Huawei USG6000 Series Installation instructions

15333 Avenue of Science, Suite 100
San Diego, CA 92128
Give us a call:
1-855-881-2004
Send us an email:
[email protected]
For more info, visit us at:
www.edgewave.com
Hardware Guide
USG6000 Unified Security Gateway
V100R001
EPIC Next Generation Firewall

Issue 03 (2015-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
i
Copyright © EdgeWave 2015. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of EdgeWave.
Notice
The purchased products, services and features are stipulated by the contract made between EdgeWave
and the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
EdgeWave
Address:
15333 Avenue of Science, Suite 100
San Diego, CA 92128
Website:
http://www.edgewave.com

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
About This Document
Issue 03 (2015-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co.,
Ltd.EdgeWave
ii
About This Document
Related Version
The following table lists the product version related to this document.
Product Name
Version
The USG6000 series has the
following models:
USG6300
−USG6310
−USG6320
−USG6330
−USG6350
−USG6360
−USG6370
−USG6380
−USG6390
USG6500
−USG6530
−USG6550
−USG6570
USG6600
−USG6620
−USG6630
−USG6650
−USG6660
−USG6670
−USG6680
V100R001C20SPC700
Intended Audience
This document describes hardware structure, installation guide, and hardware maintenance.
The content of this document includes the appearance and specifications of the product, the

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
About This Document
Issue 03 (2015-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co.,
Ltd.EdgeWave
iii
supported expansion cards, preparation before the installation, installation, cabling, and
hardware replacement.
This document is intended for installation personnel and administrators who install and
maintain USG. The installation personnel or administrators must have experience in the
installation and maintenance of networking devices.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to personal
injury.
Calls attention to important information, best practices and
tips.
NOTE is used to address information not related to
personal injury, equipment damage, and environment
deterioration.
Command Conventions
The command conventions that may be found in this document are defined as follows.
Convention
Description
Boldface
The keywords of a command line are in boldface.
Italic
Command arguments are in italics.
[ ]
Items (keywords or arguments) in brackets [ ] are optional.
{ x | y | ... }
Optional items are grouped in braces and separated by
vertical bars. One item is selected.

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
About This Document
Issue 03 (2015-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co.,
Ltd.EdgeWave
iv
Convention
Description
[ x | y | ... ]
Optional items are grouped in brackets and separated by
vertical bars. One item is selected or no item is selected.
{ x | y | ... } *
Optional items are grouped in braces and separated by
vertical bars. A minimum of one item or a maximum of all
items can be selected.
[ x | y | ... ] *
Optional items are grouped in brackets and separated by
vertical bars. Several items or no item can be selected.
&<1-n>
The parameter before the & sign can be repeated 1 to n
times.
#
A line starting with the # sign is comments.
GUI Conventions
The GUI conventions that may be found in this document are defined as follows.
Convention
Description
Boldface
Buttons, menus, parameters, tabs, window, and dialog titles
are in boldface. For example, click OK.
>
Multi-level menus are in boldface and separated by the ">"
signs. For example, choose File > Create > Folder.
Update History
Updates between document issues are cumulative. Therefore, the latest document issue
contains all updates made in previous issues.
Updates in Issue 03 (2015-01-26) of Product Version V100R001C20SPC700
The third commercial release has the following updates:
The AC power module of the USG6680 is increased from 350 W to 700 W. For details,
see USG6680 Hardware Overview.
The 1 U device (USG6330/6350/6360/6370/6380/6390/6530/6550/6570/6620/6630) and
3 U device (USG6650/6660/6670/6680) can be mounted in a 19-inch standard cabinet
through adjustable guide rails. For details, see Mounting a 1 U Device in a Cabinet and
Mounting a 3 U Device in a Cabinet.
Updates in Issue 02 (2014-10-20) of Product Version V100R001C20SPC200
The second commercial release has the following updates.

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
About This Document
Issue 03 (2015-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co.,
Ltd.EdgeWave
v
The following hardware models are added based on V100R001C10:
1.1.1 USG6310
1.1.3 USG6330/6350/6360
1.2.1 USG6530
1.3.1 USG6620/6630
Updates in Issue 01 (2014-06-13) of Product Version V100R001C10SPC100
Initial commercial release.

