HP Q.11. (2510-24) User manual

Access Security Guide
2510
www.procurve.com
ProCurve Switches
Q.11. (2510-24)
U.11. (2510-48)
XX
XX

ProCurve Series 2510 Switches
Access Security Guide
January 2008

Hewlett-Packard Company
8000 Foothills Boulevard, m/s 5551
Roseville, California 95747-5551
http://www.procurve.com
© Copyright 2008 Hewlett-Packard Company, L.P.
The information contained herein is subject to change without
notice.
Publication Number
5991-4763
January 2008
Applicable Products
ProCurve Switch 2510-24 (J9019B)
ProCurve Switch 2510-48 (J9020A)
Trademark Credits
Windows NT®, Windows®, and MS Windows® are US
registered trademarks of Microsoft Corporation.
Software Credits
SSH on ProCurve Switches is based on the OpenSSH
software toolkit. This product includes software developed
by the OpenSSH Project for use in the OpenSSH Toolkit. For
more information on OpenSSH, visit www.openssh.com.
SSL on ProCurve Switches is based on the OpenSSL software
toolkit. This product includes software developed by the
OpenSSL Project for use in the OpenSSL Toolkit. For more
information on OpenSSL, visit
www.openssl.org.
This product includes cryptographic software written by
Eric Young ([e-mail])
This product includes software written by Tim Hudson
([email protected])
Disclaimer
HEWLETT-PACKARD COMPANY MAKES NO WARRANTY
OF ANY KIND WITH REGARD TO THIS MATERIAL,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not
be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing,
performance, or use of this material.
Hewlett-Packard Company shall not be liable for technical
or editorial errors or omissions contained herein. The
information is provided "as is" without warranty of any kind
and is subject to change without notice. The warranties for
Hewlett-Packard Company products are set forth in the
express limited warranty statements for such products.
Nothing herein should be construed as constituting an
additional warranty.
Hewlett-Packard assumes no responsibility for the use or
reliability of its software on equipment that is not furnished
by Hewlett-Packard.
Warranty
See the Customer Support/Warranty booklet included with
the product.
A copy of the specific warranty terms applicable to your
Hewlett-Packard products and replacement parts can be
obtained from your HP Sales and Service Office or
authorized dealer.

iii
Contents
Product Documentation
About Your Switch Manual Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Feature Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xii
1 Getting Started
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Overview of Access Security Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Management Access Security Protection . . . . . . . . . . . . . . . . . . . . . . . . 1-3
General Switch Traffic Security Guidelines . . . . . . . . . . . . . . . . . . . . . . 1-4
Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Command Syntax Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Command Prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
Screen Simulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
Port Identity Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
Sources for More Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
Need Only a Quick Start? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
IP Addressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
To Set Up and Install the Switch in Your Network . . . . . . . . . . . . . . . . 1-9
2 Configuring Username and Password Security
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Configuring Local Password Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Menu: Setting Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
CLI: Setting Passwords and Usernames . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Web: Setting Passwords and Usernames . . . . . . . . . . . . . . . . . . . . . . . . 2-6

iv
Front-Panel Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
When Security Is Important . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
Front-Panel Button Functions ‘ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8
Configuring Front-Panel Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
Password Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15
Password Recovery Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17
3 Web and MAC Authentication
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Client Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
How Web and MAC Authentication Operate . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Authenticator Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
Operating Rules and Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
General Setup Procedure for Web/MAC Authentication . . . . . . . . . . . . . . 3-12
Do These Steps Before You Configure Web/MAC Authentication . . 3-12
Additional Information for Configuring the RADIUS
Server To Support MAC Authentication . . . . . . . . . . . . . . . . . . . . . . . . 3-14
Configuring the Switch To Access a RADIUS Server . . . . . . . . . . . . . . . . 3-15
Configuring Web Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17
Configure the Switch for Web-Based Authentication . . . . . . . . . . . . . 3-18
Configuring MAC Authentication on the Switch . . . . . . . . . . . . . . . . . . . . 3-22
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22
Configure the Switch for MAC-Based Authentication . . . . . . . . . . . . 3-23
Show Status and Configuration of Web-Based Authentication . . . . . . . . 3-26
Show Status and Configuration of MAC-Based Authentication . . . . . . . . 3-28
Show Client Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-30

