
HPE ProLiant DL360 Generation9 (Gen9)
•Support for > 2.2 TB (using GPT) boot drives
•USB 3.0 Stack
•Embedded UEFI Shell
•Mass Configuration Deployment Tool using RESTful API for iLO 4
•PXE boot support for IPv6 networks
•Boot support for option cards that only support a UEFI option ROM
•Network Stack configurations
NOTE: For UEFI Boot
Mode, boot environment and OS image installations should be configured properly
to support UEFI.
NOTE: UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the
factory for your HPE ProLiant Gen9 Server.
One of the following
depending on model
8 SFF Drive Bay Version and 10 SFF Drive Bay Version:
1.7" (4.32cm) Height x 17.11" (43.47cm) Width x 27.5" (69.85cm) Length
4 LFF Drive Bay Version:
1.7" (4.32cm) Height x 17.11" (43.47cm) Width x 29.5" (74.67cm) Length
NOTE: Dimensions without bezel.
Monitor your servers for ongoing management, service alerting, reporting and remote
management with HPE iLO. Learn more at http://www.hpe.com/info/ilo.
Configure and boot your servers securely with industry standard Unified Extensible
Firmware Interface (UEFI). Learn more at
http://www.hpe.com/servers/uefi
RESTful API for iLO 4 is Redfish 1.0 conformance for simplified server management
such as configuration and maintenance tasks based on modern industry
standards.
Learn more at http://www.hpe.com/info/restfulapi.
Hassle free server and OS provisioning for 1 or few servers with Intelligent Provisioning.
Learn more at http://www.hpe.com/servers/intelligentprovisioning.
The Hewlett Packard Enterprise
embedded remote support, when used with Insight
Online direct connect or HPE Insight Remote Support, allows HPE ProLiant servers to
transmit hardware events directly to Hewlett Packard Enterprise or a Hewlett Packard
Enterprise Authorized Partner for automated phone home support. Learn more
at http://www.hpe.com/info/insightonline/explore.