Huawei HG256s User manual

HUAWEI HG256s Home Gateway
User Guide
HUAWEI TECHNOLOGIES CO., LTD.

HUAWEI HG256s
V100R001
User Guide
Issue 03
Date 2011-03-09
Part Number 202289
Huawei Technologies Co., Ltd. provides customers with comprehensive technical
support and service. For any assistance, please contact our local office or company
headquarters.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: [email protected]
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any
means without prior written consent of Huawei Technologies Co., Ltd.
The product described in this manual may include copyrighted software of Huawei
Technologies Co., Ltd and possible licensors. Customers shall not in any manner
reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse
engineer, lease, assign, or sublicense the said software, unless such restrictions are
prohibited by applicable laws or such actions are approved by respective copyright
holders under licenses.
Trademarks and Permissions
, , and are trademarks or registered trademarks of Huawei
Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the property
of their respective owners.
Notice
Some features of the product and its accessories described herein rely on the
software installed, capacities and settings of local network, and may not be activated
or may be limited by local network operators or network service providers. Thus the
descriptions herein may not exactly match the product or its accessories you
purchase.
Huawei Technologies Co., Ltd reserves the right to change or modify any information
or specifications contained in this manual without prior notice or obligation.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS
REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE
SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS,
BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations and
will obtain all necessary governmental permits and licenses in order to export,
re-export or import the product mentioned in this manual including the software and
technical data therein.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

HUAWEI HG256s
User Guide Contents
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
i
Contents
1 Warnings and Precautions .................................................................................. 1-1
2 Product Overview ................................................................................................. 2-1
2.1 Product Features.......................................................................................................... 2-1
2.2 Hardware..................................................................................................................... 2-1
2.2.1 Interfaces and Buttons..................................................................................... 2-1
2.2.2 Indicators......................................................................................................... 2-2
3 Hardware Installation and Quick Start ............................................................ 3-1
3.1 Selecting a Position for the HG256s............................................................................ 3-1
3.2 Knowing Cable Connections....................................................................................... 3-1
3.3 Powering On the HG256s............................................................................................ 3-2
3.4 Logging In to the Web-Based Configuration Utility ................................................... 3-2
4 Configuration of WLAN Parameters................................................................. 4-1
4.1 Setting the WLAN Parameters of the Router .............................................................. 4-1
4.2 Setting Up a Wireless Connection Manually............................................................... 4-1
4.3 Setting Up a Wireless Connection by the WPS Button ............................................... 4-3
5 Configuration of VoIP ......................................................................................... 5-1
5.1 Networking.................................................................................................................. 5-1
5.2 Configuration Introduction.......................................................................................... 5-2
6 Configuring Frequently Used Functions.......................................................... 6-1
6.1 Enabling or Disabling the WLAN Function................................................................ 6-1
6.2 Improving the Security of a WLAN ............................................................................ 6-2
6.2.1 Hiding the Name of a WLAN ......................................................................... 6-2
6.2.2 Changing the Name of a WLAN..................................................................... 6-3
6.2.3 Using Secure Encryption................................................................................. 6-4
6.2.4 Allowing Only Specified PCs to Be Connected to a WLAN .......................... 6-5
6.3 Using the Home Storage Function............................................................................... 6-7
6.4 Controlling the Internet Access Rights of PCs ............................................................ 6-9
6.5 Prohibiting PCs from Accessing Specified Web Sites .............................................. 6-11

Contents
HUAWEI HG256s
User Guide
ii Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
7 Maintenance Guide .............................................................................................. 7-1
7.1 Changing the Password of the Web-based Configuration Utility................................ 7-1
7.2 Changing the Login IP Address of the Web-based Configuration Utility ................... 7-2
7.3 Restoring Default Settings........................................................................................... 7-3
8 FAQs........................................................................................................................ 8-1

