HP rp7400 Assembly Instructions

1
System Overview
The following sections provide or point to an overview of the rp7400
server hardware and software.
Hardware overview
For anoverviewof the EnterpriseServer Familyhardware -
For an overview of the HP-9000 or HPe3000 rp7400 Server hardware -
Software Overview
The HP-9000 rp7400 server is designed to operate using HP-UX version
11.0 or newer.
The HPe3000 rp7400 server is designed to operate using MPE/iX Release
7.0 (uni-processor support) and MPE/iX Felease 7.0 Express
(mulit-processor support).
Go to docs.hp.com
Go to docs.hp.com

2

3
rp7400 Enterprise Server System Safety and
Regulatory Information
Overview
Regulatory Compliance statements are required by some countries for
international importation of rp7400 Enterprise Servers. The following
information is provided:
Regulatory Information
Electrical Safety
— Electrostatic Discharge (ESD) Precautions
— Battery Notice
Cabinet Safety Precautions
Declaration of Conformity
FCC Statement (USA Only)
Canada RFI Statement
European Union RFI Statement
Korean RFI Statement
Taiwan RFI Statement
Japan Safety and Regulatory Statements
Acoustics (Germany)
Australian C-Tick Label
Laser Safety
Product Information
For detailed information on the rp7400 Enterprise Server product, please
go to the http://docs.hp.com web site (in the Systems Hardware
selection), or the http://eproducts.hp.com web site.

4
Regulatory Information
For your protection, this product has been tested for conformance to
various national and international regulations and standards. The scope
of this regulatory testing includes electrical and mechanical safety,
electromagnetic emissions, immunity, acoustics and hazardous
materials.
When required, approvals are obtained from third party test agencies.
Approval marks appear on the product label. In addition, various
regulatory bodies require some information under the headings listed in
this section.
Electrical Safety
This product has not been evaluated for connection to an “IT” power
system (AC distribution system having no direct connection to earth
according to IEC 950).
Locate the AC outlet near the computer! The AC power cords are this
product's main AC disconnect devices and must be easily accessible at all
times.
Electrostatic Discharge (ESD) Precautions
When handling any electronic component or assembly (such as, a PCI
card or Memory SIMM), you must observe the following antistatic
precautions to prevent damage. An ESD kit (HP P/N A3024-80004) is
available (or supplied with Memory additions). This kit contains one
wrist strap, one conductive sheet, and one anti-static foam pad.
• Always wear a grounded wrist strap when working around the
system, and when handling printed circuit boards.
• Treat all assemblies, components and interface connections as
static-sensitive.
• Avoid working in carpeted areas, and keep body movement to a
minimum while removing or installing boards, to minimize buildup of
static charge.
Battery Notice
This product contains a Lithium battery.
This battery is not to be removed or replaced by the user. If the battery

5
needs to be replaced, contact your Hewlett-Packard authorized service
personnel.
CAUTION Lithium batteries may explode if mistreated.
Do not recharge, disassemble, or dispose of in a fire.
Please properly recycle all used batteries.

6
Cabinet Safety Precautions
WARNING Cabinets are heavy even when empty. Exercise
caution when moving cabinets whether equipment
is installed in the cabinet or not. Avoid rolling
cabinets on rough or uneven surfaces or inclines
greater than 10 degrees. Unloading cabinets from
the pallet and movement of cabinets should be
performed by at least two people.
WARNING Slideable products are not to be extended from the
cabinet while the equipment is on the shipping
pallet. The cabinet must be unloaded from the pallet
and both front and rear anti-tip feet properly
installed prior to extending any slideable product.
WARNING Once installed, both the front and rear anti-tip feet
must remain in place to maintain stability. Only one
slideable product must be extended at a time.
Sicherheitsvorkehrungen für Einbaugehäuse
WARNING Einbaugehäuse haben auch ohne Inhalt ein hohes
Gewicht. Seien Sie also vorsichtig, wenn Sie ein
Gehäuse hin und her bewegen, sei es mit oder ohne
installierten Innenteilen. Rollen Sie das Gehäuse
nach Möglichkeit nicht über rauhe oder unebene
Oberflächen bzw. Oberflächen mit mehr als 10 Grad
Neigung. Das Abladen von der Palette und
Positionieren muß von mindestens zwei Personen
durchgeführt werden.

