HP JE009A User instructions

Models
HP 1910-48G Switch JE009A
HP 1910-24G-PoE (365 W) Switch JE007A
HP 1910-24G-PoE (170 W) Switch JE008A
HP 1910-24G Switch JE006A
HP 1910-16G Switch JE005A
HP 1910-8G Switch JG348A
HP 1910-8G-PoE+ (65W) Switch JG349A
HP 1910-8G-PoE+ (180W) Switch JG350A
HP 1910-24 Switch JG538A
HP 1910-8 Switch JG536A
HP 1910-48 Switch JG540A
HP 1910-8-PoE+ Switch JG537A
HP 1910-24-PoE+ Switch JG539A
Key features
Customized operation using intuitive Web interface
Layer 3 static routing with 32 routes for network segmentation and expansion
Access control lists for granular security control
Spanning Tree: STP, RSTP, and MSTP
Lifetime warranty
Product overview
The HP 1910 Switch Series are advanced smart-managed fixed-configuration Gigabit and Fast Ethernet switches designed for small
businesses in an easy-to-administer solution. By utilizing the latest design in silicon technology, this series is one of the most power-
efficient in the market.
The series has 13 models: eight gigabit and five Fast Ethernet. 8-, 16-, 24-, and 48-port 10/100/1000 models are equipped with
additional Gigabit SFP ports for fiber connectivity; in addition to non-PoE models, the 8- and 24-port gigabit models are available with
two different levels of PoE, or without. The 10/100 models are available with 8, 24 and 48 ports, and come with two additional combo
uplink ports; the 8- and 24-port fast ethernet models are available with or without PoE.
The HP 1910 Switch Series is a great value, with features to satisfy even the most advanced small business network. All models
support rack mounting or desktop operation. Customizable features include basic layer 2 features like VLANs and link aggregation as
well as advanced features such as Layer 3 static routing, IPv6, ACLs and Spanning Tree Protocols. These switches come with a lifetime
warranty covering the unit, fans, power supplies and 24X7 phone support for first three years.
Features and benefits
Management
Simple Web management
allows for easy management of the switch- even by nontechnical users- through an intuitive Web GUI; http and secure http
(https) is supported
QuickSpecs
HP 1910 Switch Series
Overview
DA - 13677 EMEA — Version 13 — February 25, 2014 Page 1

Single IP management
enables management of up to four HP 1910 devices using a single Web interface; simplifies management of multiple devices
Secure Web GUI
provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
SNMPv1, v2c, and v3
facilitates management of the switch, as the device can be discovered and monitored from an SNMP management station
Complete session logging
provides detailed information for problem identification and resolution
Dual flash images
provides independent primary and secondary operating system files for backup while upgrading
Port mirroring
enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
Management security
restricts access to critical configuration commands; offers multiple privilege levels with password protection; ACLs provide
telnet and SNMP access; local and remote syslog capabilities allow logging of all access
Network Time Protocol (NTP)
synchronizes timekeeping among distributed time servers and clients; keeps timekeeping consistent among all clock-dependent
devices within the network so that the devices can provide diverse applications based on the consistent time
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network
management applications
Limited CLI
enables users to quickly deploy and troubleshoot devices in the network
RMON
provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events
Default DHCP client mode
allows the switch to be directly connected to a network, enabling plug-and-play operation; in absence of DHCP server on the
network, the switch will fallback to a unique static address determined by the MAC address of the switch
Quality of Service (QoS)
Broadcast control
allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Rate limiting
sets per-port ingress enforced maximums and per-port, per-queue minimums
Traffic prioritization
provides time-sensitive packets (like VoIP and video) with priority over other traffic based on DSCP or IEEE 802.1p classification;
packets are mapped to four hardware queues for more effective throughput
Connectivity
IPv6
IPv6 host
enables switches to be managed and deployed at the IPv6 network's edge
IPv6 routing
supports IPv6 static routes
MLD snooping
forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding
IPv6 ACL/QoS
supports ACL and QoS for IPv6 network traffic
QuickSpecs
HP 1910 Switch Series
Overview
DA - 13677 EMEA — Version 13 — February 25, 2014 Page 2