HUAWEI HG256s
User Guide Figures
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
iii
Figures
Figure 3-1 Cable connections........................................................................................... 3-1
Figure 5-1 Network model of voice services.................................................................... 5-1
Figure 6-1 Home storage connection................................................................................ 6-8

HUAWEI HG256s
User Guide Tables
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
v
Tables
Table 2-1 Interfaces and buttons of the HG256s............................................................... 2-1
Table 2-2 Indicators of the HG256s.................................................................................. 2-2
Table 6-1 Rules for setting the password used for accessing a WLAN............................. 6-4

HUAWEI HG256s
User Guide 1 Warnings and Precautions
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
1-1
1 Warnings and Precautions
To use the device properly and safely, read these warnings and precautions carefully and
strictly observe them during operation. Unless otherwise specified, the term "device"
e and its accessories.
Basic R
zWhen using the device, observe all applicable laws and regulations and respect the
Enviro
z
ring
appliances that generate strong magnetic or
zevice in a cool and well-ventilated indoor area. Do not expose the device
z
liquid enters the device, stop using the device immediately, power it
zDuring thunderstorms, power off the device, and then remove all the cables
connected to it to prevent it from getting damaged due to lightning strikes.
refers to the devic
equirements
zDuring storage, transportation, and operation of the device, keep it dry and prevent it
from colliding with other objects.
zDo not dismantle the device. In case of any fault, contact an authorized service center
for assistance or repair.
zWithout authorization, no organization or individual can change the mechanical,
safety, or performance design of the device.
legal rights of other people.
nmental Requirements for Using the Device
Before connecting and disconnecting cables, stop using the device, and then
disconnect it from the power supply. Ensure that your hands are dry du
operation.
zKeep the device far from sources of heat and fire, such as a heater or a candle.
zKeep the device far from electronic
electric fields, such as a microwave oven or a refrigerator.
zPlace the device on a stable surface.
Place the d
to direct sunlight. Use the device in an area with a temperature ranging from 0°C to
40°C.
zDo not block the openings on the device with any object. Reserve a minimum space
of 10 cm around the device for heat dissipation.
Do not place any object (such as a candle or a water container) on the device. If any
foreign object or
off, remove all the cables connected to it, and then contact an authorized service
center.

1 Warnings and Precautions
HUAWEI HG256s
User Guide
1-2 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Precau
z
z
z
zce into operating rooms, intensive care units (ICUs), or coronary
Areas w
z
or fires may occur. In
zor transport the device in the same box as inflammable liquids, gases, or
Access
z
z
zpower adapter meets the specifications indicated on the device
z
/EN60950-1 and it is tested and approved according to national or local
Safety
ay
all
ice, causing suffocation or other dangerous situations.
Mainte
z
z
tions for Using Wireless Devices
The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons.
Do not use the device where using wireless devices is prohibited or may cause
interference or danger.
The radio waves generated by the device may interfere with the operation of
electronic medical devices. If you are using any electrical medical device, contact its
manufacturer for the restrictions on the use of the device.
Do not take the devi
care units (CCUs).
ith Inflammables and Explosives
Do not use the device where inflammables or explosives are stored, for example, in a
gas station, oil depot, or chemical plant. Otherwise, explosions
addition, follow the instructions indicated in text or symbols.
Do not store
explosives.
ory Requirements
Use only the accessories supplied or authorized by the device manufacturer.
Otherwise, the performance of the device may get affected, the warranty for the
device or the laws and regulations related to telecommunications terminals may
become null and void, or an injury may occur.
Do not use the power adapter if its cable is damaged. Otherwise, electric shocks or
fires may occur.
Ensure that the
nameplate.
Ensure that the power adapter meets the requirements of Clause 2.5 in
IEC60950-1
standards.
of Children
Keep the device and its accessories out of the reach of children. Otherwise, they m
damage the device and its accessories by mistake, or they may swallow the sm
components of the dev
nance
If the device is not used for a long time, power it off, and then remove all the cables
connected to it.
If any exception occurs, for example, if the device emits any smoke or unusual sound
or smell, stop using the device immediately, power it off, remove all the cables
connected to it, and then contact an authorized service center.