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
Contents
Issue 03 (2015-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
vi
Contents
About This Document.................................................................................................................... ii
1 Hardware Overview .....................................................................................................................1
1.1 USG6300 Product Series ..............................................................................................................................................2
1.1.1 USG6310 ...................................................................................................................................................................2
1.1.1.1 Device Overview ....................................................................................................................................................2
1.1.1.2 Front Panel..............................................................................................................................................................2
1.1.1.3 Rear Panel...............................................................................................................................................................3
1.1.1.4 Power Supply System.............................................................................................................................................5
1.1.1.5 Heat Dissipation System.........................................................................................................................................6
1.1.1.6 Technical Specifications .........................................................................................................................................7
1.1.2 USG6320 ...................................................................................................................................................................8
1.1.2.1 Device Overview ....................................................................................................................................................9
1.1.2.2 Front Panel..............................................................................................................................................................9
1.1.2.3 Rear Panel.............................................................................................................................................................10
1.1.2.4 Power Supply System...........................................................................................................................................12
1.1.2.5 Heat Dissipation System.......................................................................................................................................13
1.1.2.6 Technical Specifications .......................................................................................................................................14
1.1.3 USG6330/6350/6360...............................................................................................................................................16
1.1.3.1 Device Overview ..................................................................................................................................................16
1.1.3.2 Front Panel............................................................................................................................................................18
1.1.3.3 Rear Panel.............................................................................................................................................................22
1.1.3.4 Power Supply System...........................................................................................................................................23
1.1.3.5 Heat Dissipation System.......................................................................................................................................28
1.1.3.6 Technical Specifications .......................................................................................................................................29
1.1.4 USG6370/6380/6390...............................................................................................................................................31
1.1.4.1 Device Overview ..................................................................................................................................................31
1.1.4.2 Front Panel............................................................................................................................................................33
1.1.4.3 Rear Panel.............................................................................................................................................................37
1.1.4.4 Power Supply System...........................................................................................................................................38
1.1.4.5 Heat Dissipation System.......................................................................................................................................41
1.1.4.6 Technical Specifications .......................................................................................................................................41
1.2 USG6500 Product Series ............................................................................................................................................43

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
Contents
Issue 03 (2015-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
vii
1.2.1 USG6530 .................................................................................................................................................................44
1.2.1.1 Device Overview ..................................................................................................................................................44
1.2.1.2 Front Panel............................................................................................................................................................46
1.2.1.3 Rear Panel.............................................................................................................................................................50
1.2.1.4 Power Supply System...........................................................................................................................................51
1.2.1.5 Heat Dissipation System.......................................................................................................................................56
1.2.1.6 Technical Specifications .......................................................................................................................................57
1.2.2 USG6550/6570........................................................................................................................................................59
1.2.2.1 Device Overview ..................................................................................................................................................59
1.2.2.2 Front Panel............................................................................................................................................................61
1.2.2.3 Rear Panel.............................................................................................................................................................65
1.2.2.4 Power Supply System...........................................................................................................................................66
1.2.2.5 Heat Dissipation System.......................................................................................................................................69
1.2.2.6 Technical Specifications .......................................................................................................................................69
1.3 USG6600 Product Series ............................................................................................................................................71
1.3.1 USG6620/6630 ........................................................................................................................................................72
1.3.1.1 Device Overview ..................................................................................................................................................72
1.3.1.2 Front Panel............................................................................................................................................................74
1.3.1.3 Rear Panel.............................................................................................................................................................78
1.3.1.4 Power Supply System...........................................................................................................................................79
1.3.1.5 Heat Dissipation System.......................................................................................................................................82
1.3.1.6 Technical Specifications .......................................................................................................................................82
1.3.2 USG6650/6660........................................................................................................................................................84
1.3.2.1 Device Overview ..................................................................................................................................................85
1.3.2.2 Front Panel............................................................................................................................................................88
1.3.2.3 Rear Panel.............................................................................................................................................................90
1.3.2.4 Power Supply System...........................................................................................................................................95
1.3.2.5 Heat Dissipation System.....................................................................................................................................100
1.3.2.6 Technical Specifications .....................................................................................................................................103
1.3.3 USG6670 ...............................................................................................................................................................105
1.3.3.1 Device Overview ................................................................................................................................................105
1.3.3.2 Front Panel..........................................................................................................................................................108
1.3.3.3 Rear Panel........................................................................................................................................................... 110
1.3.3.4 Power Supply System.........................................................................................................................................115
1.3.3.5 Heat Dissipation System.....................................................................................................................................120
1.3.3.6 Technical Specifications .....................................................................................................................................123
1.3.4 USG6680 ...............................................................................................................................................................125
1.3.4.1 Device Overview ................................................................................................................................................125
1.3.4.2 Front Panel..........................................................................................................................................................128
1.3.4.3 Rear Panel...........................................................................................................................................................130
1.3.4.4 Power Supply System.........................................................................................................................................137
1.3.4.5 Heat Dissipation System.....................................................................................................................................141

