HP ProLiant Moonshot User manual

As a dedicated hosting company are you using large numbers of traditionally architected servers? Are you hitting the wall for power,
cooling and space?
The HP Moonshot System uses an innovative new architecture that results from one simple design tenet: to align purpose-built modules
with the right workload to provide optimal results for your dedicated hosting environment. Traditional servers rely on dedicated
components, including management, networking, storage, power cords and cooling fans in a single chassis. In contrast, the Moonshot
system share these chassis components and are capable of supporting 45 servers per 4.3U chassis.
This gives you the ability to generate greater revenue from a smaller footprint while driving down your operational costs. The HP
ProLiant Moonshot Servers use low-energy processors and direct attached disk drives to provide an ideal solution for dedicated hosting.
Front View: Back View:
1. Chassis Power LED 1. Fans 12. SD card slot
2. System health LED 2. Fan LED 13. HP Moonshot 1500 Chassis
Management Module
3. Chassis UID/LED/button 3. HP Moonshot-6SFP Uplink
Module B
14. Switch module
uplink/downlink activity LEDs
4. Front Panel Display LED, Moonshot server 1-18 4. Chassis management
module release lever
15. Power supply connector
5. Switch Module A Health LED 5. HP Moonshot 1500 Chassis
Management Module UID
LED/button
16. 10Gb SFP connector (x6)
6. Front Panel Display LED, Moonshot server 19-27 6. Serial port 17. Serial connector
7. Switch module B health LED 7. Rack control modular
connection
18. Uplink module UID/LED
button
8. Front Panel Display LED, Moonshot server 28-45 8. USB port 19. Uplink module health LED
9. Front Panel Display release 9. HP Moonshot 1500 Chassis
Management module LED
20. HP Moonshot-6SFP Uplink
Module A
10. iLO2 connector 21. Uplink module release lever
11. iLO1 connector (primary)
QuickSpecs
HP ProLiant Moonshot Server
Overview
DA - 14527 Worldwide — Version 6 — December 9, 2013 Page 1

Standard Features - Server
Processor Intel® Atom™ Processor S1260, 2.0 GHz
Cache Memory 1 MB
Chipset Intel™ Atom™ Processor S1200 Series for Servers
On System Management
Processor
via HP Moonshot 1500 Chassis Management module
Memory Protection Advanced ECC (multi-bit error protection)
Memory Type Unbuffered (UDIMM), ECC @ 1333 MHz
DIMM Slots Available 1 SO-DIMM Slot
Configuration 8GB (1x8GB)
Network Controller Network Controller Broadcom 5720 Dual-port 1Gb Ethernet Controller
Storage Controller Marvell 9125
Storage Device Hard Drive Each cartridge will ship with a SATA HDD or SATA SSD
Maximum Internal
Storage (per Moonshot
Server)
Quick Release SATA 2.5" 1TB 1 x 1TB SATA
500 GB 1 x 500 GB SATA
QuickSpecs
HP ProLiant Moonshot Server
Standard Features
DA - 14527 Worldwide — Version 6 — December 9, 2013 Page 2

Interfaces Network RJ-45 for
Management
Two RJ-45 are located on the HP Moonshot 1500 Chassis Management
Module. One is for the HP Moonshot iLO Chassis Management and one is for
future use
SFP+ connector Six 10GbE SFP+ connectors per HP Moonshot-6SFP Uplink.
NOTE: See the HP Moonshot-6SFP Uplink Module QuickSpecs for Technical
Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/14734_div/
14734_div.html
Health LED 47 front for server/switch health, one per server and switch when access
panel is removed
Power 1 front and one per server and switch when access panel is removed
UID for node 1 front and 1 rear (on management module) and one per server and switch
when access panel is removed
Drive health LED One per server and switch when access panel is removed
Industry Standard
Compliance
ACPI 2.0b Compliant
SMBIOS 2.6.1
PXE Support
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Canonical Ubuntu
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
NOTE: Only 64-bit versions of these operating systems are supported.
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server including how to purchase from
HP, please visit our OS Support Site at: http://www.hp.com/go/ossupport and our driver download page:
http://www.hp.com/go/servers/Moonshot/download
Server Form Factor HP ProLiant Moonshot Servers are constructed to allow for 45 servers to fit vertically and exclusively into
the HP Moonshot 1500 chassis
HP Moonshot-45G Switch Modules - up to two switches install vertically and exclusively into the chassis.
An HP Moonshot-6SFP Uplink Module is required per switch.
NOTE: See the HP Moonshot-45G Switch Module QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14732_div/14732_div.html
NOTE: See the HP Moonshot-6SFP Uplink Module QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14734_div/14734_div.html
Standard Features - HP Moonshot 1500 Chassis
Chassis Form Factor 4.3U
QuickSpecs
HP ProLiant Moonshot Server
Standard Features
DA - 14527 Worldwide — Version 6 — December 9, 2013 Page 3