Auto-MDI/MDIX
adjusts automatically for straight-through or crossover cables on all 10/100/1000 ports
IEEE 802.3X flow control
provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node
IEEE 802.3af Power over Ethernet (PoE) ready
provides up to 15.4 W per port to power standards-compliant IP phones, wireless LAN access points, Web cameras, and more (all
PoE models)
IEEE 802.3at Power over Ethernet (PoE+)
provides up to 30 W per port which allows support of the latest PoE+-capable devices such as IP phones, wireless access points,
and security cameras, as well as any IEEE 802.3af-compliant end device; eliminates the cost of additional electrical cabling and
circuits that would otherwise be necessary in IP phone and WLAN deployments.
(Note: applies to all PoE models, except the two 24G-PoE models which support a pre-standard implementation of PoE+)
Packet storm protection
protects against broadcast, multicast, or unicast storms with user-defined thresholds
Cable diagnostics
detects cable issues remotely, using a browser-based tool
Security
Advanced access control lists (ACLs)
enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater
flexibility with managing network access
Secure Sockets Layer (SSL)
encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
IEEE 802.1X and RADIUS network logins
controls port-based access for authentication and accountability
Automatic VLAN assignment
assigns users automatically to the appropriate VLAN based on their identity, location and time of day
STP BPDU port protection
blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
STP root guard
protects the root bridge from malicious attacks or configuration mistake
Automatic denial-of-service protection
monitors for malicious attacks and protects the network by blocking the attacks
Management password
provides security so that only authorized access to the Web browser interface is allowed
Performance
Half-/full-duplex auto-negotiating capability on every port
doubles the throughput of every port
Selectable queue configurations
allows for increased performance by selecting the number of queues and associated memory buffering that best meet the
requirements of the network applications
IGMP snooping
improves network performance through multicast filtering, instead of flooding traffic to all ports
Fiber uplink
provides greater distance connectivity using Gigabit fiber uplinks
Layer 2 switching
QuickSpecs
HP 1910 Switch Series
Overview
DA - 13677 EMEA — Version 13 — February 25, 2014 Page 3

VLAN support and tagging
supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
Spanning Tree Protocol (STP)
supports standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for faster convergence, and IEEE 802.1s
Multiple Spanning Tree Protocol (MSTP)
BPDU filtering
drops BPDU packets when STP is enabled globally but disabled on a specific port
Jumbo frame support
supports up to 10 kilobyte frame size to improve the performance of large data transfers
Layer 3 services
Address Resolution Protocol (ARP)
determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of
duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2
network
DHCP relay
simplifies management of DHCP addresses in networks with multiple subnets
Layer 3 routing
NEW Static IPv4/IPv6 routing
provides basic routing (supporting up to 32 static routes and 8 virtual VLAN interfaces); allows manual configuration of routing
Resiliency and high availability
Available redundant power supply
provides additional PoE of up to 740 W for high-power applications like HP Gigabit Ethernet IntelliJack switches; the HP RPS1600
Redundant Power System (JG136A), sold separately, is only for use with the 1910-24G-PoE (365W) Switch model
Link aggregation
groups together multiple ports (up to a maximum of 2 ports) automatically using Link Aggregation Control Protocol (LACP), or
manually, to form an ultra-high-bandwidth connection to the network backbone; helps prevent traffic bottlenecks
Convergence
LLDP-MED (Media Endpoint Discovery)
defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure
network devices such as IP phones
PoE allocations
supports multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user-specified) to allocate PoE power for more
efficient energy savings
Auto voice VLAN
recognizes IP phones and automatically assigns voice traffic to dedicated VLAN for IP phones
Additional information
Green initiative support
provides support for RoHS and WEEE regulation
Green IT and power
improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports and utilizes
variable-speed fans, reducing energy costs
QuickSpecs
HP 1910 Switch Series
Overview
DA - 13677 EMEA — Version 13 — February 25, 2014 Page 4

Warranty and support
Lifetime Warranty 2.0
advance hardware replacement for as long as you own the product with next-business-day delivery (available in most countries)†
Electronic and telephone support (for Lifetime Warranty 2.0)
limited 24x7 telephone support is available from HP for the first 3 years; limited electronic and business hours telephone
support is available from HP for the entire warranty period; to reach our support centers, refer to
www.hp.com/networking/contact-support ; for details on the duration of support provided with your product purchase, refer
to www.hp.com/networking/warrantysummary
†HP warranty includes repair or replacement of hardware for as long as you own the product, with next business day advance
replacement (available in most countries). The disk drive included with HP AllianceOne Advanced Services and Services zl Modules, HP
Threat Management Services zl Module, HP AllianceOne Extended zl Module with Riverbed Steelhead, HP MSM765zl Mobility Controller
and HP Survivable Branch Communication zl Module powered by Microsoft Lync has a five-year hardware warranty. For details, refer to
the Software license and hardware warranty statements at www.hp.com/networking/warranty .
QuickSpecs
HP 1910 Switch Series
Overview
DA - 13677 EMEA — Version 13 — February 25, 2014 Page 5