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
Contents
Issue 03 (2015-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
viii
1.3.4.6 Technical Specifications .....................................................................................................................................144
1.4 Expansion Card.........................................................................................................................................................146
1.4.1 8GE WSIC Interface Card .....................................................................................................................................147
1.4.2 2XG8GE WSIC Interface Card .............................................................................................................................148
1.4.3 8GEF WSIC Interface Card...................................................................................................................................150
1.4.4 4GE-BYPASS WSIC Card ....................................................................................................................................151
1.5 Hard Disk..................................................................................................................................................................154
1.5.1 Hard Disk Unit SM-HDD-SAS300G-A ................................................................................................................154
1.5.2 Hard Disk Combination SM-HDD-SAS300G-B...................................................................................................155
2 Hardware Installation ..............................................................................................................158
2.1 Installation Preparation.............................................................................................................................................158
2.1.1 Precautions.............................................................................................................................................................158
2.1.2 Installation Environment Check ............................................................................................................................159
2.1.3 Instruments Required for the Installation...............................................................................................................160
2.2 Installing a Desktop Device (USG6310/6320) .........................................................................................................161
2.2.1 Mounting a Device to a Specified Location...........................................................................................................161
2.2.1.1 Mounting a Device in a Cabinet .........................................................................................................................161
2.2.1.2 Mounting a Device on a Workbench...................................................................................................................165
2.2.1.3 Mounting a Device Against a Wall .....................................................................................................................166
2.2.2 Connecting a PGND Cable....................................................................................................................................169
2.2.3 Connecting a Console Cable..................................................................................................................................170
2.2.4 Connecting an Ethernet Cable ...............................................................................................................................173
2.2.5 Connecting a Power Adapter .................................................................................................................................175
2.2.6 Powering On or Off the USG6310/6320................................................................................................................176
2.3 Installing a 1 U Device (USG6330/6350/6360/6370/6380/6390/6530/6550/6570/6620/6630) ...............................177
2.3.1 Mounting a Device to a Specified Location...........................................................................................................178
2.3.1.1 Mounting a Device in a Cabinet .........................................................................................................................178
2.3.1.2 Mounting a Device on a Workbench...................................................................................................................182
2.3.2 Connecting a PGND Cable....................................................................................................................................184
2.3.3 Installing an Expansion Card.................................................................................................................................185
2.3.4 Installing a Hard Disk Combination ......................................................................................................................187
2.3.5 Connecting a Console Cable..................................................................................................................................188
2.3.6 Connecting an Ethernet Cable ...............................................................................................................................191
2.3.7 Installing Optical Transceivers and Connecting Optical Fibers.............................................................................193
2.3.8 Connecting AC Power Cables................................................................................................................................195
2.3.9 Powering On or Off the USG6330/6350/6360/6370/6380/6390/6530/6550/6570/6620/6630 ..............................196
2.4 Installing a 3 U Device (USG6650/6660/6670/6680)...............................................................................................198
2.4.1 Mounting a Device in a Cabinet ............................................................................................................................198
2.4.2 Connecting a PGND Cable....................................................................................................................................203
2.4.3 Installing an Expansion Card.................................................................................................................................204
2.4.4 Installing Hard Disk Units.....................................................................................................................................207