HP Interconnect modules NOTE: Up to two identical pairs of Switch and Uplink modules are supported in the Moonshot 1500 Chassis.
Dual switch modules are required for network redundancy, regardless of cartridge configuration.
HP Moonshot-45G Switch Module
Switch with 45 1 GbE downlink ports.
Compatible with HP Moonshot-6SFP Uplink Module in the Moonshot 1500 Chassis.
For more information, please visit:
HP Moonshot-45G Switch Module
http://h18000.www1.hp.com/products/quickspecs/14732_div/14732_div.html
HP Moonshot-6SFP Uplink Module
Networking faceplate module with 6 10GbE SFP+ uplink ports.
Compatible with HP Moonshot-45G Switch Module in the Moonshot 1500 Chassis.
For more information, please visit:
HP Moonshot-6SFP Uplink Module
http://h18000.www1.hp.com/products/quickspecs/14734_div/14734_div.html
HP Moonshot 1500
Chassis Management
Module
HP Moonshot 1500 Chassis Management module, complete with support for SL-APM.
The HP Moonshot 1500 Chassis Management module manages the health of the chassis and servers and
includes a command-line interface accessible via SSH to configure the chassis and server settings and
control server power and UID lights, use Virtual Serial Port to servers, and to flash firmware in the chassis.
It also supports IPMI management.
On System Management HP Moonshot iLO Chassis Management Firmware is the gateway for aggregated chassis management on
HP Moonshot. Moonshot iLO CM firmware reduces cost and power by sharing four iLO modules across the
nodes and other system components. As a single point of access to the chassis, Moonshot iLO CM firmware
allows you to configure, update, and operate HP Moonshot via CLI, IPMI, and remote serial console access.
For more information, see the HP Moonshot iLO Chassis Management Firmware User Guide on the HP
Project Moonshot Information Library ( http://www.hp.com/go/moonshot/docs ).
System Fans 5 Dual-Rotor, Hot-Plug Fans, N+1
Power Specifications To review typical system power ratings use the HP Power Advisor which is available via the online tool
located at URL: www.hp.com/go/proliant-energy-efficient or www.hp.com/go/hppoweradvisor .
NOTE: Power Specification and Technical Content for supported power supplies can be found at:
http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
QuickSpecs
HP ProLiant Moonshot Server
Standard Features
DA - 14527 Worldwide — Version 6 — December 9, 2013 Page 4

Common Slot Power
Supply
Each Moonshot Chassis comes with a minimum of two (2) HP Common slot power supplies.
HP's Common Slot (CS) power supplies allow for commonality of power supplies across a wide range of
ProLiant and Integrity servers, as well as HP Storage solutions, and are designed to provide the highest
power supply efficiency without degrading system performance. HP CS power supplies are tested by the
Electric Power Research Institute (EPRI) and certified through the ECOS 80 Plus power supply program. HP
CS power supply options provide efficiency ratings of up to 94% and are available in only a 1200W
configuration for this platform which is "right-sized" for this specific solution. All HP Common Slot power
sources are UL, CE Mark Compliant, hot-plug and support redundant configurations. HP Power Advisor can
be accessed at:
www.hp.com/go/hppoweradvisor .
NOTE: Mixing of power supplies in the same server is not supported. All power supplies must be of the
same output and efficiency rating. If non-matched power supplies are inserted you will get errors and
operation will fail.
NOTE: Redundant Power: Optional redundant power supplies can be purchased through power supply
option kits (see Power Supplies for part numbers).
QuickSpecs
HP ProLiant Moonshot Server
Standard Features
DA - 14527 Worldwide — Version 6 — December 9, 2013 Page 5

HP Insight management HP Insight Control HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to deploy,
migrate, monitor, remote control, and optimize your IT infrastructure through
a single, simple management console. For more information, see
http://www.hp.com/go/insightcontrol .
HP Insight Control includes one year of 24 x 7 HP Software Technical Support
and Update Service ensuring rapid access to HP support staff and proactive
delivery of software updates. For more information about this service, see:
http://www.hp.com/services/insight
High Performance
Clusters
HP Insight Cluster
Management Utility
HP Insight Cluster Management Utility (CMU) is an HP-licensed and HP-
supported suite of tools that are used for lifecycle management of hyperscale
clusters of Linux ProLiant systems. CMU includes software for the centralized
provisioning, management and monitoring of nodes. CMU makes the
administration of clusters user friendly, efficient, and effective.
http://www.hp.com/go/cmu
Factory Express Portfolio
for Servers and Storage
HP Factory Express offers configuration, customization, integration and deployment services for HP
servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific server model please contact your sales
representative or go to: http://www.hp.com/go/factory-express .
QuickSpecs
HP ProLiant Moonshot Server
Optional Features
DA - 14527 Worldwide — Version 6 — December 9, 2013 Page 6

