HP ProCurve 6600-24XG Assembly instructions

Product End-of-Life Disassembly Instructions
Product Category: Networking Equipment
Marketing Name / Model
[List multiple models if applicable.]
HP ProCurve Switch 6600-24XG (J9265A)
Name / Model #2
Name / Model #3
Name / Model #4
Name / Model #5
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Notes
Quantity
of items
included
in product
Item Description
With a surface greater than 10 sq cm
1Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)
Batteries All types including standard alkaline and lithium coin
or button style batteries 1
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries 0Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm Includes background illuminated displays with gas discharge lamps 0
Cathode Ray Tubes (CRT) 0
Capacitors / condensers (Containing PCB/PCT) 0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height 0
External electrical cables and cords 0
0Gas Discharge Lamps
Plastics containing Brominated Flame Retardants 0
Include the cartridges, print heads, tubes, vent
chambers, and service stations. 0Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos 0
Components, parts and materials containing
refractory ceramic fibers 0
Components, parts and materials containing
radioactive substances
EL-MF877-00 Page 1
Template Revision A
0

EL-MF877-00 Page 2
Template Revision A
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description Tool Size (if
applicable)
Phillips (Cross-slot) screwdriver
Torx T-10 Screwdriver
Torx T-15 Screwdriver
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Remove Power Supply - Qty 1 or 2 - see illustration below
2. Remove Fan Tray - see illustration below
3. Remove top cover - 12 screws on top
4. Remove BR2032 battery - Qty 1
5. Remove PCA mounting screws
6. Remove PCA from chassis
7.
8.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).