Huawei AC6005 User manual

Huawei Access Controller AC6005 Ordering Guide Public
Huawei Access Controller AC6005 Ordering Guide
Product Overview
Huawei AC6005 is an access controller (AC) of a large capacity and high performance. It is highly reliable,
easy to install and maintain, and features such advantages as flexible networking and energy conservation.
WLAN AC6005 is located between an access device and aggregation device or between an access device
and a core switch. It is usually deployed in residential areas, corridors, or central equipment rooms in
buildings and installed in an indoor rack, cabinet, or on a desk. The AC6005 connects to APs through
network interfaces to provide access services for users.
TheAC6005 has two models: AC6005-8-PWR andAC6005-8. TheAC6005 provides six GE electrical
interfaces, two GE combo interfaces, an RS232 serial interface, and a USB interface. The six GE electrical
interfaces and two GE combo electrical interfaces can work at a rate of 10/100/1000 Mbit/s. The two GE
combo optical interfaces support 100/1000 Mbit/s auto-sensing optical modules. GE electrical interface 1
can be used as a 100 Mbit/s management network interface. Compared to theAC6005-8, theAC6005-8-
PWR can function as a power sourcing equipment (PSE) to supply power.
Recommended Configurations
Table 1-1 Recommended configurations
Part
Number
Part Description
Configuration Description
Quantity
AC6005
02356813
AC6005-8-PWR-8AP
Bundle(Including AC6005-
8-PWR,Resource License
8AP)
Quotation is required. It can function as a PSE to
supply power.
1
Optical module
02315200
Datacom Products,
DP0M0SFP, Optical
Transceiver, eSFP, GE,
Single-mode Module (1310
nm, 10 km, LC)
Optional. Quotation is required.
The quantity is determined according to project
requirements. It is used on combo optical
interfaces.
4
Optical fiber
14130199
Patch Cord, LC/PC-LC/PC,
Single-mode, G.652D, 2
mm, 10 m
Optional. Single-mode, G.652D, 2 mm, 10 m.
4
14130251
Patch Cord, LC/PC-LC/PC,
Single-mode, G.652D, 2
mm, 20 m
Optional. Single-mode, G.652, 2 mm, 20 m.
14130282
Patch Cord, LC/PC,
LC/PC, Single-Mode,
G.652D, 2 mm, 30 m
Optional. Single-mode, G.652, 2 mm, 30 m.

Huawei Access Controller AC6005 Ordering Guide Public
Configuration Process
To configure the AC6005, perform the following steps:
Select anAC6005 model->Select licenses->Select accessories
1. Select an AC6005 model.
TheAC6005 are available in three models. The three models can manage eightAPs by default.
Table 1-2 List ofAC6005 models
Part
Number
Part Description
Configuration Description
02356813
AC6005-8-PWR-8AP Bundle(Including AC6005-8-
PWR,Resource License 8AP)
Quotation is required. It can
function as a PSE to supply power.
02356816
Assembling Components,AC6005-8-8AP
Bundle(Including AC6005-8,Resource License 8AP)
Quotation is required.
It cannot be used as a PSE.
02356920
Assembling Components,WLAN-D8-S Bundle(Including
AC6005-8-8AP,Eight AP3010DN-AGN-CN)
Quotation is required.
It is a distribution model sold only
in China.
2. Select licenses.
When the number of APs supported by the purchased ACs cannot meet the customer's requirement or
the customer needs to expand the network capacity, the customer needs to purchase licenses to
increase the number of APs supported by the AC6005.
Skip this step if the purchasedAC models meet requirements.
TheAC6005 supports three types of licenses, as shown in the following table.
Table 1-3 List ofAC6005 licenses
Part
Number
Part Description
Configuration Description
88031VEB
Software Charge,AC6005,L-
AC6005-1AP-S,AC6005 Access
Controller AP Resource
License(1 AP)
Quotation is required. The quantity is determined according
to project requirements. This license applies only to the
AC6005. The total number of the selected licenses and
available licenses on the device cannot exceed 128.
88031VEA
Software Charge,AC6005,L-
AC6005-8AP-S,AC6005 Access
Controller AP Resource
License(8 AP)
Quotation is required. The quantity is determined according
to project requirements. This license applies only to the
AC6005. The total number of the selected licenses and
available licenses on the device cannot exceed 128.
88031VEC
Software Charge,AC6005,L-
AC6005-32AP,AC6005 Access
Controller AP Resource
License(32 AP)
Quotation is required. The quantity is determined according
to project requirements. This license applies only to the
AC6005. The total number of the selected licenses and
available licenses on the device cannot exceed 128. It is sold
only on markets outside China.