Services and Support HP Technology Services for Moonshot
Capitalizing on the Moonshot 1500 System requires a service partner who understands your increasingly
complex business technology environment. That's why it makes sense to team up with the people who
know HP infrastructure hardware and software best - the experienced professionals at HP Technology
Services.
HP is pleased to include full software support for Ubuntu Linux as part of your Moonshot chassis purchase.
For chassis supporting revenue-generating or production level workloads, consider purchasing a level of
support that matches your requirements.
Protect your business beyond warranty with HP Care Pack Services
HP sells support in easy-to-buy, preconfigured packages with the combination of services, coverage and
duration to fit your needs and budget. With Moonshot, we are introducing a new, simpler set of services.
Simply choose the service level that best fits the criticality of your hardware.
HP Foundation Care
HP introduces new Foundation Care services offer scalable reactive support-packages for HP Moonshot
and software. You can choose the type and level of service that is most suitable for your IT and business
needs. The Moonshot 1500 Care Pack services cover the Moonshot 1500 Chassis and the Moonshot servers
with one single Care Pack SKU. Entitlement of support requires the customer to provide the 1500 chassis
serial number. All HP components structured to the Moonshot System are covered by Care Pack services
inclusive of switches, power supplies, and fans. HP Foundation Care services include hardware support,
basic software support and collaborative call handling for software questions related to industry leading
operating systems and software. For a complete list of software products covered, refer to:
www.hp.com/services/collaborativesupport.
Full software support, including call management and ownership thru to resolution is available for select
third party software. As stated earlier, support for Ubuntu software is included in the purchase of your
Moonshot chassis.
HP Datacenter Care
HP Datacenter Care offers you a flexible, tailored, relationship-based approach to support the most
demanding data centers handling the demands of hyperscale computing. This is an environment level
service, purchased once to support your Moonshot environment. Other equipment may be included in this
agreement for holistic datacenter coverage. With HP Datacenter Care, you still have the choice of HP
Foundation Care reactive support which you purchase with each chassis.
HP Datacenter Care is flexible enough to deliver exactly what you need in one relationship. All Datacenter
Care support is tailored to your needs, based on our experience with hyperscale customers:
Assigned account team, led by an account support manager (ASM) who knows your business and
your IT environment and is responsible for the quality service delivery and experience.
Enhanced call handling for the best call experience with rapid escalation and incident resolution
through the HP Hyperscale Center of Excellence
Proactive and reactive support, configured to deliver the level of support needed by the different
data center components and meeting both service-level agreement (SLA) and cost targets
Then add on other services that are tailored to your specific needs, including:
HP Self-Service Spares Service answers the question: What do you do when you need parts? We can set it
up so that you get spare parts onsite through our automated self-service spares. You simply go to the part
QuickSpecs
HP ProLiant Moonshot Server
Service and Support
DA - 14527 Worldwide — Version 6 — December 9, 2013 Page 7

of your data center where the parts live, scan them out, scan in the broken one, and you're done. We
maintain your inventory of good spares, so that what you need is ready to go when you need it. And we
provide monthly service excellence reports illustrating onsite inventory performance.
To obtain further information or to order HP Datacenter Care Service as described above, contact a local
HP sales representative. Please see the Additional Options section of this QuickSpecs for additional
information.
HP Moonshot Installation & Startup Service
HP Installation and Startup Service for the Moonshot System provides for the installation of one system
and its associated Moonshot servers and network switches, as well as operating system deployment and
basic configuration of OS network parameters to establish network connectivity
In response to the needs of the majority of HP Moonshot System customers, this fixed-price/fixed
deliverable service targets new hardware installation and software deployments for the 1500
infrastructure. For more advanced installation, configuration, and integration requirements, custom
deployments are available through a customized Statement of Work. . Please see the Additional Options
section of this QuickSpecs for additional information.
For more information on HP Services, contact any of our worldwide sales offices or visit one of the
following websites:
HP support services: www.hp.com/services/alwayson
HP Care Pack services: www.hp.com/services/carepack
Recommended HP Care Pack Services for your HP product
Optimized Care 3-Year HP Foundation Care Call to Repair
This is HP's highest level of reactive support giving you our commitment to have the hardware operational
within six hours of opening the call with us. This service level includes hardware coverage plus software
diagnosis support with collaborative call management for a broad spectrum of third party software
products including O/S and hypervisors.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA4-8877ENW.pdf
Standard Care 3-Year HP Foundation Care 24x7
This service level provides consistent, reliable reactive support with the broadest coverage window which
is recommended when maintenance must be performed outside business hours. Calls may be opened
24x7. Should an onsite visit be needed, our commitment is to respond onsite within four hours. Software
call back commitment is two hours.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-8877ENW.pdf
Basic Care 3- Year HP Foundation Care Next Business Day
This service level provides the most economical support coverage and is designed for non-revenue
impacting systems. Calls may be opened 24x7. Should an onsite visit be needed, our commitment is to
respond onsite the next business day. Software call back commitment is two hours, during regular
business hours.
For more information on HP Care Pack services, contact any of our worldwide sales offices or resellers or
visit our website at: www.hp.com/go/carepack
QuickSpecs
HP ProLiant Moonshot Server
Service and Support
DA - 14527 Worldwide — Version 6 — December 9, 2013 Page 8

Defective Media
Retention (DMR) and
Comprehensive Defective
Material Retention
If your business deals with sensitive or legally protected data, you know that it's not a simple matter to
return a defective hardware component, but keeping it conflicts with the terms and conditions of many
standard warranty agreements. If you don't return the component, you'll be charged for the replacement
part.
HP Foundation Care services are available with defective media retention of failed hard drives and
comprehensive defective material retention of those other data-retentive components, such as memory,
switches, processors and more. This may be purchased as an optional add-on to your HP Foundation Care
service purchase. This service is critical for customers who:
Need to control and secure their classified, proprietary and confidential data.
Are subject to current data privacy regulations.
Want a simpler, more cost-effective solution when choosing not to return a malfunctioning disk
drive or other data retentive component.
For more information on our data privacy services, see: www.hp.com/services/dataprivacy.
HP Support Center HP provides several tools that make it simpler to get help from HP:
HP Support Center is personalized online support portal with access to information, tools and experts to
support HP business products. Submit support cases online, chat with HP experts, access support
resources or collaborate with peers. Learn more: http://www.hp.com/go/hpsc
HP's Support Center Mobile App allows you to resolve issues yourself or quickly connect to an agent for
live support. Now, you can get access to personalize IT support anywhere, anytime.
HP Support Center are available at no additional cost with a HP warranty, HP Care Pack or HP contractual
support agreement.
NOTE: HP Support Center Mobile App is subject to local availability.
Parts and Materials HP will provide HP-supported replacement parts and materials necessary to maintain the
covered hardware product in operating condition, including parts and materials for available
and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the
maximum usage limitations as set forth in the manufacturer's operating manual, product
quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as
part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by HP due to malfunction.
For more information To learn more on HP Moonshot System, please contact your HP sales representative.
QuickSpecs
HP ProLiant Moonshot Server
Service and Support
DA - 14527 Worldwide — Version 6 — December 9, 2013 Page 9

