H+1 AFINIA 3D User manual
H. Printer Description
[Front]
Power Switch
Filament Bay
Right Side Handle
Top Lid
Ethernet Socket
USB Port
Power Socket
[Right]
[Back]
Quick Start Guide
Afinia 3D
8150 Mallory Court
Chanhassen, MN 55346, USA
Tel: +1 888-215-3966
www.afinia.com
Email: [email protected]
USA Phone: 952-279-2643
Technical Support:
G. WARNINGS
WARNING, HOT SURFACES!
Extruder and build platform can reach very high temperatures.
WARNING! Fast moving parts. Tie back loose hair, secure
loose clothing and keep all printer doors closed during
operation.
Do not leave the printer unattended during operation. Watch
to make sure the first few layers adhere correctly.
Dual Filters
Build Platform
Waste Tray
Front Door
Touchscreen
USB Port
For full user manual,
visit www.afinia.com/support/manuals-guides/
Japan Phone: 03-3561-2266
G. Warnings
WARNING: This 3D Printer - when used with styrene
filament (ABS / HIPS / PC-ABS) - can expose you and
others in the same room to styrene, a chemical known
to the State of California to cause cancer.
www.P65Warnings.ca.gov
ALWAYS OPERATE THIS PRODUCT IN A
WELL-VENTILATED AREA.