Huawei Access Controller AC6005 Ordering Guide Public
3. Select accessories.
To select AC6005 accessories, perform the following steps:
Select optical modules->Select optical fibers->Select network cables
(1) Select optical modules.
TheAC6005 provides two GE combo interfaces. Select optical modules of proper types according
to the interfaces used.
Table 1-4 List of optical modules
Part
Number
Part Description
Configuration Description
02230YGU
AC6005, GE-SFP Optical Transceiver
02315204
Datacom Products, DP0M0ESFP,
Optical Transceiver, eSFP, GE,
Multimode Module (850 nm, 0.5 km,
LC)
Optional. Quotation is required.
1. This item is a GE optical module and has
independent transmit and receive channels. It is
used on combo optical interfaces of the
AC6005.
2. Each AC6005 can have at most two such
modules configured.
3. Each module has two optical fibers configured:
a Tx fiber and an Rx fiber.
02315200
Datacom Products, DP0M0SFP, Optical
Transceiver, eSFP, GE, Single-mode
Module (1310 nm, 10 km, LC)
Optional. Quotation is required.
1. This item is a GE optical module and has
independent transmit and receive channels. It is
used on combo optical interfaces of the
AC6005.
2. Each AC6005 can have at most two such
modules configured.
3. Each module has two optical fibers configured:
a Tx fiber and an Rx fiber.
02317346
Switch Products, LE0M0GS4DD,
Optical Transceiver, eSFP, GE, Single-
mode Module (1310 nm, 40 km, LC)
Optional. Quotation is required.
1. This item is a GE optical module and has
independent transmit and receive channels. It is
used on combo optical interfaces of the
AC6005.
2. Each AC6005 can have at most two such
modules configured.
3. Each module has two optical fibers configured:
a Tx fiber and an Rx fiber.
02317347
Switch Products, LE0M0GS4FF, Optical
Transceiver, eSFP, GE, Single-mode
Module (1550 nm, 40 km, LC)
Optional. Quotation is required.
1. This item is a GE optical module and has
independent transmit and receive channels. It is
used on combo optical interfaces of the
AC6005.
2. Each AC6005 can have at most two such