Build To Order
: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-
Shippable solution.
HP 1910-8 Switch JG536A
8 RJ-45 autosensing 10/100 ports
2 SFP dual-personality 1000 Mbps ports
min=0 \ max=2 SFP Transceivers
1U - Height
See Configuration
Note: 2,3
HP 1910-8 -PoE+ Switch JG537A
8 RJ-45 auto-negotiating 10/100 ports
2 SFP dual-personality 1000 Mbps ports
min=0 \ max=2 SFP Transceivers
1U - Height
See Configuration
Note:2,3
HP 1910-8G Switch JG348A
8 RJ-45 auto-negotiating 10/100/1000 ports
1 SFP 1000 Mbps port
min=0 \ max=1 SFP Transceiver
1U - Height
See Configuration
Note: 4,5
PDU Cable NA/MX/TW/JP JG348A#B2B
C15 PDU Jumper Cord (NA/MX/TW/JP)
PDU Cable ROW JG348A#B2C
C15 PDU Jumper Cord (ROW)
HP 1910-8G-PoE+ (65W) Switch JG349A
8 RJ-45 auto-negotiating 10/100/1000 ports
1 SFP 1000 Mbps port
min=0 \ max=1 SFP Transceiver
1U - Height
See Configuration
Note: 4,5
PDU Cable NA/MX/TW/JP JG349A#B2B
C15 PDU Jumper Cord (NA/MX/TW/JP)
PDU Cable ROW JG349A#B2C
C15 PDU Jumper Cord (ROW)
HP 1910-8G-PoE+ (180W) Switch JG350A
8 RJ-45 auto-negotiating 10/100/1000 ports
1 SFP 1000 Mbps port
min=0 \ max=1 SFP Transceiver
1U - Height
See Configuration
Note:4,5
PDU Cable NA/MX/TW/JP JG350A#B2B
QuickSpecs
HP 1910 Switch Series
Configuration
DA - 13677 EMEA — Version 13 — February 25, 2014 Page 6

C15 PDU Jumper Cord (NA/MX/TW/JP)
PDU Cable ROW JG350A#B2C
C15 PDU Jumper Cord (ROW)
HP 1910-16G Switch JE005A
16 RJ-45 auto-negotiating 10/100/1000 ports
4 SFP 1000 Mbps port
min=0 \ max=4 SFP Transceivers
1U - Height
See Configuration
Note:1, 5
PDU Cable NA/MX/TW/JP JE005A#B2B
C15 PDU Jumper Cord (NA/MX/TW/JP)
PDU Cable ROW JE005A#B2C
C15 PDU Jumper Cord (ROW)
HP 1910-24G-PoE (170W) Switch JE008A
24 RJ-45 auto-negotiating 10/100/1000 ports
4 SFP 1000 Mbps ports
min=0 \ max=4 SFP Transceivers
1U - Height
See Configuration
Note:1, 5
PDU Cable NA/MX/TW/JP JE008A#B2B
C15 PDU Jumper Cord (NA/MX/TW/JP)
PDU Cable ROW JE008A#B2C
C15 PDU Jumper Cord (ROW)
HP 1910-24G-PoE (365W) Switch JE007A
24 RJ-45 auto-negotiating 10/100/1000 ports
4 SFP 1000 Mbps ports
min=0 \ max=4 SFP Transceivers
1U - Height
See Configuration
Note:1, 5
PDU Cable NA/MX/TW/JP JE007A#B2B
C15 PDU Jumper Cord (NA/MX/TW/JP)
PDU Cable ROW JE007A#B2C
C15 PDU Jumper Cord (ROW)
HP 1910-24G Switch JE006A
24 RJ-45 auto-negotiating 10/100/1000 ports
4 SFP 1000 Mbps ports
min=0 \ max=4 SFP Transceivers
1U - Height
See Configuration
Note:1, 5
QuickSpecs
HP 1910 Switch Series
Configuration
DA - 13677 EMEA — Version 13 — February 25, 2014 Page 7