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
Contents
Issue 03 (2015-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ix
2.4.5 Connecting a Console Cable..................................................................................................................................210
2.4.6 Connecting an Ethernet Cable ...............................................................................................................................214
2.4.7 Installing Optical Transceivers and Connecting Optical Fibers.............................................................................215
2.4.8 Connecting Power Cables......................................................................................................................................218
2.4.8.1 Connecting AC Power Cables.............................................................................................................................218
2.4.8.2 Connecting DC Power Cables ............................................................................................................................219
2.4.9 Powering On or Off the USG6650/6660/6670/6680..............................................................................................222
3 Maintaining the Hardware......................................................................................................226
3.1 Replacing an Expansion Card...................................................................................................................................226
3.2 Replacing/Adding a Hard Disk.................................................................................................................................230
3.3 Replacing a Power Module.......................................................................................................................................234
3.4 Replacing a Fan Module...........................................................................................................................................240
A Appendix ...................................................................................................................................244
A.1 Cable........................................................................................................................................................................244
A.1.1 PGND Cable .........................................................................................................................................................244
A.1.2 AC Power Cables..................................................................................................................................................247
A.1.3 DC Power Cables..................................................................................................................................................248
A.1.4 Console Cable.......................................................................................................................................................250
A.1.5 USB Configuration Cable.....................................................................................................................................252
A.1.6 Ethernet Cable.......................................................................................................................................................253
A.1.7 Optical Fiber .........................................................................................................................................................257
A.2 Optical Transceiver..................................................................................................................................................260
A.3 Requirements for Installation Environment.............................................................................................................262
A.3.1 Device Position.....................................................................................................................................................262
A.3.2 Humidity, Temperature, and Cleanness.................................................................................................................263
A.3.3 ESD Requirements................................................................................................................................................264
A.3.4 Lightning Protection and Grounding ....................................................................................................................265
A.3.5 Power Supply........................................................................................................................................................268
A.3.6 Electromagnetic Protection...................................................................................................................................270

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
1 Hardware Overview
Issue 03 (2015-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1
1 Hardware Overview
About This Chapter
This chapter describes hardware information for all USG series, including hardware
appearance, front and real panels, power supply system, heat dissipation system, and technical
specifications.
1.1 USG6300 Product Series
The USG6300 product series includes USG6310/6320/6330/6350/6360/6370/6380/6390.
These models are 1 U devices with an integrated structure and fit into a 19-inch standard
cabinet.A larger model number indicates a higher performance.
1.2 USG6500 Product Series
The USG6500 product series includes USG6530/6550/6570. These models are 1 U devices
with an integrated structure and fit into a 19-inch standard cabinet. A larger model number
indicates a higher performance.
1.3 USG6600 Product Series
The USG6600 product series includes USG6620/6630/6650/6660/6670/6680. The USG6600
uses an integrated structure design and fits into a 19-inch standard cabinet. USG6620/6630
has the same appearance and are all 1U devices. USG6650/6660/6670/6680 has the same
appearance and are all 3U devices, but they have different standard expansion cards.A larger
model number in the USG6600 series indicates a higher performance.
1.4 Expansion Card
The USG supports multiple types of expansion cards, which increase the number of interfaces,
and bypass cards, which provide enhanced reliability.
1.5 Hard Disk
Hard disks store log and report data. Different models support different types of hard disk
modules.

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
1 Hardware Overview
Issue 03 (2015-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2
1.1 USG6300 Product Series
The USG6300 product series includes USG6310/6320/6330/6350/6360/6370/6380/6390.
These models are 1 U devices with an integrated structure and fit into a 19-inch standard
cabinet.A larger model number indicates a higher performance.
1.1.1 USG6310
The USG6310 is a 1-U desktop device that provides fixed ports and does not support
expansion.
1.1.1.1 Device Overview
The USG6310 is a 1-U desktop device with an integrated structure. The device provides fixed
ports, a built-in fan module, and uses an external power adapter to supply power. The device
does not support port expansion.
Appearance
Figure 1-1 illustrates the appearance of the USG6310.
Figure 1-1 Appearance of USG6310
Ports
The USG6310 provides the following fixed ports:
1 console port (RJ45)
1 USB 2.0 port
8 10/100/1000M autosensing Ethernet electrical ports
1.1.1.2 Front Panel
The USG6310 front panel provides a USB 2.0 port and system and port status indicators.
Figure 1-2 illustrates the front panel of the USG6310.