HUAWEI HG256s
User Guide 1 Warnings and Precautions
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
1-3
ion of the device.
zUse a clean, soft, and dry cloth to clean the device shell. Do not use any cleaning
agent or spray to clean the device shell.
zDo not trample, pull, or overbend any cable. Otherwise, the cable may get damaged,
causing malfunct
zBefore cleaning the device, stop using it, power it off, and then remove all the cables
connected to it.

HUAWEI HG256s
User Guide 2 Product Overview
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
2-1
2 Product Overview
2.1 Pr
s a
terfaces through which you can connect various home
terminal devices, such as personal computers (PCs) and Internet Protocol (IP) set-top
boxes (STBs), to the Internet.
2.2.1 In
Table 2-1
Tbut 56s
oduct Features
The HUAWEI HG256s home gateway (hereinafter referred to as the HG256s) provide
user-friendly GUI, complemented by a fresh and unique appearance. On the network
side, it provides a high-speed Gigabit Ethernet (GE) interface for wide area network
(WAN) access. On the user side, it supports the wireless local area network (WLAN)
function and provides four GE in
2.2 Hardware
terfaces and Buttons
describes the interfaces and buttons of the HG256s.
able 2-1 Interfaces and tons of the HG2
Interface or Button Description
POWER Interface used to connect the power adapter to the
HG256s.
RESET f the HG256s, power on
ess and hold the RESET button for at least
release the button.
N
To restore the factory settings o
the HG256s, pr
3s, and then
OTE
When the factory settings are restored, your custom data is
lost. Therefore, use the RESET button with caution.
LAN1–LAN4 Ethernet interfaces used to connect Ethernet devices,
such as PCs, to the HG256s.
PHONE1, PHONE2 It is used to connect the phone to the HG256s.
WAN Ethernet interface used to connect Etherne
provide Internet access interfaces.
t devices that
WPS Button used to enable the WPS function.
WLAN It is used to enable or disable the WLAN function.
ON/OFF It is used to power on or off the HG256s.

2 Product Overview
HUAWEI HG256s
User Guide
2-2 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
WPS is a standard for easy and secure establishment of a WLAN. Through the WPS function,
you can access a WLAN on your wireless terminal devices securely without entering the name
and password of the WLAN.
2.2.2 Indicators
Table 2-2 describes the indicators of the HG256s.
Table 2-2 Indicators of the HG256s
Indicator Color
Status Indicates
Green On The HG256s is powered on.POWER
- Off The HG256s is powered off.
Green On A connection is set up between the Internet
and the WAN interface of the HG256s, but no
data is being transmitted on the WAN
interface.
Red On A physical connection is set up, but the
HG256s is not connected to the Internet.
INTERNET
- Off No network cable is connected to the WAN
interface, or the HG256s is powered off.
Green Blinking The WLAN function is enabled and data is
being transmitted on the WLAN.
Green On The WLAN function is enabled, but no data is
being transmitted on the WLAN.
WLAN
- Off The WLAN function is disabled.
Green On The HG256s is successfully registered with
the SIP server.
Green Blinking The corresponding phone is picked up.
VOIP1,
VOIP2
- Off The HG256s is powered off or fails to be
registered with the SIP server.

HUAWEI HG256s
User Guide 2 Product Overview
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
2-3
Indicator Color
Status Indicates
Green Blinking A connection is set up between the
corresponding LAN interface of the HG256s
and an Ethernet device (such as a PC) through
a network cable and data is being transmitted.
Green On A connection is set up between the
corresponding LAN interface of the HG256s
and an Ethernet device (such as a PC) through
a network cable, but no data is being
transmitted.
LAN1,
LAN2,
LAN3,
LAN4
- Off No connection is set up between the
corresponding LAN interface of the HG256s
and an Ethernet device (such as a PC).
Green Blinking The USB connection is successfully
established and data is being transmitted.
Green On The USB connection is successfully
established but no data is being transmitted.
USB
- Off The HG256s is powered off or the USB
connection is not yet established.