v
4 TACACS+ Authentication
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Terminology Used in TACACS Applications: . . . . . . . . . . . . . . . . . . . . . . . . 4-3
General System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
General Authentication Setup Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Configuring TACACS+ on the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
CLI Commands Described in this Section . . . . . . . . . . . . . . . . . . . . . . . 4-9
Viewing the Switch’s Current Authentication Configuration . . . . . . . 4-9
Viewing the Switch’s Current TACACS+ Server
Contact Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
Configuring the Switch’s Authentication Methods . . . . . . . . . . . . . . . 4-11
Configuring the Switch’s TACACS+ Server Access . . . . . . . . . . . . . . 4-15
How Authentication Operates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20
General Authentication Process Using a TACACS+ Server . . . . . . . . 4-20
Local Authentication Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22
Using the Encryption Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23
Controlling Web Browser Interface Access When Using TACACS+
Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24
Messages Related to TACACS+ Operation . . . . . . . . . . . . . . . . . . . . . . . . . 4-25
Operating Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25
5 RADIUS Authentication and Accounting
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Switch Operating Rules for RADIUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
General RADIUS Setup Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

vi
Configuring the Switch for RADIUS Authentication . . . . . . . . . . . . . . . . . . 5-6
Outline of the Steps for Configuring RADIUS Authentication . . . . . . 5-7
1. Configure Authentication for the Access Methods
You Want RADIUS To Protect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8
2. Configure the Switch To Access a RADIUS Server . . . . . . . . . . . . 5-10
3. Configure the Switch’s Global RADIUS Parameters . . . . . . . . . . . 5-12
Local Authentication Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16
Controlling Web Browser Interface Access When Using RADIUS
Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17
Configuring RADIUS Accounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17
Operating Rules for RADIUS Accounting . . . . . . . . . . . . . . . . . . . . . . 5-19
Steps for Configuring RADIUS Accounting . . . . . . . . . . . . . . . . . . . . . 5-19
Viewing RADIUS Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-25
General RADIUS Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-25
RADIUS Authentication Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-28
RADIUS Accounting Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-29
Changing RADIUS-Server Access Order . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-30
Messages Related to RADIUS Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-32
6 Configuring Secure Shell (SSH)
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Prerequisite for Using SSH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
Public Key Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
Steps for Configuring and Using SSH
for Switch and Client Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6
General Operating Rules and Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
Configuring the Switch for SSH Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
1. Assign Local Login (Operator) and Enable (Manager) Password . 6-9
2. Generate the Switch’s Public and Private Key Pair . . . . . . . . . . . . 6-10
3. Provide the Switch’s Public Key to Clients . . . . . . . . . . . . . . . . . . . 6-12

vii
4. Enable SSH on the Switch and Anticipate SSH
Client Contact Behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15
5. Configure the Switch for SSH Authentication . . . . . . . . . . . . . . . . . 6-18
6. Use an SSH Client To Access the Switch . . . . . . . . . . . . . . . . . . . . . 6-22
Further Information on SSH Client Public-Key Authentication . . . . . . . . 6-23
Messages Related to SSH Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-29
7 Configuring Secure Socket Layer (SSL)
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
Prerequisite for Using SSL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5
Steps for Configuring and Using SSL for
Switch and Client Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5
General Operating Rules and Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6
1. Assign Local Login (Operator) and Enable (Manager) Password . 7-7
2. Generate the Switch’s Server Host Certificate . . . . . . . . . . . . . . . . . 7-8
3. Enable SSL on the Switch and Anticipate SSL
Browser Contact Behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17
Common Errors in SSL Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-21
8 Configuring Port-Based and Client-Based
Access Control (802.1X)
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3
Why Use Port-Based or Client-Based Access Control? . . . . . . . . . . . . 8-3
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3
User Authentication Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4
Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7
General 802.1X Authenticator Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10
Example of the Authentication Process . . . . . . . . . . . . . . . . . . . . . . . . 8-10
Switch-Port Supplicant Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11
General Operating Rules and Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12

