Contents
1Safety........................................................................................................................3
1.1 Symbols used............................................................................................................ 3
1.2 Regulation use .......................................................................................................... 3
1.3 General safety........................................................................................................... 4
1.4 Use in clean rooms.................................................................................................... 4
1.5 Use in explosive environments.................................................................................. 4
1.6 Technical condition of the linear unit.......................................................................... 5
1.7 Modifications to the linear unit ................................................................................... 6
1.8 Requirements for personnel....................................................................................... 6
1.9 Obligations of the operating company........................................................................ 7
2Warranty ...................................................................................................................7
3Technical data –Standard model...........................................................................8
4Product description...............................................................................................14
5Transportation and storage ..................................................................................17
6Installation and adjustment...................................................................................18
6.1 Installing the linear unit by mounting rails ................................................................ 18
6.2 Screwing the linear unit into place from below......................................................... 19
6.3 Setting maximum travel........................................................................................... 19
6.3.1 Setting the positions of the inductive limit switches ..................................20
6.3.2 Setting the positions of the mechanical limit switches...............................21
6.4 Mounting a drive unit ............................................................................................... 22
6.4.1 Mounting a motor.....................................................................................23
7Start-up...................................................................................................................24
8Operation................................................................................................................25
9Shutdown................................................................................................................25
10 Maintenance...........................................................................................................26
10.1 Lubrication............................................................................................................... 26
10.2 Replacing the timing belt ......................................................................................... 30
10.3 Replacing cover bands............................................................................................ 34