HUAWEI HG256s
User Guide 3 Hardware Installation and Quick Start
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
3-1
3 Hardware Installation and Quick Start
3.1 Se
the
of the HG256s, you also need to pay attention to the following
z
e HG256s. Otherwise, the transmission
zliances (such as a
microwave oven) that generate strong magnetic or electric fields.
3.2 Knowing Cable Connections
Figure 3-1 ections.
lecting a Position for the HG256s
Place the HG256s in a stable and well-ventilated place and do not expose it to direct
sunlight, as described in chapter 1 "Warnings and Precaution." If you want to use
WLAN function
precautions for a better performance of the WLAN:
Place the HG256s in an open space and ensure that no obstacle, such as a cement or
wooden wall, exists between your PC and th
of radio signals on the WLAN is affected.
Ensure that the HG256s and your PC are far from the electric app
shows the cable conn
Figure 3-1 Cable connections
on the wall C
4 Set-top box 5 Power adapter
1 Network jack 2 Phone 3 P

3 Hardware Installation and Quick Start
HUAWEI HG256s
User Guide
3-2 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
3.3 Powering On the HG256s
To power on the HG256s, finish the cable connections and press the ON/OFF button on
the side panel of the HG256s. After you power on the HG256s, if the HG256s works
properly, the indicators on the front panel turn on. HG256s works properly according to
the descriptions in Table 2-2.
3.4 Logging In to the Web-Based Configuration Utility
The HG256s provides an easy-to-use Web-based configuration utility. You can view and
set the parameters of the HG256s through this utility.
To log in to the Web-based configuration utility, do as follows:
Step 1 Set the network connection of your PC and ensure that your PC obtains an IP address
automatically.
By default, the DHCP function of the HG256s is enabled. In this case, the HG256s assigns an
IP address to your PC automatically and you do not need to configure the IP address of your
PC.
Step 2 Start the Internet Explorer on your PC and ensure that the Internet Explorer does not use
any proxy server.
Take the Internet Explorer 6.0 as an example. To ensure that the Internet Explorer does
not use any proxy server, do as follows:
1. Start the Internet Explorer. Choose Tools > Internet Options.
2. On the Connect tab of the Internet Options dialog box, click LAN Settings.
3. In the Proxy Server area, ensure that Use the proxy server for LAN is cleared. If
Use the proxy server for LAN is selected, clear Use the proxy server for LAN,
and then click OK.
Step 3 In the address bar of the Internet Explorer, enter http://192.168.1.1, and then press
Enter.
Step 4 In the Login dialog box, enter the user account (admin by default) and the password
(admin by default), and then click OK.
----End

HUAWEI HG256s
User Guide 4 Configuration of WLAN Parameters
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
4-1
4 Configuration of WLAN Parameters
4.1 Se
re preset before delivery. Therefore, you can use
e the WLAN settings, see section 6.2
"Improving the Security of a WLAN".
4.2 Se
C and the HG256s manually. To
owing methods:
z
runs on Windows XP, you can use the Wireless Zero Configuration that is
xample, to set up a wireless connection between your PC and
ws:
Step 1
tting the WLAN Parameters of the Router
The HG256s provides the WLAN function. If a wireless network adapter is installed on
your PC, you can connect your PC to the HG256s in the wireless manner.
The WLAN parameters of the HG256s a
the settings directly. If you want to chang
tting Up a Wireless Connection Manually
You can set up a wireless connection between your P
manually set up a wireless connection, use either of the foll
zUse the tool provided by your network adapter.
For details, see the user guide of your network adapter.
Use the wireless configuration software provided by the operating system of your
PC.
If your PC
provided by Windows XP to set up a wireless connection between your PC and the
HG256s.
Takes Windows XP as an e
the HG256s manually, do as follo
Record the WLAN name.
The WLAN name (SSID) of the HG256s is preset before delivery. You c
label on the rear panel of the HG256s.
an find it from the
Step 2
3. s listed in the right pane of the Computer Management window,
Enable the wireless configuration service provided by Windows XP.
1. Right-click My Computer, and then choose Manage from the shortcut menu.
2. In the Computer Management window, choose Computer Management (Local)
> Services and Applications > Services.
From the service
right-click Wireless Zero Configuration, and then choose Properties from the
shortcut menu.
4. In the Wireless Zero Configuration Properties (Local Computer) dialog box,
check whether Service status is Started. If not, click Start.

