HUANUO HNSSD4 User manual

Thank you for choosing our product! We strive to provide the best quality
and services for our customers. Would you kindly share your experience
on Amazon if you are satisfied? Should you have any issues, please don't
hesitate to contact us.
Telephone：[phone] Mon-Fri 10am - 6pm (PST) (USA) (CAN)
Email：[email protected] (US/CA/DE/UK/FR/IT/ES/JP/AU)
Installation Instruction V1.0
HNSSD4

DO NOT place hands on or near support bars. Pinch points are
created during lifting and lowering the work surface. Failure to
follow these instructions may result in serious personal injury.
WARNING
PINCH POINT
22lbs/(10kgs)
Tools Required (Not Included)
Warning:
Impact Hazard! Moving parts
can Crush and Cut.
A
1
743 mm/29.3”
330 mm/13”
655 mm/25.8”
45 mm-410 mm
1.8”-16.1”
450 mm/17.7”
CAUTION:
DO NOT EXCEED MAXIMUM
LISTED WEIGHT CAPACITY,
OR SERIOUS INJURY AND/OR
PROPERTY DAMAGE MAY
OCCUR!
Components
Features & Specifications
1

A
The desktop rises
Hands must not exceed the safety shield
below the tabletop, otherwise they will be
pinched.
Stepless height
adjustment
Step 1
Step 2 Step 3
When carrying the lift table, be sure to hold the bottom with both hands.
Do not subject the table to a separate force. This can cause the tabletop
to be out of step with the bottom structure.
2

Keep the whole monitor and laptop base on
the work surface. Allowing any part of base
or stand to hang off the edge may result in
property damage and/or personal injury.
Raise worksurface slowly. Raising
worksurface too fast may create an
unstable situation resulting in property
damage and/or personal injury.
To avoid the potential to pinch cables it is
important to follow the cable routing
instructions in this manual. Failure to follow
these instructions may result in equipment
damage and/or personal injury.
Leave enough slack in cable to allow for
full range of vertical motion (16.7”/ 42.4
cm). Failure to heed this warning may
result in property damage and/or personal
injury.
Step 4
3