PDU Cable NA/MX/TW/JP JE006A#B2B
C15 PDU Jumper Cord (NA/MX/TW/JP)
PDU Cable ROW JE006A#B2C
C15 PDU Jumper Cord (ROW)
HP 1910-24 Switch JG538A
24 RJ-45 autosensing 10/100 ports
2 SFP dual-personality 1000 Mbps ports
min=0 \ max=2 SFP Transceivers
1U - Height
See Configuration
Note:2,3
HP 1910-24-PoE+ Switch JG539A
24 RJ-45 auto-negotiating 10/100 ports
2 SFP dual-personality 1000 Mbps ports
min=0 \ max=2 SFP Transceivers
1U - Height
See Configuration
Note: 2,3
HP 1910-48G Switch JE009A
48 RJ-45 auto-negotiating 10/100/1000 ports
4 SFP 1000 Mbps ports
min=0 \ max=4 SFP Transceivers
1U - Height
See Configuration
Note:1, 5
PDU Cable NA/MX/TW/JP JE009A#B2B
C15 PDU Jumper Cord (NA/MX/TW/JP)
PDU Cable ROW JE009A#B2C
C15 PDU Jumper Cord (ROW)
HP 1910-48 Switch JG540A
48 RJ-45 autosensing 10/100 ports
2 RJ-45 autosensing10/100/1000 ports
2 SFP 1000 Mbps ports
min=0 \ max=2 SFP Transceivers
1U - Height
See Configuration
Note: 2,3
QuickSpecs
HP 1910 Switch Series
Configuration
DA - 13677 EMEA — Version 13 — February 25, 2014 Page 8

Configuration Rules:
Note 1 The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
HP X121 1G SFP RJ45 T Transceiver J8177C
HP X120 1G SFP LC SX Transceiver JD118B
HP X120 1G SFP LC LX Transceiver JD119B
HP X125 1G SFP RJ45 T Transceiver JD089A
HP X125 1G SFP LC LH40 1310nm Transceiver JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver JD062A
HP X125 1G SFP LC LH70 Transceiver JD063B
HP X120 1G SFP LC BX 10-U Transceiver JD098B
HP X120 1G SFP LC BX 10-D Transceiver JD099B
Note 2 Localization required. (See Localization Menu for list.)
Note 3 The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
HP X120 1G SFP LC LX Transceiver JD119B
Note 4 The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
HP X121 1G SFP RJ45 T Transceiver J8177C
HP X120 1G SFP LC SX Transceiver JD118B
HP X120 1G SFP LC LX Transceiver JD119B
HP X120 1G SFP RJ45 T Transceiver JD089B
HP X125 1G SFP LC LH40 1310nm Transceiver JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver JD062A
HP X125 1G SFP LC LH70 Transceiver JD063B
Note 5 Localization (Wall Power Cord) required on orders without #B2B or #B2C (PDU Power Cord). (See
Localization Menu)
Internal or External Power Supplies(Model Dependant)
Internal Power supplies Included
External Redundant Power Supplies
HP RPS1600 Redundant Power System JG136A
Height = 1U
includes 1 x c13, 1600w and Power Supply port
See Configuration
Note:2,3,4
QuickSpecs
HP 1910 Switch Series
Configuration
DA - 13677 EMEA — Version 13 — February 25, 2014 Page 9

HP RPS1600 1600W AC Power Supply JG137A
Installs into JG136A only See Configuration
Note:1,3
Configuration Rules:
Note 1 If this power supply is selected, The JG136A - HP A-RPS1600 Redundant Power System
must be on order or onsite.
Note 2 Localization required.
Note 3 Each switch will only support 1 JG136A and 1 JG137A Power supply systems.
Note 4 This power supply only supported on switch JE007A.
Options for the HP 1600 External RPS Power Supply
HP X290 1000 A JD5 2m RPS Cable JD187A
See Configuration
Note:1
Remark: These cables are used to connect the External Power System to Switch.
Configuration Rules:
Note 1 This Cable is only supported on switch JE007A when used with the RPS 1600 (JG136A)
Transceivers
SFP Transceivers
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
HP X121 1G SFP RJ45 T Transceiver J8177C
HP X120 1G SFP LC SX Transceiver JD118B
HP X120 1G SFP LC LX Transceiver JD119B
HP X120 1G SFP RJ45 T Transceiver JD089B
HP X120 1G SFP LC BX 10-U Transceiver JD098B
HP X120 1G SFP LC BX 10-D Transceiver JD099B
HP X125 1G SFP LC LH40 1310nm Transceiver JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver JD062A
HP X125 1G SFP LC LH70 Transceiver JD063B
Cables
QuickSpecs
HP 1910 Switch Series
Configuration
DA - 13677 EMEA — Version 13 — February 25, 2014 Page 10