7
WARNING Ziehen Sie keine beweglichen Teile heraus, solange
sich das Einbaugehäuse auf der Palette befindet.
Laden Sie es zunächst von der Palette ab, und
stellen Sie es mit den kippsicheren Vorder-und
Hinterfüßen ordnungsgemäß auf, um bewegliche
Teile sicher herausziehen zu können.
WARNING Nach deren Installation dürfen die kippsicheren
Füße nicht wieder entfernt werden, um sicheren
Stand zu gewährleisten. Ziehen Sie jeweils nur ein
bewegliches Teil heraus.

8
Consignes de sécurité relatives aux armoires
WARNING Une armoire est lourde même lorsqu’elle est vide.
Faites preuve de prudence lorsque vous en déplacer
une, peu importe si des éléments y sont installés ou
non. Évitez de faire rouler l’armoire sur un sol
irrégulier ou incliné à plus de 10 degrés. Il faut au
moins deux personnes pour décharger une armoire
de la palette d’expédition et la déplacer.
WARNING Ne faites pas glisser les éléments coulissants hors de
l’armoire alors qu’elle se trouve sur la palette
d’expédition. Vous devez d’abord décharger
l’armoire de la palette et installer correctement les
pieds antibasculement, en avant et en arrière, avant
de faire glisser les éléments coulissants.
WARNING Lorsqu’ils sont installés, les pieds antibasculement
situés à l’avant et à l’arrière doivent tous deux
rester en place pour assurer la stabilité de
l'armoire. Vous ne devez faire glisser hors de
l’armoire qu’un seul élément coulissant à la fois.
Medidas de seguridad para armarios
WARNING Los armarios son pesados aun cuando estén vacíos.
Tenga cuidado cuando mueva los armarios
independientemente de que haya equipo instalado
en el armario o no. Evite desplazar los armarios
sobre superficies rugosas o disparejas o pendientes
de más de 10 grados. Dos personas, como mínimo,
tienen que realizar la descarga de los armarios de la

9
plataforma de carga y mover los armarios.
WARNING Los productos deslizables no deben extenderse del
armario cuando el equipo se encuentre en la
plataforma de carga. Se debe descargar el armario
de la plataforma e instalar bien las punteras
delanteras y traseras de protección antes de
extender cualquier producto deslizable.
WARNING Una vez instalado, se deberán dejar puestas las
punteras de protección, delanteras y traseras, para
mantener la estabilidad. Se deberá extender un solo
producto deslizable cada vez.

10
Procedimentos de Segurança - Armários
WARNING Os armários são pesados, mesmo quando vazios.
Tenha cuidado ao movimentar os armários, quer
haja equipamentos instalados quer não. Evite
deslizar os armários sobre superficies acidentadas,
irregulares ou com inclinação superior a 10 graus. A
retirada dos armários do palete e sua
movimentação deverão ser feitas por, no mínimo,
duas pessoas.
WARNING Partes deslizantes não deverão ser abertas
enquanto o armário encontrar-se no palete de
embarque. O armário deve ser descarregado do
palete e os anteparos nos pés dianteiros e traseiros
devem ser instalados adequadamente antes de se
abrir qualquer parte deslizante.
WARNING Uma vez instalados, tanto os anteparos nos pés
dianteiros quanto nos traseiros devem permanecer
em seus lugares adequados para garantir a
estabilidade da peça. Deve-se abrir apenas uma
parte deslizante por vez.
Precauzioni di siccurezza sugli armadi
WARNING Gli armadi sono molto pesanti anche quando sono
vuoti. Esercitare la massima cautela durante lo
spostamento degli armadi indipendentemente dal
fatto che l'apparecchiatura sia installata o meno.
Evitare di far scorrere gli armadi su superfici
irregolari, disagevoli o con un’inclinazione
superiore ai 10 gradi. Servirsi di almeno due