Huawei Access Controller AC6005 Ordering Guide Public
Part
Number
Part Description
Configuration Description
modules configured.
3. Each module has two optical fibers configured:
a Tx fiber and an Rx fiber.
02317348
Switch Products, LE0M0GS8FF, Optical
Transceiver, eSFP, GE, Single-mode
Module (1550 nm, 80 km, LC)
Optional. Quotation is required.
1. 1. This item is a GE optical module and has
independent transmit and receive channels. It is
used on combo optical interfaces of the
AC6005.
2. Each AC6005 can have at most two such
modules configured.
3. Each module has two optical fibers configured:
a Tx fiber and an Rx fiber.
02315206
Datacom Products, DP0M2ESFP,
Optical Transceiver, eSFP, GE, Single-
mode Module (1550 nm, 100 km, LC)
Optional. Quotation is required.
1. This item is a GE optical module and has
independent transmit and receive channels. It is
used on combo optical interfaces of the
AC6005.
2. Each AC6005 can have at most two such
modules configured.
3. Each module has two optical fibers configured:
a Tx fiber and an Rx fiber.
02310LPN
Transceiver, eSFP, 1471 nm, 100 M-2.67
Gbit/s, 5 dBm, 0 dBm, -28 dBm, LC, 80
km
Optional. Quotation is required.
1. This item is a GE optical module and has
independent transmit and receive channels. It is
used on combo optical interfaces of the
AC6005.
2. Each AC6005 can have at most two such
modules configured.
3. Each module has two optical fibers configured:
a Tx fiber and an Rx fiber.
02310LPK
Transceiver, eSFP, 1491 nm, 100M-2.67
Gbit/s, 5 dBm, 0 dBm, -28 dBm, LC, 80
km
Optional. Quotation is required.
1. This item is a GE optical module and has
independent transmit and receive channels. It is
used on combo optical interfaces of the
AC6005.
2. Each AC6005 can have at most two such
modules configured.
3. Each module has two optical fibers configured:
a Tx fiber and an Rx fiber.
02310LPH
Transceiver, eSFP, 1511 nm, 100 M-2.67
Gbit/s, 5 dBm, 0 dBm, -28 dBm, LC, 80
km
Optional. Quotation is required.
1. This item is a GE optical module and has
independent transmit and receive channels. It is
used on combo optical interfaces of the
AC6005.

Huawei Access Controller AC6005 Ordering Guide Public
Part
Number
Part Description
Configuration Description
2. Each AC6005 can have at most two such
modules configured.
3. Each module has two optical fibers configured:
a Tx fiber and an Rx fiber.
02310LPL
Transceiver, eSFP, 1531 nm, 100 M-2.67
Gbit/s, 5 dBm, 0 dBm, -28 dBm, LC, 80
km
Optional. Quotation is required.
1. This item is a GE optical module and has
independent transmit and receive channels. It is
used on combo optical interfaces of the
AC6005.
2. Each AC6005 can have at most two such
modules configured.
3. Each module has two optical fibers configured:
a Tx fiber and an Rx fiber.
02310LPG
Transceiver, eSFP, 1551 nm, 100 M-2.67
Gbit/s, 5 dBm, 0 dBm, -28 dBm, LC, 80
km
Optional. Quotation is required.
1. This item is a GE optical module and has
independent transmit and receive channels. It is
used on combo optical interfaces of the
AC6005.
2. Each AC6005 can have at most two such
modules configured.
3. Each module has two optical fibers configured:
a Tx fiber and an Rx fiber.
02310LNS
Transceiver, eSFP, 1571 nm, 100 M-2.67
Gbit/s, 5 dBm, 0 dBm, -28 dBm, LC, 80
km
Optional. Quotation is required.
1. This item is a GE optical module and has
independent transmit and receive channels. It is
used on combo optical interfaces of the
AC6005.
2. Each AC6005 can have at most two such
modules configured.
3. Each module has two optical fibers configured:
a Tx fiber and an Rx fiber.
02310LNT
Transceiver, eSFP, 1591 nm, 100 M-2.67
Gbit/s, 5 dBm, 0 dBm, -28 dBm, LC, 80
km
Optional. Quotation is required.
1. This item is a GE optical module and has
independent transmit and receive channels. It is
used on combo optical interfaces of the
AC6005.
2. Each AC6005 can have at most two such
modules configured.
3. Each module has two optical fibers configured:
a Tx fiber and an Rx fiber.
02310LPJ
Transceiver, eSFP, 1611 nm, 100 M-2.67
Gbit/s, 5 dBm, 0 dBm, -28 dBm, LC, 80
km
Optional. Quotation is required.
1. This item is a GE optical module and has
independent transmit and receive channels. It is
used on combo optical interfaces of the

