powering on the server
Locating and writing down the serial number
Before completing the installation portion of this guide, locate and write down the storage server's
serial number, which may be needed to access the HP Storage Server Management console later on
during the set up process.
16 Installing and configuring the server

The HP ProLiant storage server's serial number is located in three places:
•Top of the storage server
•Back of the storage server
•Inside the storage server shipping box
Checking kit contents
Remove the contents, making sure you have all the components listed below. If components are missing,
contact HP technical support.
1HP ProLiant Storage Server (with
operating system preloaded) 5End User License Agreement
2Power cord(s)6Certificate of Authenticity Card
3Product Documentation and Safety and
Disposal Documentation CD 7ProLiant Essentials Integrated Lights-Out 2
Advanced Pack
4HP ProLiant Storage Server Installation
and System Recovery DVD
Powering on the server
Power on the server after connecting the cables. For more information on your storage server model's
hardware components, see "Server components" on page 99.
1. Power on server by pushing the power button. The power LED illuminates green.
2. When the server powers on, an installation progress screen is displayed. The installation process
takes approximately 10 to 15 minutes to complete and the server will reboot twice. No user
interaction is required.
CAUTION:
Do not interrupt the installation process; when the installation sequence is complete, the
system prompt appears.
3. Go to "Accessing the HP Storage Server Management console" on page 18 to set up server access.
Factory image
HP ProLiant Storage Servers are preconfigured with default storage settings and preinstalled with the
Windows Storage Server 2003 R2 operating system (OS). This section provides additional details
about the preconfigured storage.
Physical configuration
The logical drives reside on all four physical disks as shown in Figure 1.TheDON'TERASEvolume
contains an image that is deployed onto the OS partition during system installation.
HP ProLiant ML310 Storage Server 17

Physical
Drive
0
5083
Logical Disk 3
Data Volume
RAID 5
Logical Disk 2
DON’T ERASE Volume
RAID 5
Logical Disk 1
Operating System Volume
RAID 5
Physical
Drive
1
Physical
Drive
2
Physical
Drive
3
Figure 1 ML310 hardware RAID
NOTE:
In the HP Array Configuration Utility (ACU), logical drives are labeled 1 and 2. In Microsoft Disk
Manager, logical drives are displayed as 0 and 1. For HP Smart Array configuration information, see
http://h18004.www1.hp.com/products/servers/proliantstorage/arraycontrollers/.
The DON’T ERASE logical disk supports the recovery process only and does not host a secondary
operating system. If the operating system has a failure that might result from corrupt system files, a corrupt
registry, or the system hangs during boot, refer to "System installation and recovery" on page 97.
Data volumes are not carved at the factory or by the System Installation and Recovery DVD, and must
be configured manually by the end user. Be sure to back up your user data, and then use the System
Installation and Recovery DVD to restore the server to the factory default state as soon as conveniently
possible.
Default boot sequence
The BIOS supports the following default boot sequence:
1. DVD-ROM
2. HDD
3. PXE (network boot)
Under normal circumstances, the storage servers boot up from the OS logical drive.
•If the system experiences a drive failure, the drive displays an amber disk failure LED.
•If a single drive failure occurs, it is transparent to the OS.
Accessing the HP Storage Server Management console
Before accessing the HP Storage Server Management console, verify that the storage server is completely
installed in the rack, and that all cables and cords are connected.
To access the HP Storage Server Management console, you can use these access methods:
18 Installing and configuring the server

Direct attach To connect directly to the storage server without using the network.
Remote browser To establish a browser-based connection to the HP ProLiant Storage
Server Management console from a remote client running Internet
Explorer 5.5 (or later).
Remote desktop To establish a connection from a remote client without using a browser.
This method requires the client to have Windows remote desktop
capability.
HP Integrated
Lights-Out 2 (iLO 2) To establish a browser-based connection from a remote client using
the iLO 2 interface.
For more information, see "Planning for installation" on page 15.
IMPORTANT:
An IP address can be substituted for a storage server's serial number and hyphen when using either
remote browser or remote desktop methods to access the HP Storage Server Management console. For
example: 192.0.0.1 can be substituted for TWT08466-.
Using the Direct attach method
You can access the HP Storage Server Management console using a monitor, mouse, and keyboard
directly attached to the storage server.
To connect the storage server to a network using the direct attach method
1. Log in to the HP ProLiant Storage Server with the default user name administrator and the
password hpinvent.
The HP ProLiant Storage Server Management console and Rapid Startup Wizard will start
automatically.
NOTE:
You can change the administrator name and password when you configure the server
using the "Rapid Startup Wizard"onpage26.
2. To complete network configuration using the Rapid Startup Wizard, see "Configuring the server on
the network"onpage25.
Using theRemotebrowsermethod
The storage server ships with DHCP enabled on the network port. If the server is placed on a
DHCP-enabled network and the serial number of the device is known, the server can be accessed through
aclien
t running Internet Explorer 5.5 (or later) on that network, using the TCP/IP 3202 port.
IMPORTANT:
Before you begin this procedure, ensure that you have the following:
•Windows-based PC loaded with Internet Explorer 5.5 (or later) on the same local network as the
storage server
•DHCP-enabled network
•Serial number or IP address of the storage server
HP ProLiant ML310 Storage Server 19

To connect the server to a network using the remote browser method, you must first ensure that the client
is configured to download signed ActiveX controls.
To enable ActiveX controls
1. On the remote client machine, open the Internet Explorer web browser and select Tools > Internet
Options > Security.
Figure 2 Internet options screen
2. On the Security screen, select Internet or Local intranet web content zone, then click Custom Level.
3. Scroll down to locate the ActiveX Controls and plug-ins settings.
4. At Download signed ActiveX controls settings, select Enable to enable ActiveX or Prompt to launch a
notice requiring approval before ActiveX is enabled.
5. Click OK to close the Security Settings dialog box.
6. If prompted Are you sure you want to change the security settings for this zone click YES.
7. On theInternet Options dialog box, click OK to finish.
To connect the storage server to a network using the remote browser method
1. On the remote client machine open Internet Explorer and enter https:// and the serial
number of the storage server followed by a hyphen (-), and then:3202.Forexample,
https://D4059ABC3433-:3202 Press Enter.
20 Installing and configuring the server