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE: Factory Integrated Models must start with an HP Moonshot 1500 Chassis. Each Moonshot Chassis will be ordered with minimum
configurations as follows:
Forty Five (45) identically configured Moonshot servers per chassis.
NOTE: This means that each of the 45 servers in the chassis will contain an identically sized HDD, whether it be the 500 GB or the 1 TB
SATA
Two (2) 1200W Common Slot Platinum Plus Power Supplies
NOTE: Additional power supply kits may be ordered to achieve N+1 or N+N redundancy.
One (1) HP Moonshot-45G Switch Module
And
One (1) HP Moonshot-6SFP Uplink Module
NOTE: A second Switch and Uplink Module Kit may be ordered to give a redundant network configuration or to enable two separate
networks utilizing different Moonshot servers.
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of
an HP approved configurator. Contact your local sales representative for additional information.
Step 1: Base Configuration (Choose one HP Moonshot 1500 Chassis)
HP Moonshot 1500
Chassis
HP Moonshot 1500 Chassis
NOTE: Must order a total of 45 identically configured Moonshot servers to complete the
chassis.
700350-B21
Step 1A: Configure Moonshot Servers (one of each unless otherwise noted)
HP Moonshot Server HP ProLiant Moonshot Server
NOTE: Must order a total of 45 identically configured Moonshot servers to complete the
chassis.
NOTE: Each Moonshot server comes preconfigured with a single 8 GB SO-DIMM pre-
installed. This is the only memory configuration available on this server.
NOTE: Each Moonshot cartridge is pre-configured with a single Intel® Atom
TM
Processor
S1260 running at 2.0 GHz. This processor is dual-core, hyperthreaded, and contains 1
MB Cache. The S1260 is the only processor option available and represents a balance of
performance and energy efficiency.
700352-B21
HP Hard drives 6G SATA Quick Release SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) Quick Release Midline 1yr Warranty Hard Drive 632080-B21
HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch) Quick Release Midline 1yr Warranty Hard
Drive
632078-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13021_na/13021_na.html
6G SATA Value Endurance Quick Release SFF (2.5-inch) Enterprise Value Solid State
Drives
HP 240GB 6G SATA Value Endurance SFF 2.5-in Quick-release Enterprise Value 3yr Wty
Solid State Drive
718180-B21
3G SATA MLC Quick Release SFF (2.5-inch) Enterprise Mainstream Solid State Drives
QuickSpecs
HP ProLiant Moonshot Server
Configuration Information – Factory Integrated Models
DA - 14527 Worldwide — Version 6 — December 9, 2013 Page 10

HP 200GB 3G SATA MLC SFF (2.5-inch) Quick-release Enterprise Mainstream 3yr Wty
Solid State Drive
636623-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14038_na/14038_na.html
NOTE: The non-hot plug hard drives use a quick release carrier.
Step 2: Choose Required Options (one of each unless otherwise noted)
Power Supplies HP Common Slot Platinum Plus Power Supply Kits
NOTE: 94% efficiency with support for HP Power Discovery Services.
HP 1200W Common Slot Platinum Plus Hot Plug Power Supply Kit 656364-B21
NOTE: Power Specification and Technical Content for supported power supplies can be
found at:
http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
NOTE: Minimum of two and maximum of four power supplies per chassis when
configured with the HP Moonshot Server (PN 700352-B21).
Networking HP Moonshot 45G Switch Module Kit 704644-B21
HP Moonshot 6SFP Uplink Module Kit 704646-B21
NOTE: Must order one of each the Switch Kit and Uplink Kit per chassis.
NOTE: Maximum of two of each the Switch Kit and Uplink Kit per chassis to allow
configurations with redundant or dual networks.
Step 3: Choose additional options
HP Insight Software HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server
FIO License
C6N36A
HP Power Cords HP C13 - Nema 5-15P US/CA 110V 10Amp 1.83m Power Cord AF556A
HP C13 - GB-1002 CN 250V 10Amp 1.83m Power Cord AF557A
HP C13 - IRAM -2073 AR 250V 10A 2.5m Power Cord AF558A
HP C13 - Nema 5-15P TH/PH 250V 10Amp 1.83m Power Cord AF559A
HP C13 - CNS-690 TW 110V 13Amp 1.83m Power Cord AF561A
HP C13 - IS-1293 IN 240V 6Amp LV 2.0m Power Cord AF562A
HP C13 - KSC- 8305 KR 250V 10Amp 1.83m Power Cord AF560A
HP C13 - SI-32 IL 250V 10Amp 1.83m Power Cord AF564A
HP C13 - SEV 1011 CH 250V 10Amp 1.83m Power Cord AF565A
HP C13 - DK-2.5A DK 250V 10Amp 1.83m Power Cord AF566A
HP C13 - SABS-164 ZA 250V 10Amp 2.5m Power Cord AF567A
HP C13 - CEE-VII EU 250V 10Amp 1.83m Power Cord AF568A
HP C13 - AS3112-3 AU 250V 10Amp 2.5m Power Cord AF569A
HP C13 - BS-1363A UK/HK/SG 250V 10Amp 1.83m Power Cord AF570A
HP C13 - CEI-23-50 IT/CL 250V 10Amp 1.83m Power Cord AF571A
HP C13 - JIS C8303 JP 100V 12Amp 2.0m Power Cord AF572A
QuickSpecs
HP ProLiant Moonshot Server
Configuration Information – Factory Integrated Models
DA - 14527 Worldwide — Version 6 — December 9, 2013 Page 11