Huawei Access Controller AC6005 Ordering Guide Public
Part
Number
Part Description
Configuration Description
AC6005.
2. Each AC6005 can have at most two such
modules configured.
3. Each module has two optical fibers configured:
a Tx fiber and an Rx fiber.
02230YGV
AC6005, FE/STM1-SFP Optical Transceiver
02315233
Datacom Products, DP0M5SFP, Optical
Transceiver, SFP, 100M/155 M,
Multimode Module (1310 nm, 2 km,
LC)
Optional. Quotation is required.
1. This item is a 100 Mbit/s optical module and
has independent transmit and receive channels.
It is used on combo optical interfaces of the
AC6005.
2. Each AC6005 can have at most four such
modules configured.
3. Each module has two optical fibers configured:
a Tx fiber and an Rx fiber.
02315205
Datacom Products, DP0M1ESFP,
Optical Transceiver, eSFP, 100 M/155
M, Single-mode Module (1310 nm, 15
km, LC)
Optional. Quotation is required.
1. This item is a 100 Mbit/s optical module and
has independent transmit and receive channels.
It is used on combo optical interfaces of the
AC6005.
2. Each AC6005 can have at most four such
modules configured.
3. Each module has two optical fibers configured:
a Tx fiber and an Rx fiber.
02317344
Switch Products, LE0M0FS4DD,
Optical Transceiver, eSFP, FE, Single-
mode Module (1310 nm, 40 km, LC)
Optional. Quotation is required.
1. This item is a 100 Mbit/s optical module and
has independent transmit and receive channels.
It is used on combo optical interfaces of the
AC6005.
2. Each AC6005 can have at most four such
modules configured.
3. Each module has two optical fibers configured:
a Tx fiber and an Rx fiber.
02317345
Switch Products, LE0M0FS8FF, Optical
Transceiver, eSFP, FE, Single-mode
Module (1550 nm, 80 km, LC)
Optional. Quotation is required.
1. This item is a 100 Mbit/s optical module and
has independent transmit and receive channels.
It is used on combo optical interfaces of the
AC6005.
2. Each AC6005 can have at most four such
modules configured.
3. Each module has two optical fibers configured:
a Tx fiber and an Rx fiber.

Huawei Access Controller AC6005 Ordering Guide Public
Part
Number
Part Description
Configuration Description
02230YGT
AC6005, BIDI-SFP Optical Transceiver
02315286
Datacom Products, DP0M7SFP, Optical
Transceiver, eSFP, GE, BIDI Single-
mode Module (TX1490/RX1310, 10 km,
LC)
Optional. Quotation is required.
1. This item is a GE optical module used on
combo optical interfaces of the AC6005.
2. It is a GE single-fiber bidirectional optical
module and must be used with 02315285.
3. Each AC6005 can have at most two such
modules configured.
4. Each optical module has one optical fiber
configured.
02315285
Datacom Products, DP0M6SFP, Optical
Transceiver, eSFP, GE, BIDI Single-
mode Module (TX1310/RX1490, 10 km,
LC)
Optional. Quotation is required.
1. This item is a GE optical module used on
combo optical interfaces of the AC6005.
2. It is a GE single-fiber bidirectional optical
module and must be used with 02315286.
3. Each AC6005 can have at most two such
modules configured.
4. Each optical module has one optical fiber
configured.
02315203
Datacom Products, DP0M3SFP, Optical
Transceiver, eSFP, FE, BIDI Single-
mode Module (TX1310/RX1550, 15 km,
LC)
Optional. Quotation is required.
1. This item is a 100 Mbit/s optical module used
on combo optical interfaces of the AC6005.
2. It is an FE single-fiber bidirectional optical
module and must be used with 02315202.
3. Each AC6005 can have at most two such
modules configured.
4. Each optical module has one optical fiber
configured.
02315202
Datacom Products, DP0M2SFP, Optical
Transceiver, eSFP, FE, BIDI Single-
mode Module (TX1550/RX1310, 15 km,
LC)
Optional. Quotation is required.
1. This item is a 100 Mbit/s optical module used
on combo optical interfaces of the AC6005.
2. It is an FE single-fiber bidirectional optical
module and must be used with 02315203.
3. Each AC6005 can have at most two such
modules configured.
4. Each optical module has one optical fiber
configured.
(2) Select optical fibers.
The optical fiber configuration principles are as follows:

Huawei Access Controller AC6005 Ordering Guide Public
1. If an optical module with independent transmit and receive channels is used, each optical
interface requires one Tx fiber and one Rx fiber of the same type. If a single-fiber
bidirectional optical module is used, each interface requires only one optical fiber.
2. Single-mode optical modules must be used with single-mode optical fibers, and multimode
optical modules must be used with multimode optical fibers. By default, no optical fiber is
delivered with the product.
Table 1-5 List of optical fibers
Part
Number
Part Description
Configuration Description
14130197
Patch Cord, FC/PC, LC/PC, Single-mode,
G.652D, 2 mm, 10 m
Optional. Quotation is required.
1. This item is a single-mode optical fiber and can
be used only with a single-mode optical module.
2. If an optical module with independent transmit
and receive channels is used on the optical
interface, each optical interface requires one Tx
fiber and one Rx fiber. If a single-fiber
bidirectional optical module is used, each
interface requires only one optical fiber.
14130222
Patch Cord, LC/PC-LC/PC, Multimode, 2
mm, 10 m
Optional. Quotation is required.
1. This item is a multimode optical fiber and can be
used only with a multimode optical module.
2. If an optical module with independent transmit
and receive channels is used on the optical
interface, each optical interface requires one Tx
fiber and one Rx fiber. If a single-fiber
bidirectional optical module is used, each
interface requires only one optical fiber.
14130295
Patch Cord, LC/PC-LC/PC, Multimode, 2
mm, 20 m
Optional. Quotation is required.
1. This item is a multimode optical fiber and can be
used only with a multimode optical module.
2. If an optical module with independent transmit
and receive channels is used on the optical
interface, each optical interface requires one Tx
fiber and one Rx fiber. If a single-fiber
bidirectional optical module is used, each
interface requires only one optical fiber.
14130199
Patch Cord, LC/PC-LC/PC, Single-mode,
G.652D, 2 mm, 10 m
Optional. Quotation is required.
1. This item is a single-mode optical fiber and can
be used only with a single-mode optical module.
2. If an optical module with independent transmit
and receive channels is used on the optical
interface, each optical interface requires one Tx
fiber and one Rx fiber. If a single-fiber
bidirectional optical module is used, each
interface requires only one optical fiber.
14130251
Patch Cord, LC/PC-LC/PC, Single-mode,
Optional. Quotation is required.

Huawei Access Controller AC6005 Ordering Guide Public
Part
Number
Part Description
Configuration Description
G.652D, 2 mm, 20 m
1. This item is a single-mode optical fiber and can
be used only with a single-mode optical module.
2. If an optical module with independent transmit
and receive channels is used on the optical
interface, each optical interface requires one Tx
fiber and one Rx fiber. If a single-fiber
bidirectional optical module is used, each
interface requires only one optical fiber.
14130223
Patch Cord, LC/PC-SC/PC, Multimode, 2
mm, 10 m
Optional. Quotation is required.
1. This item is a multimode optical fiber and can be
used only with a multimode optical module.
2. If an optical module with independent transmit
and receive channels is used on the optical
interface, each optical interface requires one Tx
fiber and one Rx fiber. If a single-fiber
bidirectional optical module is used, each
interface requires only one optical fiber.
14130279
Patch Cord, LC/PC, SC/PC, Multimode, 2
mm, 20 m
Optional. Quotation is required.
1. This item is a multimode optical fiber and can be
used only with a multimode optical module.
2. If an optical module with independent transmit
and receive channels is used on the optical
interface, each optical interface requires one Tx
fiber and one Rx fiber. If a single-fiber
bidirectional optical module is used, each
interface requires only one optical fiber.
14130196
Patch Cord, LC/PC-SC/PC, Single-mode,
G.652D, 2 mm, 10 m
Optional. Quotation is required.
1. This item is a single-mode optical fiber and can
be used only with a single-mode optical module.
2. If an optical module with independent transmit
and receive channels is used on the optical
interface, each optical interface requires one Tx
fiber and one Rx fiber. If a single-fiber
bidirectional optical module is used, each
interface requires only one optical fiber.
14130280
Patch Cord, LC/PC, SC/PC, Single-mode,
G.652D, 2 mm, 20 m
Optional. Quotation is required.
1. This item is a single-mode optical fiber and can
be used only with a single-mode optical module.
2. If an optical module with independent transmit
and receive channels is used on the optical
interface, each optical interface requires one Tx
fiber and one Rx fiber. If a single-fiber
bidirectional optical module is used, each
interface requires only one optical fiber.
14130276
Patch Cord, LC/PC, SC/PC, Single-mode,
Optional. Quotation is required.