4 Configuration of WLAN Parameters
HUAWEI HG256s
User Guide
4-2 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Step 3
1. > Network
2. ork Connections window, right-click Wireless Network Connection,
ection Properties dialog box, select Wireless
4.
5.
n click
AN list,
that a wireless connection is set up between you PC and the HG256s.
e the Wireless Network Connection dialog box.
8. In the Wireless Network Connection Properties dialog box, click OK.
----End
5. Click OK to close the dialog box, and then close the Computer Management
window.
Configure the wireless network connection on your computer.
Choose Start > All Programs > Accessories > Communications
Connections.
In the Netw
and then choose Properties from the shortcut menu.
3. In the Wireless Network Conn
Networks.
Select Use Windows to configure my wireless network settings.
Click View Wireless Networks.
6. In the Wireless Network Connection dialog box, select the WLAN with the same
name as the WLAN name that you have recorded from the WLAN list, and the
Connect in the lower right corner of the dialog box.
Connected is displayed in the upper right corner of the WLAN icon in the WL
indicating
7. Clos

HUAWEI HG256s
User Guide 4 Configuration of WLAN Parameters
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
4-3
4.3 Setting Up a Wireless Connection by the WPS
Button
The HG256s supports the WPS function. If your network adapter also supports the WPS
function, you can use the WPS function to set up a wireless connection between your PC
and the HG256s quickly. To set up a wireless connection, do as follows:
Step 1 Set the WLAN parameters of HG256s, and then set the Security Mode to WPA-PSK,
WPA2-PSK or WPA-PSK/WPA2-PSK as prompted. For details, see section 6.2.3
"Using Secure Encryption".
The WPS function can be used only when the security mode of the WLAN is set to WPA-PSK,
WPA2-PSK, or WPA-PSK/WPA2-PSK.
Step 2 Press the WPS button of the HG256s to enable the HG256s to enter the WPS negotiation
state.
The WLAN indicator of the HG256s blinks. If the WLAN indicator does not blink, it
indicates that the WPS function cannot be enabled. For the solutions to other WPS
problems, see chapter 8 "FAQs".
Step 3 Enable the WPS negotiation function of the wireless network adapter on your PC within
two minutes, and then wait for a moment (typically 10s).
The WLAN indicator of the HG256s becomes on from the blinking state, indicating that
the HG256s is connected to your PC through the WLAN.
----End

HUAWEI HG256s
User Guide 5 Configuration of VoIP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
5-1
5 Configuration of VoIP
The HG256s supports voice services based on the Session Initiation Protocol (SIP).
The SIP is an application layer protocol used to create, modify, or end multimedia
sessions.
5.1 Networking
Figure 5-1 Network model of voice services
Equipment Description
Proxy Server A server that forwards requests or responses in place of the client
Registrar Server questsA server that receives registration re
BRAS Broadband Remote Access Server

5 Configuration of VoIP
HUAWEI HG256s
User Guide
5-2 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
5.2 Configuration Introduction
The VoIP parameter has been configured with the delivered HG256s. In general, this
parameter does not need to be configured and please keep the default settings.