HP C13 - IS-1293 IN 250V 10Amp HV 2.5m Power Cord SG579A
HP C13 - C14 WW 250V 10Amp Flint Gray 2.0m Jumper Cord AF573A
HP C13 - NBR-14136 BR 250V 10Amp 1.83m Power Cord AF591A
HP C13 - C14 WW 250V 10Amp 2.0m Jumper Cord A0K02A
HP C13 - C14 WW 250V 10A Gray 0.7m Jumper Cord A0K03A
HP C13 - C14 WW 250V 10A Gray 1.37m Jumper Cord A0K04A
HP C13 - C14 WW 250V 10A Gray 3.0m Jumper Cord A0K06A
HP C13 - Nema 6-15P US 250V 15A JP 3.6m Power Cord A0N33A
QuickSpecs
HP ProLiant Moonshot Server
Configuration Information – Factory Integrated Models
DA - 14527 Worldwide — Version 6 — December 9, 2013 Page 12

NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of
an HP approved configurator. Contact your local sales representative for additional information.
HP Insight Software HP Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates Single Server
License
C6N27A
HP Insight Control including 1yr 24x7 Technical Support and Updates Electronic License C6N28ABE
HP Insight Control Server Provisioning Media Kit BD883A
HP Insight Management Media Kit C6N31A
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Electronic
License
C6N36ABE
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple
licenses with a single activation key.
NOTE: Customer will receive a license entitlement certificate. The license entitlement
certificate must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service.
NOTE: Licenses ship without media. The HP Insight Control Media Kit can be ordered
separately, or can be downloaded at: http://www.hp.com/go/insightupdates .
NOTE: For additional license options please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12631_div/12631_div.html
High Performance
Clusters
HP Insight Cluster Management Utility 1yr 24x7 Flexible License D9Y33A
HP Insight Cluster Management Utility 3yr 24x7 Flexible License D9Y34A
HP Insight Cluster Management Utility Media
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html
BD477A
SFP Options HP BLc Virtual Connect 1Gb SX Small Form Factor Pluggable Option Kit 453151-B21
HP BLc Virtual Connect 1Gb RJ-45 Small Form Factor Pluggable Option Kit 453154-B21
SFP+ Options HP BladeSystem c-Class 10Gb Short Range Small Form-Factor Pluggable Option 455883-B21
QuickSpecs
HP ProLiant Moonshot Server
Additional Options
DA - 14527 Worldwide — Version 6 — December 9, 2013 Page 13

Direct Attach Cables HP BladeSystem c-Class Small Form-Factor Pluggable .5m 10GbE Copper Cable 487649-B21
HP BladeSystem c-Class Small Form-Factor Pluggable 1m 10GbE Copper Cable 487652-B21
HP BladeSystem c-Class Small Form-Factor Pluggable 3m 10GbE Copper Cable 487655-B21
HP BladeSystem c-Class Small Form-Factor Pluggable 7m 10GbE Copper Cable 487658-B21
HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable J9281B
HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable J9283B
HP X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable J9285B
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable JG081C
HP C-Series SFP+ to SFP+ Copper 3.0m Direct Attach Cable AP784A
HP C-Series SFP+ to SFP+ Copper 5.0m Direct Attach Cable AP785A
HP B-series SFP+ to SFP+ Active Copper 1.0m Direct Attach Cable AP818A
HP B-series SFP+ to SFP+ Active Copper 3.0m Direct Attach Cable AP819A
HP B-series SFP+ to SFP+ Active Copper 5.0m Direct Attach Cable AP820A
HP BladeSystem c-Class 10Gb Short Range Small Form-Factor Pluggable Option 455883-B21
HP BLc Virtual Connect 1Gb SX Small Form Factor Pluggable Option Kit 453151-B21
HP BLc Virtual Connect 1Gb RJ-45 Small Form Factor Pluggable Option Kit 453154-B21
HP Rail Kits
(Chassis Specific)
HP 4.3U Server Rail Kit 681254-B21
HP 0.66U Spacer Blank Kit 681260-B21
NOTE: For data center airflow management purposes, it is recommended that either
the .66U Spacer Blank or the 13U FIO Rack Adapter Kit can be ordered.
NOTE: The HP 4.3U Rail Kit is required to be ordered for every chassis to properly install
the chassis into a rack.
NOTE: The .66U Spacer Blank kit may be ordered and will give an even 5U (4.3U+0.66U)
spacing in a rack. This would enable installing up to 8 chassis in a 42U rack. It is also
possible to stack up to 9 chassis in a 42U rack using the 13U FIO Rack Adapter Kit. If the
13U kit is used, the .66U spacer would not be used and vice versa.
Rack Adapter HP 13U FIO Rack Adapter Kit for 3X4.3U Chassis
NOTE: Groups Moonshot 1500 Chassis units into a 13U space. Order one per three
enclosures. The 0.66U spacer is not used when selecting this option.
681677-B21
HP Tape Backup NOTE: For the complete range of tape drives, autoloaders, libraries and media see:
http://www.hp.com/go/tape . For hardware and software compatibility of HP tape
backup products see: http://www.hp.com/storage/SPOCK
HP StoreEver LTO-6 Ultrium 6250 Tape Drive in 1U Rack-mount Kit C0L99A
HP StoreEver LTO-6 Ultrium 6650 SAS Internal Tape Drive EH963A
HP StoreEver LTO-6 Ultrium 6650 SAS External Tape Drive EH964A
HP StoreEver LTO-6 Ultrium 6250 Internal Tape Drive EH969A
HP StoreEver LTO-6 Ultrium 6250 External Tape Drive EH970A
QuickSpecs
HP ProLiant Moonshot Server
Additional Options
DA - 14527 Worldwide — Version 6 — December 9, 2013 Page 14

