HP L1000 - 9000 - 0 MB RAM User manual

rp5400 Series of Servers Carrier Grade
Addendum
Third Edition
Customer Order Number: Z7535-90001
Manufacturing Part Number: Z7535-96003
E1112
© Copyright 2001 © Hewlett-Packard Company, All rights reserved.

2

3
Preface

4
Legal Notices
The information contained in this document is subject to change without notice.
HEWLETT-PACKARD MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THE MATERIAL,
INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained herein
or for incidental or consequential damages in connection with the furnishing, performance, or use of this
material.
Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is not
furnished by Hewlett-Packard. This document contains proprietary information which is protected by
copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated to
another language without the prior written consent of Hewlett-Packard Company.
Copyright Notices. Copyright © 2000-2001 by HEWLETT-PACKARD COMPANY

5
Printing History
The Printing History below identifies the edition dates of this manual. Periodic updates are made to this
publication. THe updates may include replacement pages, to be merged into the manual, including an
updated copy of this printing history. Updates may include instructions for pen-and-ink write in corrections.
Updates may be in the form of a complete replacement of the publication.
Each reprinting (Edition) of this publication will incorporate all updates since the last edition. Thus, the
reprinted edition will be identical in content with prior editions of the same publication but with all
interceding updates included. New editions of this manual will contain new information, as well as all
updates.
First Edition - August 2000
Second Edition - January 2001
Third Edition - November 2001

6
About This Manual
This addendum contains information and procedures required to install NEBS-compatible DC rp5400 Series
of Servers Carrier Grade Systems. The rp5400 Series of Servers Carrier Grade Addendum supplements the
documentation for the rp5400 Series of Servers. This addendum contains information not found in the rp5400
Series of Servers documentation including:
• Racking the DC rp5400 Series of Servers
• Electrical Requirements for the DC rp5400 Series of Servers
• Connecting DC power to the server
• Removal and replacement of DC power supplies
• Removal and replacement of the diffuser
• Regulatory Information

7
Other Required Documentation
To install the DC rp5400 Series of Servers, refer to both the rp5400 Series of Servers documentation and this
addendum. The latest version of these documents can be found at the http://docs.hp.com under the [Systems
Hardware] then [rp5400 Series of Servers] headings.

8
WARNING Electrostatic Discharge (ESD) Precaution
When handling any electronic component or assembly (such as a PCI card or
Memory SIMM), observe all antistatic precautions. An ESD kit (HP P/N A3024-80004)
is available or supplied with this system. The kit contains one wrist strap, one
conductive sheet, and one anti-static foam pad.
•Always wear a grounded wrist strap when working on the equipment or printed
circuit boards.
•Treat all assemblies, components, and interface connections as static-sensitive.
•Avoid working in carpeted areas and keep body movement to a minimum while
removing or installing boards to minimize buildup of static charge.

9
Battery Notice
WARNING This device contains a Lithium battery. This battery is not to be removed or replaced
by the user. If the battery needs to be replaced contact you Hewlett-Packard
authorized service personnel.
Lithium batteries can explode is used improperly. Do not recharge, disassemble, or
dispose of in a fire. Failure to follow this precaution can result in damage to
equipment and injury to personnel.

10