viii
General Setup Procedure for 802.1X Access Control . . . . . . . . . . . . . . . . 8-14
Do These Steps Before You Configure 802.1X Operation . . . . . . . . . 8-14
Overview: Configuring 802.1X Authentication on the Switch . . . . . . 8-15
Configuring Switch Ports as 802.1X Authenticators . . . . . . . . . . . . . . . . . 8-17
1. Enable 802.1X Authentication on Selected Ports . . . . . . . . . . . . . . 8-17
2. Reconfigure Settings for Port-Access . . . . . . . . . . . . . . . . . . . . . . . . 8-20
3. Configure the 802.1X Authentication Method . . . . . . . . . . . . . . . . . 8-23
4. Enter the RADIUS Host IP Address(es) . . . . . . . . . . . . . . . . . . . . . . 8-24
5. Enable 802.1X Authentication on the Switch . . . . . . . . . . . . . . . . . 8-24
6. Optionally Resetting Authenticator Operation . . . . . . . . . . . . . . . . 8-25
802.1X Open VLAN Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-26
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-26
VLAN Membership Priorities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-27
Use Models for 802.1X Open VLAN Modes . . . . . . . . . . . . . . . . . . . . . 8-28
Operating Rules for Authorized-Client and
Unauthorized-Client VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-31
Setting Up and Configuring 802.1X Open VLAN Mode . . . . . . . . . . . . 8-34
802.1X Open VLAN Operating Notes . . . . . . . . . . . . . . . . . . . . . . . . . . 8-38
Option For Authenticator Ports: Configure Port-Security To Allow
Only 802.1X Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-40
Configuring Switch Ports To Operate As
Supplicants for 802.1X Connections to Other Switches . . . . . . . . . . . . . . 8-42
Displaying 802.1X Configuration, Statistics, and Counters . . . . . . . . . . . . 8-47
Show Commands for Port-Access Authenticator . . . . . . . . . . . . . . . . 8-47
Viewing 802.1X Open VLAN Mode Status . . . . . . . . . . . . . . . . . . . . . . 8-50
Show Commands for Port-Access Supplicant . . . . . . . . . . . . . . . . . . . 8-53
How RADIUS/802.1X Authentication Affects VLAN Operation . . . . . . . . 8-54
Messages Related to 802.1X Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-58

ix
9 Configuring and Monitoring Port Security
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
Blocking Unauthorized Traffic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3
Trunk Group Exclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4
Planning Port Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-5
Port Security Command Options and Operation . . . . . . . . . . . . . . . . . . . . . 9-6
Retention of Static MAC Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
Displaying Current Port Security Settings . . . . . . . . . . . . . . . . . . . . . . 9-10
Configuring Port Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-12
Web: Displaying and Configuring Port Security Features . . . . . . . . . . . . . 9-17
Reading Intrusion Alerts and Resetting Alert Flags . . . . . . . . . . . . . . . . . . 9-17
Notice of Security Violations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-17
How the Intrusion Log Operates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-18
Keeping the Intrusion Log Current by Resetting Alert Flags . . . . . . . 9-19
Using the Event Log To Find Intrusion Alerts . . . . . . . . . . . . . . . . . . . 9-24
Web: Checking for Intrusions, Listing Intrusion Alerts,
and Resetting Alert Flags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-25
Operating Notes for Port Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-25
Configuring Protected Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-27
10 Using Authorized IP Managers
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2
Configuration Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3
Access Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3
Defining Authorized Management Stations . . . . . . . . . . . . . . . . . . . . . . . . . 10-4
Overview of IP Mask Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-4
Menu: Viewing and Configuring IP Authorized Managers . . . . . . . . . 10-5
CLI: Viewing and Configuring Authorized IP Managers . . . . . . . . . . . 10-6
Web: Configuring IP Authorized Managers . . . . . . . . . . . . . . . . . . . . . . . . . 10-9