HP Uninterruptible Power
Systems
HP Rack-mountable UPS
HP R1500 G3 Uninterruptible Power Supply (UPS)
HP R1.5kVA G3 1U NA Uninterruptible Power System AF469A
HP R1.5kVA G3 1U JP/TW Uninterruptible Power System AF470A
HP R1.5kVA G3 1U INTL Uninterruptible Power System AF471A
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14059_div/14059_div.html
(Worldwide)
HP R/T3000 G2 Uninterruptible Power System (UPS)
HP R/T3000 G2 2U L530 Low Voltage NA/JP Uninterruptible Power System AF466A
HP R/T3000 G2 2U L620 High Voltage NA/JP Uninterruptible Power System AF467A
HP R/T3000 G2 2U Detachable Cord High Voltage INTL Uninterruptible Power System
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14058_div/14058_div.html
(Worldwide)
AF468A
R5000 Uninterruptible Power System (UPS)
HP R5KVA 3U IEC309-32A High Voltage INTL Uninterruptible Power System AF461A
HP R5KVA 3U L630 High Voltage NA/JP Uninterruptible Power System AF460A
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14109_div/14109_div.html
(Worldwide)
R7000 Uninterruptible Power System (UPS)
HP R7KVA 4U 50A High Voltage NA/JP Uninterruptible Power System AF462A
HP R7KVA 4U IEC-32A High Voltage INTL Uninterruptible Power System AF463A
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14110_div/14110_div.html
(Worldwide)
NOTE: For additional information on HP Uninterruptible Power Systems please go to:
www.hp.com/servers/rackups .
NOTE: For additional information on sizing your server, please reference:
http://www.upssizer.com .
NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and
Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That
link will list cable descriptions, requirements, and specifications for UPS and PDU units.
Please see the following link: www.hp.com/products/powercords .
HP Power Distribution
Units
HP Monitored Power Distribution Unit: Full Rack Version
HP 8.6kVA 24A Single Input Three Phase NA/JP Monitored Power Distribution Unit AF504A
HP 8.3kVA 40A Single Input Single Phase NA/JP Monitored Power Distribution Unit AF506A
HP 11kVA 16A Single Input Three Phase INTL Monitored Power Distribution Unit AF508A
HP 7.3kVA 32A Single Input Single Phase INTL Monitored Power Distribution Unit AF510A
HP Monitored Power Distribution Unit: Half Rack Version
HP 4.9kVA 24A Single Input Single Phase NA/JP Monitored Power Distribution Unit AF914A
QuickSpecs
HP ProLiant Moonshot Server
Additional Options
DA - 14527 Worldwide — Version 6 — December 9, 2013 Page 15

HP 7.3kVA 32A Single Input Single Phase INTL Monitored Power Distribution Unit AF915A
NOTE: Please see the following QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/12118_div/12118_div.html
(Worldwide)
Modular Power Distribution Units 1U/0U (Up to 32 outlets)
NOTE: 1U/0U mounting brackets shipped with the unit (optimized for 10000 and 9000
series racks).
HP 2.8kVA 24A Low Voltage NA/JP Modular Power Distribution Unit 252663-D71
NOTE: This PDU has a detachable input power cord and allows for adaptability to
country specific power requirements.
NOTE: Please see the following QuickSpecs for additional options including shorter
jumper cables and country specific power cords:
http://h18000.www1.hp.com/products/quickspecs/11041_div/11041_div.html
(Worldwide)
NOTE: For additional information on HP Power Distribution Units including accessories
please go to: http://www.hp.com/go/pduwww.hp.com/go/pdu .
NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and
Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That
link will list cable descriptions, requirements, and specifications for UPS and PDU units.
Please see the following link: www.hp.com/products/powercords .
HP Intelligent Power
Distribution Units (iPDU)
iPDU Core Units
HP 4.9kVA 24A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit AF520A
HP 8.6kVA 24A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit AF522A
HP 7.3kVA 32A Single Phase INTL Core Intelligent Modular Power Distribution Unit AF525A
HP 11kVA 16A Three Phase INTL Core Intelligent Modular Power Distribution Unit AF526A
iPDU Extension Bars
HP 5xC13 Intelligent PDU Extension Bar G2 Kit AF547A
HP 5xC13 Outlets Power and UID LEDs Pair Standard Extension Bar AF528A
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13650_div/13650_div.html
(Worldwide)
HP Basic Power
Distribution Units
HP 1.9kVA 120 Volt 12 Outlet NA/JP Basic Power Distribution Unit H5M54A
HP 2.8kVA 120 Volt 18 Outlet NA/JP Basic Power Distribution Unit H5M55A
HP 3.6kVA 200-240 Volt 12 Outlet WW Basic Power Distribution Unit H5M56A
HP 3.6kVA 200-240 Volt 20 Outlet WW Basic Power Distribution Unit H5M57A
HP 4.9kVA 208 Volt 20 Outlet NA/JP Basic Power Distribution Unit H5M58A
HP 4.9kVA 208 Volt 30 Outlet NA/JP Basic Power Distribution Unit H5M59A
HP 8.3kVA 208 Volt 36 Outlet NA/JP Basic Power Distribution Unit H5M60A
HP 8.6kVA 208 Volt Three Phase 18 Outlet NA/JP Basic Power Distribution Unit H5M61A
HP 8.6kVA 208 Volt Three Phase 30 Outlet NA/JP Basic Power Distribution Unit H5M62A
QuickSpecs
HP ProLiant Moonshot Server
Additional Options
DA - 14527 Worldwide — Version 6 — December 9, 2013 Page 16

