Huawei Honor Sport AM61 User manual

HUAWEI Sport Bluetooth Headphones
User Guide

contents
English ................................................................................... 1
French (Canada) ................................................................... 13
Warranty Card...................................................................... 26

English
1
Choosing your earplug
Choose the earplug that is most comfortable in your ear.
Wearing your headphone
Adjust the headphone so that it rests in a comfortable and secure position.

English
2
Power
To power on the headphone, press and hold the function button for 2 to 4
seconds.
To power off the headphone, press and hold the function button for over 4
seconds.

English
3
Pairing
Pairing with your phone for the first time
1.
Power on your headphone. It auto-enters Bluetooth pairing
mode, where the indicator blinks red and blue, and plays a voice alert.
2.
Enable Bluetooth on your phone and pair with the headphone.
Automatic reconnection after power-on
Power on the headphone. The headphone will automatically connect to the
recently-connected phone.
Re-pairing
1. Press and hold the function button for over 5 seconds to power on your
headphone and enter Bluetooth pairing mode. You will hear a voice
message instructing you to wait for the Bluetooth connection. The
red-blue indicator will blink.
2.
Enable Bluetooth on your phone and pair with the headphone.
The headphone will power off after 3 minutes if
it is not connected
to any phones in pairing mode.
Paring with two phones simultaneously
1.
Pair your headphone with the first phone.
2.
Power off your headphone.
3.
Press and hold the function button for over 5 seconds to power on your
headphone and enter Bluetooth pairing mode. Pair your
headphone with the second phone.
4.
Open the list of available Bluetooth devices in your first phone, and pair
your phone with your headphones.
When your headphone
is paired with two phones simultaneously,
only one phone can play music at a time. If you want to play music in
your second phone, pause the music playback in your first phone.

English
4
Reconnection after long-distance disconnection
After the headphone disconnects from your paired phones:

If you return to Bluetooth range within 10 minutes, the
connection will automatically resume.

If you return to Bluetooth range within 30 minutes, the connection
can be manually reconnected by pressing the function button.

If you do not return to Bluetooth range within 30 minutes, the
headphone will automatically power off.
Some phones cannot reconnect to the headphone
automatically due
to differences in Bluetooth technologies. Such concerns are not likely
to be a quality issue with your headphone.
Handling calls
For an incoming call:

To answer the call, press the function button.

To reject the call, press and hold the function button for 2 to 4
seconds.
During call:

To end the call, press the function button.

To switch between the phone and the headphone, press and hold
the function button for 2 to 4 seconds.

To mute or unmute a call, simultaneously press the volume up and
volume down buttons.

English
5
When there is a new incoming call during a call:

To end the current call and answer the new call, press the function
button.

To hold the current call and answer the new call, double-press the
function button.

To reject the new call, press and hold the function button for 2 to 4
seconds.
To cancel a call, press the function button.
To call back the last outgoing call, double-press the function button.
Music playback
To resume playback, press the function button.
During playback:

To pause playback, press the function button.

To increase volume, press the volume up button.

To decrease volume, press the volume down button.

To advance to the next audio track within a playlist, double-press
the function button.

To return to a previous track within a playlist, triple-press the
function button.

When you receive an incoming call during music playback, the
music pauses automatically. To answer the call, press the function
button. To end the call and resume playback, press the function
button again.
To help ensure music playback quality and connectivity, k
eep the
headphone close to your phone with as few obstacles as possible.

English
6
Magnetic Hall effect features
The backs of your headphone earpieces attract each other. Placing them in
this configuration allows the following functionality:

Answer an incoming call by separating the earpieces

End a call by attracting the earpieces.

Pause music playback by attracting the earpieces.

Resume playback after a call by attracting the earpieces.

Some third-party players may not support this feature.

Some third-
party players may start playback from the
beginning of the current music after attracting the earpieces.

English
7
Charging

During charging, the indicator is steady red.

When the headphone is fully charged, the indicator is steady blue.
If the headphone powers off due to insufficient battery level, charge
the headphone within 30 days. Otherwise, charging failure may
occur.

English
8
Safety information
Before you use the device, read the following precautions carefully to
ensure optimal performance and to avoid danger or violation of laws and
regulations.

Avoid dusty, damp, or dirty environments as well as strong
magnetic fields. Using the device in such environments may result
in circuit malfunctions.

Adjust the headphone volume to a proper range, as listening at
high volume for a long time may result to permanent hearing
impairment.

High volume during driving may cause distraction and car
accidents.

Do not wrap or seal the headphone, or place other materials on the
headphone. Do not use the headphone in a closed environment.