x
Building IP Masks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-9
Configuring One Station Per Authorized Manager IP Entry . . . . . . . 10-9
Configuring Multiple Stations Per Authorized Manager IP Entry . . 10-10
Additional Examples for Authorizing Multiple Stations . . . . . . . . . 10-12
Operating Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-12

xi
Product Documentation
About Your Switch Manual Set
The switch manual set includes the following:
■Read Me First - a printed guide shipped with your switch. Provides
software update information, product notes, and other information.
■Installation and Getting Started Guide - a printed guide shipped
with your switch. This guide explains how to prepare for and perform
the physical installation and connection to your network.
■Management and Configuration Guide - a PDF file on the
ProCurve Networking Web Site. This guide describes how to
configure, manage, and monitor basic switch operation.
■Advanced Traffic Management Guide - a PDF file on the ProCurve
Networking Web Site. This guide explains the configuration and
operation of traffic management features such as spanning tree and
VLANs.
■Access Security Guide - a PDF file on the ProCurve Networking
Web Site. This guide explains the configuration and operation of
access security and user authentication features on the switch.
■Release Notes - posted on the ProCurve web site to provide
information on software updates. The release notes describe new
features, fixes, and enhancements that become available between
revisions of the above guides.
Note For the latest version of all ProCurve switch documentation, including release
notes covering recently added features, visit the ProCurve Networking
website at www.procurve.com. Click on Technical support, and then click on
Product manuals (all).

xii
Product Documentation
Feature Index
For the manual set supporting your switch model, the following feature index
indicates which manual to consult for information on a given software feature.
Feature Management and
Configuration
AdvancedTraffic
Management
Access Security
Guide
802.1Q VLAN Tagging - X-
802.1p Priority X- -
802.1X Authentication - - X
Authorized IP Managers -- X
Config File X--
Copy Command X- -
Debug X--
DHCP Configuration -X-
DHCP/Bootp Operation X--
Diagnostic Tools X- -
Downloading Software X--
Event Log X- -
Factory Default Settings X--
File Management X- -
File Transfers X--
GVRP -X-
IGMP - X-
Interface Access (Telnet, Console/Serial, Web) X- -
IP Addressing X--
LACP X- -
Link X--

xiii
Product Documentation
LLDP X- -
MAC Address Management X--
Monitoring and Analysis X- -
Multicast Filtering - X-
Network Management Applications (LLDP, SNMP) X- -
Passwords - - X
Ping X- -
Port Configuration X--
Port Security -- X
Port Status X--
Port Trunking (LACP) X- -
Port-Based Access Control - - X
Port-Based Priority (802.1Q) X- -
Quality of Service (QoS) - X-
RADIUS Authentication and Accounting -- X
Secure Copy X--
SFTP X- -
SNMP X--
Software Downloads (SCP/SFTP, TFTP, Xmodem) X- -
Spanning Tree (MSTP) - X-
SSH (Secure Shell) Encryption -- X
SSL (Secure Socket Layer) - - X
Stack Management (Stacking) -X-
Syslog X--
System Information X- -
TACACS+ Authentication - - X
Feature Management and
Configuration
AdvancedTraffic
Management
Access Security
Guide

xiv
Product Documentation
Telnet Access X- -
TFTP X--
Time Protocols (TimeP, SNTP) X- -
Troubleshooting X--
VLANs -X-
Xmodem X--
Feature Management and
Configuration
AdvancedTraffic
Management
Access Security
Guide

1-1
1
Getting Started
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Overview of Access Security Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Management Access Security Protection . . . . . . . . . . . . . . . . . . . . . . . . 1-3
General Switch Traffic Security Guidelines . . . . . . . . . . . . . . . . . . . . . . 1-4
Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Command Syntax Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Command Prompts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
Screen Simulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
Port Identity Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
Sources for More Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
Need Only a Quick Start? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
IP Addressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
To Set Up and Install the Switch in Your Network . . . . . . . . . . . . . . . . 1-9