HP 5.7kVA 208 Volt Three Phase 27 Outlet NA/JP Dual Voltage Basic Power Distribution
Unit
H5M63A
HP 8.6kVA 208 Volt Three Phase 30 Outlet NA/JP Dual Voltage Basic Power Distribution
Unit
H5M64A
HP 11kVA 400 Volt Three Phase 42 Outlet NA Basic Power Distribution Unit H5M67A
HP 7.3kVA 230 Volt 20 Outlet INTL Basic Power Distribution Unit H5M68A
HP 7.3kVA 230 Volt 30 Outlet INTL Basic Power Distribution Unit H5M70A
HP 11kVA 230 Volt 36 Outlet INTL Basic Power Distribution Unit H5M71A
HP 11kVA 400 Volt Three Phase 30 Outlet INTL Basic Power Distribution Unit H5M72A
HP 11kVA 400 Volt Three Phase 42 Outlet INTL Basic Power Distribution Unit H5M73A
HP Hardwired 200-240 Volt 36 Outlet WW Basic Power Distribution Unit H5M75A
HP 13.2kVA 480 Volt Three Phase 15 Outlet NA Basic Power Distribution Unit H3X07A
HP 19.9kVA 480 Volt Three Phase 30 Outlet NA Basic Power Distribution Unit H3X08A
HP 277 Volt options for H3X07A and H3X08A
HP 800VA - 277V Input / 230V Output NA Rack Mount Transformer H3X09A
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14557_div/14557_div.html
(Worldwide)
NOTE: Additional HP Power Distribution Units are available. For a complete list of all HP
PDUs and additional information please visit: www.hp.com/go/rackandpower .
HP Rack Series HP Intelligent Series Rack
HP 636 1200mm Pallet Intelligent Series Rack BW899A
HP 636 1200mm Shock Intelligent Series Rack BW900A
HP 642 1200mm Pallet Intelligent Series Rack BW907A
HP 642 1200mm Shock Intelligent Series Rack BW908A
HP 647 1200mm Pallet Intelligent Series Rack BW913A
HP 647 1200mm Shock Intelligent Series Rack BW914A
NOTE: Rack chosen is required to have 1200mm to provide space for cable
management arm at the rear of the chassis and host PDU in the rear of the rack.
NOTE: Please see the QuickSpecs for Technical Specifications such as height, width,
depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/14223_div/14223_div.html
(Worldwide)
NOTE: For additional information regarding Rack Cabinets, please see the following
URL: http://www.hp.com/go/rackandpower .
HP Rack Options HP TFT7600 G2 KVM Console and Monitor (TFT7600 G2)
HP TFT7600 G2 KVM Console Rackmount Keyboard US Monitor AZ870A
HP TFT7600 G2 KVM Console Rackmount Keyboard UK Monitor AZ871A
HP TFT7600 G2 KVM Console Rackmount Keyboard DE Monitor AZ872A
QuickSpecs
HP ProLiant Moonshot Server
Additional Options
DA - 14527 Worldwide — Version 6 — December 9, 2013 Page 17