Keep your headphone away from fire or other heat sources, such as
electric heaters, microwave ovens, stoves, or water heaters. Avoid
using such devices to dry the headphone.

Protect your headphone and accessories from collision to avoid
battery explosion or device damage.

Use a clean, soft, and dry cloth to clean the headphone. Power off
the headphone before cleaning and maintenance.

Ideal operating temperatures range from 5°C to 35°C (40° to 90°F).
Ideal storage temperatures range from 5°C to 35°C (40° to 90°F).
Extreme heat or cold may damage the headphone. When the
temperature is lower than 5
℃ (40°F), the battery performance will
be affected.

Keep the headphone and accessories in a cool, well-ventilated area
away from direct sunlight.

Children should be supervised when using the headphone and its
accessories. The headphone and its accessories may contain small
components that may be damaged or present a choking hazard to
children. Please place them out of the reach of children.

Do not attempt to replace the battery. This device is equipped with
a built-in rechargeable battery that cannot be removed.

Do not dismantle the device or accessories. Such action voids
the warranty and releases the manufacturer from damage liability.

English
9
In case of device malfunction, please contact an authorized service
center.

Do not dispose of the headphone and its accessories in normal
household refuge. Dispose of or recycle your headphone and its
accessories according to local laws.

Do not use your device where prohibited. Follow rules and
regulations set forth by hospitals and health care facilities.

It is recommended that you keep a minimum distance of 15 cm
between a device and a pacemaker or artificial cochlea to prevent
potential interference.

Do not use unauthorized or incompatible power supplies, chargers,
or batteries to avoid hazards such as fire and explosion.
Disposal and recycling information
The crossed-out wheeled-bin symbol on your product,
battery, literature or packaging reminds you that all
electronic products and batteries must be taken to
separate waste collection points at the end of
their working lives; they must not be disposed of in the
normal waste stream with household garbage. It is the
responsibility of the user to dispose of the equipment using a designated
collection point or service for separate recycling of waste electrical and
electronic equipment (WEEE) and batteries according to local laws.
Proper collection and recycling of your equipment helps ensure electrical
and electronic equipment (EEE) waste is recycled in a manner that
conserves valuable materials and protects human health and the
environment, improper handling, accidental breakage, damage, and/or
improper recycling at the end of its life may be harmful for health and
environment. For more information about where and how to drop off your
EEE waste, please contact your local authorities, retailer or
household waste disposal service or visit the website
http://consumer.huawei.com/en/.
Reduction of hazardous substances
This device and any electrical accessories are compliant with local
applicable rules on the restriction of the use of certain hazardous

English
10
substances in electrical and electronic equipment, such as EU REACH, RoHS
and Batteries (where included) regulations, etc. For declarations of
conformity about REACH and RoHS, please visit our web site
http://consumer.huawei.com/certification.
EU regulatory conformance
Hereby, Huawei Technologies Co., Ltd. declares that this device is in
compliance with the essential requirements and other relevant provisions
of Directive 2014/53/EU.
The most recent, effective version of the DoC (declaration of conformity)
can be viewed at http://consumer.huawei.com/certification.
This device may be operated in all member states of the EU.
Observe national and local regulations where the device is used.
This device may be restricted for use, depending on the local network.
Frequency bands and power
(a) Frequency bands in which the radio equipment operates: Some bands
may not be available in all countries or all areas. Please contact the local
carrier for more details.
(b) Maximum radio-frequency power transmitted in the frequency bands
in which the radio equipment operates: The maximum power for all bands
is less than the highest limit value specified in the related Harmonized
Standard.
The frequency bands and transmitting power (radiated and/or conducted)
nominal limits applicable to this radio equipment are as follows
：
Bluetooth: 20 dBm.
Accessories and Software Information
It is recommended that the following accessories should be used:
Batteries: 1. VDL ( VDL1254 ) 2. VARTA ( CP1254 A3 )
The product software version is AM60_EN_1.1.0. Software updates will be
released by the manufacturer to fix bugs or enhance functions after the
product has been released. All software versions released by the
manufacturer have been verified and are still compliant with the related
rules.

English
11
All RF parameters (for example, frequency range and output power) are not
accessible to the user, and cannot be changed by the user.
For the most recent information about accessories and software, please see
the DoC (Declaration of Confirmation) at
http://consumer.huawei.com/certification.
Protecting your hearing when using a
headphone

To prevent possible hearing damage, do not listen at high
volume levels for long periods.

Using a headphone at high volumes may damage your hearing. To
reduce this risk, lower the headphone volume to a safe and
comfortable level.