1-2
Getting Started
Introduction
Introduction
This Access Security Guide describes how to use ProCurve’s switch security
features to protect access to your switch. This guide is intended to support
the following switches:
■ProCurve Switch 2510-24
■ProCurve Switch 2510-48
For an overview of other product documentation for the above switches, refer
to “Product Documentation” on page xi.
You can download a copy from the ProCurve Networking website,
www.procurve.com.
Overview of Access Security Features
The access security features covered in this guide include:
■Local Manager and Operator Passwords (page 2-1): Control
access and privileges for the CLI, menu, and web browser interfaces.
■TACACS+ Authentication (page 4-1): Uses an authentication appli-
cation on a server to allow or deny access to a switch.
■RADIUS Authentication and Accounting (page 5-1): Like
TACACS+, uses an authentication application on a central server to
allow or deny access to the switch. RADIUS also provides accounting
services for sending data about user activity and system events to a
RADIUS server.
■Secure Shell (SSH) Authentication (page 6-1): Provides
encrypted paths for remote access to switch management functions.
■Secure Socket Layer (SSL) (page 7-1): Provides remoteweb access
to the switch via encrypted authentication paths between the switch
and management station clients capable of SSL/TLS operation.

1-3
Getting Started
Overview of Access Security Features
■Port-Based Access Control (802.1X) (page 8-1): On point-to-point
connections, enables the switch to allow or deny traffic between a
port and an 802.1X-aware device (supplicant) attempting to access
the switch. Also enables the switch to operate as a supplicant for
connections to other 802.1X-aware switches.
■Port Security (page 9-1): Enables a switch port to maintain a unique
list of MAC addresses defining which specific devices are allowed to
access the network through that port. Also enables a port to detect,
prevent, and log access attempts by unauthorized devices.
■Authorized IP Managers (page 10-1): Allows access to the switch
by a networked device having an IP address previously configured in
the switch as “authorized”.
Management Access Security Protection
In considering management access security for your switch, there are two key
areas to protect:
■Unauthorized client access to switch management features
■Unauthorized client access to the network.
Table 1-1 on page 1-4 provides an overview of the type of protection offered
by each switch security feature.
Note ProCurve recommends that you use local passwords together with your
switch’s other security features to provide a more comprehensive security
fabric than if you use only local passwords.

1-4
Getting Started
Overview of Access Security Features
Table 1-1. Management Access Security Protection
General Switch Traffic Security Guidelines
Where the switch is running multiple security options, it implements network
traffic security based on the OSI (Open Systems Interconnection model)
precedence of the individual options, from the lowest to the highest. The
following list shows the order in which the switch implements configured
security features on traffic moving through a given port.
1. Disabled/Enabled physical port
2. Port security
3. Authorized IP Managers
4. Application features at higher levels in the OSI model, such as SSH
(The above list does not address the mutually exclusive relationship that
exists among some security features.)
Security Feature Offers Protection Against Unauthorized Client Access to
Switch Management Features
Offers Protection
Against
Unauthorized Client
Access to the
Network
Connection Telnet SNMP
(Net Mgmt)
Web
Browser
SSH
Client
Local Manager and Operator
Usernames and Passwords1PtP: Yes No Yes Yes No
Remote: Yes No Yes Yes No
TACACS+ PtP: Yes No No Yes No
Remote: Yes No No Yes No
RADIUS PtP: Yes No No Yes No
Remote: Yes No No Yes No
SSH Ptp: Yes No No Yes No
Remote: Yes No No Yes No
SSL Ptp: No No Yes No No
Remote: No No Yes No No
Port-Based Access Control (802.1X) PtP: Yes Yes Yes Yes Yes
Remote: No No No No No
Port Security (MAC address) PtP: Yes Yes Yes Yes Yes
Remote: Yes Yes Yes Yes Yes
Authorized IP Managers PtP: Yes Yes Yes Yes No
Remote: Yes Yes Yes Yes No