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
1 Hardware Overview
Issue 03 (2015-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3
Figure 1-2 USG6310 front panel
Name
Description
USB 2.0 port
USB ports allow you to insert USB devices for system software
upgrades. For details on upgrades through USB devices, refer to the
Upgrade Guide delivered with the device.
Interface status
indicators 0 to 7
(green)
Steady on: The link is connected.
Blink eight times every second (8 Hz): Data is being sent or
received.
Off: The link is disconnected.
System status indicators
PWR indicator
(green)
Steady on: The power module works properly.
Off: The power module is faulty or the power cable is disconnected.
SYS indicator
(green)
Steady on: The system is powering on or restarting.
Blink every two seconds (0.5 Hz): The system is running normally.
Blink twice every second (2 Hz): The system is starting.
Blink eight times every second (8 Hz): The system software or
configuration file is being upgraded.
Off: The system is faulty.
ALM indicator
(red)
Steady on: The system is faulty. For example, the power-on self test
(POST), power voltage, or temperature is abnormal.
Off: The system is running normally.
USB indicator
(green)
Steady on: The USB 2.0 port is connected.
Off: The USB 2.0 port is disconnected.
1.1.1.3 Rear Panel
The rear panel of the USG6310 provides fixed ports, a protective ground terminal, RST
button, and power socket.

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
1 Hardware Overview
Issue 03 (2015-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4
Figure 1-3 illustrates the rear panel of the USG6310.
Figure 1-3 USG6310 Rear Panel
Name
Description
Console port (RJ45)
Console ports allow you to locally connect to the device.
You can use a console cable to connect the console port (RJ45)
on the device to the COM port on your PC and use a serial port
terminal program on your PC to access, configure, and manage
the device.
ESN
The serial number that uniquely identifies the device. When
applying for a license file, you must provide the ESN of the
device.
0 to 7 (RJ45)
8 10/100/1000M autosensing Ethernet electrical ports,
numbered from GigabitEthernet 0/0/0 to GigabitEthernet 0/0/7.
GigabitEthernet 0/0/0 is an inband management port and its
default IP address is 192.168.0.1. After this port is connected
to your PC through network cables, you can log in to the
device using Telnet, STelnet, or web UI to configure or
manage the device.
RST button
To restart the device, press the RST button. Ensure that the
running configuration is saved before pressing the RST button.
The RST button can also be used to restore the default settings.
To do so, press and hold down the RST button and power on
the device. Three to five seconds later, when the SYS and
ALM indicators on the front panel are both blinking, release
the RST button to restore the default settings.
Protective ground
The M4 OT terminal connects the PGND cable to the ground

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
1 Hardware Overview
Issue 03 (2015-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5
Name
Description
terminal
point of the cabinet, workbench, or wall, or the ground bar in
an equipment room.
Power receptacle
Connects to the 4-pin plug of the power adapter.
Clip hole
The hole is used to install the power cable clip, which is used
to bind and fix the power cable.
1.1.1.4 Power Supply System
The USG6310 does not have a built-in power module and requires an external power adapter.
36W Power Adapter
The 36W power adapter converts AC power to DC power for the device. Figure 1-4 illustrates
the appearance of the power adapter.
Figure 1-4 Appearance of the 36W power adapter
Table 1-1 lists the functions of the 36W power adapter.
Table 1-1 Functions of the 36W power adapter
Item
Description
Input overcurrent
protection
Stops power output and does not automatically restore power
output after the input current becomes normal.
Output current limiting
protection
Intermittently provides output and automatically restores
normal output after the output current falls within a normal
range.
Output overvoltage
protection
Intermittently stops output and automatically restores output
after the overvoltage condition is removed.
Output short circuit
Intermittently provides output and automatically restores

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
1 Hardware Overview
Issue 03 (2015-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6
Item
Description
protection
normal output after the output short circuit is removed.
Heat dissipation
The power adapter does not have fans and uses natural cooling.
Table 1-2 lists the technical specifications of the 36W power adapter.
Table 1-2 Technical specifications of the 36W power adapter
Item
Description
Dimensions (H x W x D)
32 mm x 53.95 mm x 99.45 mm
Weight
0.22 kg
Input
Rated input voltage range
100 V AC to 240 V AC (50 Hz/60 Hz)
Maximum input voltage
range
90 V AC to 264 V AC (47 Hz to 63 Hz)
Maximum input current
1.0 A
Output
Rated output voltage
12 V DC
Maximum output voltage
range
11.4 V DC to 12.6 V DC
Maximum output current
3 A
Maximum output power
36 W
1.1.1.5 Heat Dissipation System
The USG6310 has a built-in fan module for heat dissipation.
The device provides a left-to-right air flow, as shown in Figure 1-5. The built-in fan module
locates at the air exhaust and cannot be removed.

