HPE Aruba 6300M Assembly instructions

MF877-00 Page 1
Template Revision C, 30-July-2018
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Networking
Marketing Name / Model
[List multiple models if applicable.]
JL762A: Aruba 6300M 48G Pwr2Prt 2F 1PS Bdl
Name / Model #2
Name / Model #3
Name / Model #4
Name / Model #5
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by
Directive 2012/19/EU of the European Parliament and of the Council on Waste Electrical and Electronic Equipment
(WEEE).
1.0
Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm 3
Batteries All types including standard alkaline and lithium
coin or button style batteries
1
Mercury-containing components For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Components and waste containing asbestos

MF877-00 Page 2
Template Revision C, 30-July-2018
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at MF877-01
Item Description Notes
Quantity
of items
included
in product
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description Tool Size (if
applicable)
Torque Driver (Standard)
Torque Bit T10
Torque Bit T25
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Remove PULL OUT
2. Press handle and remove – 1 pc of BLANK FILLER
3. Press handle and remove – 1 Unit of Power Supply
4. Unscrew and remove – 2 units of FAN TRAY
5. Unscrew and remove – M5 SCREW at 1 location
6. Unscrew and remove – M3 SCREW at 16 Locations and CHASSIS COVER
7. Unplug and remove – CABLE connect between PCBA, MAIN BOARD and PCBA, FAN BRIDGING BOARD
8. Unplug – FFC CABLE from PCBA, LED BOARD
9. Unscrew and remove – M3 SCREW at 2 locations
10. Remove – PCBA, LED BOARD
11. Remove - PUSHBUTTON
12. Unscrew and remove – M3 SCREW at 4 Locations and PCBA, FAN BRIDGING BOARD
13. Unscrew and remove - M3 SCREW at 11 Locations and PCBA, MAIN BOARD
14. Remove - COIN BATTERY from BATTERY SOCKET
15. Unplug – FFC CABLE from PCBA, MAIN BOARD
16. Remove - INSULATOR from CHASSIS
17. Remove - INSULATOR from CHASSIS
18. Remove – FRONT OVERLAY from CHASSIS

MF877-00 Page 3
Template Revision C, 30-July-2018
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at MF877-01
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
1
2
4
4
5
6
6
6
3

MF877-00 Page 4
Template Revision C, 30-July-2018
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at MF877-01
7
8
9
10
11

MF877-00 Page 5
Template Revision C, 30-July-2018
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at MF877-01
12
13
15
14

MF877-00 Page 6
Template Revision C, 30-July-2018
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at MF877-01
16
17
1
8