HP TFT7600 G2 KVM Console Rackmount Keyboard FR Monitor AZ873A
HP TFT7600 G2 KVM Console Rackmount Keyboard IT Monitor AZ874A
HP TFT7600 G2 KVM Console Rackmount Keyboard ES Monitor AZ875A
HP TFT7600 G2 KVM Console Rackmount Keyboard DK Monitor AZ876A
HP TFT7600 G2 KVM Console Rackmount Keyboard NO Monitor AZ877A
HP TFT7600 G2 KVM Console Rackmount Keyboard SE/FI Monitor AZ878A
HP TFT7600 G2 KVM Console Rackmount Keyboard CH Monitor AZ879A
HP TFT7600 G2 KVM Console Rackmount Keyboard PT Monitor AZ880A
HP TFT7600 G2 KVM Console Rackmount Keyboard BE Monitor AZ881A
HP TFT7600 G2 KVM Console Rackmount Keyboard JP Monitor AZ882A
HP TFT7600 G2 KVM Console Rackmount Keyboard RU Monitor AZ883A
HP TFT7600 G2 KVM Console Rackmount Keyboard Intl Monitor AZ884A
HP TFT7600 G2 KVM Console Rackmount Keyboard US TAA Monitor AZ885A
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13731_div/13731_div.html
(Worldwide)
HP Server Console Switches
HP Server Console 0x2x8 Port Analog Switch AF616A
HP Server Console 0x2x16 Port Analog Switch AF617A
HP TAA 0x2x16xKVM Server Console G2 Switch AF626A
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/11834_div/11834_div.html
(Worldwide)
HP Server Console Switch G2 with Virtual Media & CAC
HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software AF618A
HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software AF619A
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13475_div/13475_div.html
(Worldwide)
HP IP Console Switch G2 with Virtual Media & CAC
HP 1x4 USB/PS2 KVM Console Switch AF611A
HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software AF620A
HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software AF621A
HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software AF622A
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13474_div/13474_div.html
(Worldwide)
QuickSpecs
HP ProLiant Moonshot Server
Additional Options
DA - 14527 Worldwide — Version 6 — December 9, 2013 Page 18

HP Moonshot 1500
Chassis
Dimensions
(H x W x D)
7.47 x 17.45 x 35.34in (18.96 x 44.33 x 89.97cm)
NOTE: Rack chosen is required to have 1200mm to provide space for cable
management arm at the rear of the chassis and host PDU in the rear of the
rack.)
Weight
(approximate)
Maximum
(all hard drives, power
supplies, and processors
installed)
180 lbs.
Network Ports (per switch
& uplink pair)
Forty-five (45) 10/100/1000 downlink ports
Six (6) 10Gb SFP+ uplink ports
NOTE: See the HP Moonshot-45G Switch Module QuickSpecs for Technical
Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/14732_div/
14732_div.html
NOTE: See the HP Moonshot-6SFP Uplink Module QuickSpecs for Technical
Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/14734_div/
14734_div.html
Input Requirements
(per power supply)
Rated Line Voltage 90 to 140 VAC
180 to 264 VAC
Rated Input Current 7.31A at 115VAC
3.6A at 230VAC
Rated Input Frequency 47 to 63 Hz
Rated Input Power 855W (at 100 VAC),
840.72W (at 200 VAC)
Power Specifications To review typical system power ratings use the HP Power Advisor which is
available via the online tool located at URL:
www.hp.com/go/proliant-energy-efficient
Power Supply Output (per
power supply)
Rated Steady-State Power 653.10W (at 100 VAC),
653.08W (at 200 VAC)
System Inlet
Temperature
Operating 50° to 95° F (10° to 35° C) at sea level with an
altitude derating of 1.8°F per every 1000 ft (1.0°C
per every 304.8 m) above sea level to a maximum
of 10,000 ft (3048 m), no direct sustained
sunlight. Maximum rate of change is 18°F/hr
(10°C/hr). The upper limit may be limited by the
type and number of options installed.
System performance may be reduced if operating
with a fan fault or above 86°F (30°C).
Non-operating -22° to 140° F (-30° to 60° C)
Maximum rate of change is 36°F/hr (20°C/hr).
Relative Humidity
(non-condensing)
Operating 10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non-
condensing.
QuickSpecs
HP ProLiant Moonshot Server
Technical Specifications
DA - 14527 Worldwide — Version 6 — December 9, 2013 Page 19

Non-operating 5 to 95% relative humidity (Rh), 38.7°C (101.7°F)
maximum wet bulb temperature, non-
condensing.
Altitude Operating 10,000 ft (3048 m). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 1500
ft/min (457 m/min).
Non-operating 30,000 ft (9144 m). Maximum allowable altitude
change rate is 1500 ft/min (457 m/min).
Acoustic Noise Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23°C ambient environment. Noise emissions were
measured in accordance with ISO 7779 (ECMA 74) and declared in accordance
with ISO 9296 (ECMA 109).
Idle
L WAd 7.1 Bels
L pAm 54 dB
Operating
L WAd 7.3 Bels
L pAm 57 dB
Emissions Classification
(EMC)
FCC Rating Class A
Normative Standards CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15;
ICES-003; CNS13438; K22;K24; EN 61000-3-2; EN
61000-3-3; EN 60950-1; IEC 60950-1
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family of
products is eligible to bear the appropriate compliance logos and statements.
Broadcom 5720 Adapter Network Interface
Compatibility IEEE 1588, IEEE 802.1AS
IEEE 802.3az
Data Transfer Method PCI Express v 2.1, 5.0 GT/s and 2.5 GT/s bus speeds and supports for x1, x2, x4
links widths (Lanes)
Controller
Network Transfer Rate 10Mb(Half-Duplex) 10 Mb/s per port, 20 Mb/s Combined
10Mb (Full-Duplex) 20 Mb/s per port, 40 Mb/S Combined
100Mb (Half-Duplex) 100 Mb/s per port, 200 Mb/s Combined
100Mb(Full-Duplex) 200 Mb/s per port, 400 Mb/s Combined
1Gb(Half and Full-Duplex) 1000Mb/s per port, 2000 Mb/s
Combined
Connector Internal
Cable Support N/A
QuickSpecs
HP ProLiant Moonshot Server
Technical Specifications
DA - 14527 Worldwide — Version 6 — December 9, 2013 Page 20