HP ProLiant ML310e Gen Assembly instructions

EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Servers
Marketing Name / Model
[List multiple models if applicable.]
HP ProLiant ML310e Gen 8 v2
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
System board 1, small board 4, power supply 1
6
Batteries
All types including standard alkaline and lithium coin
or button style batteries Yes, System battery
1
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries No
0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps No
0
Cathode Ray Tubes (CRT)
No
0
Capacitors / condensers (Containing PCB/PCT)
No
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
Depending on Power Supply Model
External electrical cables and cords
Power cord
1
Gas Discharge Lamps
No
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
No
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations. No
0
Components and waste containing asbestos
No
0

EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Components, parts and materials containing
refractory ceramic fibers
No
0
Components, parts and materials containing
radioactive substances
No
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Torx Driver
T-15
Flat head screw driver
Midium
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. System Board Battery - Remove the top cover and locate the battery on the system board.
2. Power Supply- Remove power supply cover. Locate capacitor and remove by prying with flat blade screw driver
3. Dispose of properly
4. .
5.
6.
7.
8.
9.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).

EL-MF877-00 Page 3
Template Revision B
PSG instructions for this template are available at EL-MF877-01
System Battery Location
Attachment 1 –350 watt Power Supply Capacitor Location
Attachment 2–460 watt Power Supply Capacitor Location

EL-MF877-00 Page 4
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Attachment 1
350 watt power supply capacitor location

EL-MF877-00 Page 5
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Attachment 2
460 watt power supply capacitor location

EL-MF877-00 Page 6
Template Revision B
PSG instructions for this template are available at EL-MF877-01