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
1 Hardware Overview
Issue 03 (2015-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7
Figure 1-5 System air flow
1.1.1.6 Technical Specifications
This section describes the dimensions, weight, and power and environment specifications of
the USG6310.
Table 1-3 lists the technical specifications of the USG6310.
Table 1-3 USG6310 Technical Specifications
Item
Description
System specifications
CPU
Multi-core 1.0 GHz processor
Memory
DDR3 2 GB
Flash
16 MB
CF card
1 GB
Hard disk
Not supported
SPUB (the service engine)
Not supported
Dimensions and weight
Dimensions (Hbx Wax D)
44.5 mm x 300 mm x 220 mm
Weight
1.75 kg
Power specifications
AC power
Supported (external AC power adapter)
Rated input voltage (AC)
100 V to 240 V, 50 Hz/60 Hz
Maximum input voltage (AC)
90 V to 264 V, 47 Hz to 63 Hz
Maximum input current
1.0 A

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
1 Hardware Overview
Issue 03 (2015-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8
Item
Description
Maximum output power
36 W
Heat dissipation
Fan module
Built-in fan module, cannot be removed.
Air flow (hot air flow, viewed facing the
rear panel)
Left-to-right air flow
Port density
Console port
1 (RJ45)
USB 2.0 port
1
Mandatory service ports
8 10/100/1000M autosensing Ethernet
electrical ports
Expansion slot
None
Environment specificationsc
Short termdoperating temperature
–5°C to 55°C
Long term operating temperature
0°C to 40°C
Storage temperature
–40°C to 70°C
Operating relative humidity
Short term: 5% RH to 95% RH,
non-condensing
Long term: 5% RH to 95% RH,
non-condensing
Storage relative humidity
Short term: 5% RH to 95% RH,
non-condensing
Long term: 5% RH to 85% RH,
non-condensing
Altitude
5,000 m
NOTE
a. The width does not include the size of mounting ears.
b. The height is 1 U (1 U = 1.75 inches, or about 44.45 mm), which is a height unit defined in
International Electrotechnical Commission (IEC) 60297 standards.
c. Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the rack when
no protection plate exists before or after the rack.
d. The short term operating conditions mean that the continuous operating period does not exceed 48
hours and the accumulative total period within a year does not exceed 15 days. If the continuous
operating period exceeds 48 hours or the total period within a year exceeds 15 days, it is regarded as
long term.
1.1.2 USG6320
The USG6320 is a 1-U desktop device that provides fixed ports and does not support
expansion.

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
1 Hardware Overview
Issue 03 (2015-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9
1.1.2.1 Device Overview
The USG6320 is a 1-U desktop device with an integrated structure. The device provides fixed
ports, a built-in fan module, and uses an external power adapter to supply power. The device
does not support port expansion.
Appearance
Figure 1-6 illustrates the appearance of the USG6320.
Figure 1-6 Appearance of USG6320
Ports
The USG6320 provides the following fixed ports:
1 console port (RJ45)
1 USB 2.0 port
8 10/100/1000M autosensing Ethernet electrical ports
1.1.2.2 Front Panel
The USG6320 front panel provides a USB 2.0 port and system and port status indicators.
The front panel of the USG6320 is pictured in Figure 1-7.

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
1 Hardware Overview
Issue 03 (2015-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10
Figure 1-7 USG6320 front panel
Name
Description
USB 2.0 port
USB ports allow you to insert USB devices for system software
upgrades. For details on upgrades through USB devices, refer to the
Upgrade Guide delivered with the device.
Interface status
indicators 0 to 7
(green)
Steady on: The link is connected.
Blink eight times every second (8 Hz): Data is being sent or
received.
Off: The link is disconnected.
System status indicators
PWR indicator
(green)
Steady on: The power module works properly.
Off: The power module is faulty or the power cable is disconnected.
SYS indicator
(green)
Steady on: The system is powering on or restarting.
Blink every two seconds (0.5 Hz): The system is running normally.
Blink twice every second (2 Hz): The system is starting.
Blink eight times every second (8 Hz): The system software or
configuration file is being upgraded.
Off: The system is faulty.
ALM indicator
(red)
Steady on: The system is faulty. For example, the power-on self test
(POST), power voltage, or temperature is abnormal.
Off: The system is running normally.
USB indicator
(green)
Steady on: The USB 2.0 port is connected.
Off: The USB 2.0 port is disconnected.
1.1.2.3 Rear Panel
The rear panel of the USG6320 provides fixed ports, a protective ground terminal, RST
button, and power socket.