Exposure to high volumes while driving may cause distraction and
increase your risk of an accident.
FCC statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect
the equipment into an outlet on a circuit different from that to which the
receiver is connected.

English
12
--Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Any changes or modifications to this device not expressly
approved by Huawei Technologies Co., Ltd. for compliance could void
the user's authority to operate the equipment.
IC statement:
This device complies with CAN ICES-3 (B)/NMB-3(B).
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation
of the device.
Legal statement
Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved.
This document is for reference only. Nothing in this guide constitutes
a warranty of any kind, express or implied.
Privacy protection
To understand how we protect your personal information, please visit
http://consumer.huawei.com/privacy-policy and read our privacy policy.
All pictures and illustrations in this guide, including but not limited to the
phone color, size, and display content, are for your reference only. The
actual product may vary. Nothing in this guide constitutes a warranty of any
kind, express or implied.

French (Canada)
13
Choisir vos coussinets
Choisissez les coussinets qui sont les plus confortables à porter au niveau de
vos oreilles.
Porter vos écouteurs
Ajuster les écouteurs afin qu'ils reposent au niveau de vos oreilles dans une
position qui soit à la fois confortable et sécuritaire.

French (Canada)
14
Alimentation
Pour mettre les écouteurs sous tension, appuyez sans relâcher sur le bouton
fonction pendant 2 à 4 secondes.
Pour mettre les écouteurs hors tension, appuyez sans relâcher sur le bouton
fonction pendant plus de 4 secondes.

French (Canada)
15
Appariement
Appariement avec votre téléphone pour la première fois
1.
Mettez vos écouteurs sous tension. Cela a pour effet d'activer le mode
d'appariement Bluetooth durant lequel le voyant clignote en rouge et
bleu et émet une alerte vocale.
2.
Activez Bluetooth sur votre téléphone et appariez-le avec les écouteurs.
Reconnexion automatique après la mise sous tension
Mettez les écouteurs sous tension. Les écouteurs se connecteront
automatiquement au téléphone récemment connecté.
Nouvel appariement
1. Appuyez sans relâcher sur le bouton fonction pendant plus de
5 secondes pour mettre vos écouteurs sous tension, puis activez le
mode d'appariement Bluetooth. Vous entendrez un message vocal vous
invitant à attendre l'activation de la connexion Bluetooth. Le voyant
rouge-bleu se mettra à clignoter.
2.
Activez Bluetooth sur votre téléphone et appariez-le avec les écouteurs.
Les écouteurs se me
ttront hors tension au bout de 3 minutes s'ils ne
sont pas connectés à des téléphones en mode d'appariement.
Appariement avec deux téléphones simultanément
1.
Appariez vos écouteurs avec le premier téléphone.
2.
Mettez vos écouteurs hors tension.
3.
Appuyez sans relâcher sur le bouton fonction pendant plus de 5 secondes
pour mettre vos écouteurs sous tension, puis activez le mode d'appariement
Bluetooth. Appariez vos écouteurs avec le second téléphone.
4.
Ouvrez la liste des périphériques Bluetooth disponibles sur votre
premier téléphone, puis appariez votre téléphone avec vos écouteurs.

French (Canada)
16
Lorsque vos écouteurs sont appariés avec deux téléphones
simultanément, seul l'un des deux téléphones peut restituer des
fichiers musicaux à la fois. Si vous souhaitez faire jouer des fichiers
musicaux dans votre deuxième téléphone, mettez la lecture de la
musique en pause sur votre premier téléphone.
Reconnexion après une déconnexion sur une longue distance
Une fois que les écouteurs se déconnectent de vos téléphones appariés :

Si vous revenez dans le rayon de portée Bluetooth dans les 10 minutes
qui suivent, la connexion sera automatiquement rétablie.

Si vous revenez dans le rayon de portée Bluetooth dans les
30 minutes qui suivent, la connexion pourra être rétablie
manuellement en appuyant sur le bouton fonction.

Si vous ne revenez pas dans le rayon de portée Bluetooth dans les
30 minutes qui suivent, les écouteurs se mettront automatiquement
hors tension.
Certains téléphones ne peuvent pas se reconnecter
automatiquement aux écouteurs en raison de différences dans les
technologies Bluetooth. De telles préoccupations ne sont pas
susceptibles d'affecter la qualité de vos écouteurs.
Gestion des appels
Pour un appel entrant :

Pour répondre à l'appel, appuyez sur le bouton fonction.

Pour rejeter l'appel, appuyez sans relâcher sur le bouton fonction
pendant 2 à 4 secondes.