HTC PM-6102 User manual

User's Manual
HTC Manometer
Please read this user's manual thoroughly before using
this unit and keep it properly for your future reference.

Contents
1. Safety .....................................................................................1
2. Introduction ..........................................................................2
3. Error Warning........................................................................2
4. Specification..........................................................................3
5. Meter Description ................................................................5
6. LCD display............................................................................6
7. Operation steps....................................................................6
8. Buttons function...................................................................6
9. Notes......................................................................................8
10. Accessories..........................................................................8

1
1. Safety
Read the following safety information carefully before attempting to operate
or service the meter.
Use the meter only as specified in this manual; otherwise, the protection
provided by the meter may be impaired.
▲Environment conditions:
1) RH≤90％（Non-Condensation）
2) Operating Temperature-0～40℃
Maintenance and cleaning
1) Repairs or servicing not covered in this manual should only be performed by
qualified personnel.
2) Wipe the unit with a dry soft cloth. Do not use solvents or detergents on this
instrument.
Safety Symbol
Comply with EMC

2
2. Introduction
This product is aimed to measure different pressure values, here are some units
for Choice: inH2O, psi ,bar, mbar , kPa, inHg, mmHg ,ozin2 ,,ftH2O,
cmH2O ,kgcm2.equipped with simple Tube connection. It is widely used in
measurement of ventilation and air conditioning system, clean room or any gas
pressure system troubleshooting .Easy operation and clear reading.
3. Error Warning
When internal diagnostic test fails, an error message will appear on the
LCD display.
error1：max pressure
error2：below min pressure

3
4. Specification
unit
PM-6102
PM-6105
PM-6115
Range
Resolution
Range
Resolution
Range
Resolution
inH2O
±55.40
0.01
±138
0.1
±415.2
0.1
Psi
±2.000
0.001
±5.000
0.001
±15.00
0.01
Mbar
±137.8
0.1
±344.7
0.1
±1034
1
KPa
±13.79
0.01
±34.47
0.01
±103.4
0.1
inHg
±0.407
0.001
±1.018
0.001
±30.54
0.01
mmHg
±103.4
0.1
±258.5
0.1
±775.7
0.1
ozin²
±32.00
0..01
±80
1
±240.0
0.1
ftH2O
±4.612
0.001
±11.53
0.01
±34.60
0.01
cmH2O
±140.6
0.1
±351.5
0.1
±1055
1
kgcm²
±0.140
0.001
±0.351
0.001
±1.055
0.001
bar
±0.137
0.001
±0.344
0.001
±1.034
0.001
Maximum Pressure Psi
10 Psi
20 Psi
100 Psi
Accuracy
±0.3%FS
Linearity/Hysteresis
±0.1%FS
Repeatability
±0.25%FS
Pressure connector
1/8〞（3.18mm）quick connector
Working temperature
0～40℃/32～104℉
Storage temperature
-10～60℃/14～140℉
Over range indication
ERR1 or ERR2
Work current
9V battery

4
unit
PM-6130
PM-6175
Range
Resolution
Resolution
Range
inH2O
±830
1
±2078
1
Psi
±30.00
0.01
±75.00
0.01
Mbar
±2608
1
±5168
1
KPa
±206.8
0.1
±517.1
0.1
inHg
±61.08
0.01
±15.00
0.01
mmHg
±1551
1
±3878
1
ozin²
±480.0
0.1
±1200
0.1
ftH2O
±69.2
0.01
±173.0
0.01
cmH2O
±2109
1
±5272
1
kgcm²
±2.109
0.001
±5.250
0.001
bar
±2.068
0.001
±5.138
0.001
Maximum Pressure Psi
100Psi
100Psi
accuracy
±0.3%FS
Linearity/Hysteresis
±0.1%FS
Repeatability
±0.25%FS
Pressure connector
1/8〞（3.18mm）quick connector
Working temperature
0～40℃/32～104℉
Storage temperature
-10～60℃/14～140℉
Over range indication
ERR1 or ERR2
Work current
9V battery

5
5. Meter Description
①Air intake
②LCD Display
③Power key
④Backlight key
⑤Unit key
⑥Hold button
⑦record key
6. LCD display
①Data record
②Record mode
③Max Min, Avg
④Readings
⑤Unit
⑥Low battery indication
⑦Memory time

6
7. Operation steps
7.1 Open battery cover and install a 9-volt battery in the battery compartment.
Press power key to start measuring
7.2 press UNITS key，choosing proper unit
7.3 connect Tube
7.4 read the testing values on LCD display
Note：when the meter is on, no gas pressure input, the meter will not
necessarily be zero, you need to reset by yourself.
8. Buttons function
8.1 Key；it can turn on and turn off the meter，press“ ”, open
manometer, the screen will display about 2 seconds, and then enter normal
measurement model.
8.2 Key；after power on the meter，pressing this button can turn on and
turn off the backlight.
8.3 Key；in measurement mode，press“ ”, it can review Max ,Min, Avg
values. In this mode, other button functions are locked not operated. Press

7
“ ”for three seconds，the meter exits record model.
8.4 key；after power on the meter，press“ ”，it can
convert the units of measurement： bar,mmHg,Ozin2,Kgcm2,psi,inH2O,Kpa,ft
H2O,inHg,cmH2O,mbar.
8.5 key；
8.5.1 After the meter power on，press“ ”button once，the screen will
be locked, press“ ”again，it will cancel this function.
8.5.2 After power on the meter，no gas pressure input，press“ ”for three
seconds，LCD screen display“----”，the meter reset.
8.6 Automatically power on/off；the meter will automatically turn off after
approx. 25 minutes of inactivity. It can save battery’s life. If you do not want to
turn off, first press ,then press ,”ON “will appear on the LCD
display, it indicates that power off function is disabled.

8
9. Notes
1. Do not use it in high temperature and humidity。
2. Remove the battery when the meter is to be stored for long periods of
time to avoid battery leakage.
3. Replace new batteries when the low battery icon " " appears.
10. Accessories
①Manual
②Canvas ba
③6F22 9V battery
④∮4.5mm mental gas mouth 2 PCS
⑤∮5.0mm*30mm soft Tube 2PCS
⑥∮5.0mm*30mm hard Tube 2PCS