Huawei Access Controller AC6005 Ordering Guide Public
Part
Number
Part Description
Configuration Description
G.652D, 2 mm, 30 m
1. This item is a single-mode optical fiber and can
be used only with a single-mode optical module.
2. If an optical module with independent transmit
and receive channels is used on the optical
interface, each optical interface requires one Tx
fiber and one Rx fiber. If a single-fiber
bidirectional optical module is used, each
interface requires only one optical fiber.
14130277
Patch Cord, FC/PC, LC/PC, Multimode, 2
mm, 30 m
Optional. Quotation is required.
1. This item is a multimode optical fiber and can be
used only with a multimode optical module.
2. If an optical module with independent transmit
and receive channels is used on the optical
interface, each optical interface requires one Tx
fiber and one Rx fiber. If a single-fiber
bidirectional optical module is used, each
interface requires only one optical fiber.
14130278
Patch Cord, FC/PC, LC/PC, Single-mode,
G.652D, 2 mm, 30 m
Optional. Quotation is required.
1. This item is a single-mode optical fiber and can
be used only with a single-mode optical module.
2. If an optical module with independent transmit
and receive channels is used on the optical
interface, each optical interface requires one Tx
fiber and one Rx fiber. If a single-fiber
bidirectional optical module is used, each
interface requires only one optical fiber.
14130282
Patch Cord, LC/PC, LC/PC, Single-mode,
G.652D, 2 mm, 30 m
Optional. Quotation is required.
1. This item is a single-mode optical fiber and can
be used only with a single-mode optical module.
2. If an optical module with independent transmit
and receive channels is used on the optical
interface, each optical interface requires one Tx
fiber and one Rx fiber. If a single-fiber
bidirectional optical module is used, each
interface requires only one optical fiber.
14130294
Patch Cord, LC/PC-LC/PC, Multimode, 2
mm, 30 m
Optional. Quotation is required.
1. This item is a multimode optical fiber and can be
used only with a multimode optical module.
2. If an optical module with independent transmit
and receive channels is used on the optical
interface, each optical interface requires one Tx
fiber and one Rx fiber. If a single-fiber
bidirectional optical module is used, each
interface requires only one optical fiber.
14130273
Patch Cord, FC/PC, LC/PC, Multimode, 2
Optional. Quotation is required.

Huawei Access Controller AC6005 Ordering Guide Public
Part
Number
Part Description
Configuration Description
mm, 20 m
1. This item is a multimode optical fiber and can be
used only with a multimode optical module.
2. If an optical module with independent transmit
and receive channels is used on the optical
interface, each optical interface requires one Tx
fiber and one Rx fiber. If a single-fiber
bidirectional optical module is used, each
interface requires only one optical fiber.
14130274
Patch Cord, FC/PC, LC/PC, Single-mode,
G.652D, 2 mm, 20 m
Optional. Quotation is required.
1. This item is a single-mode optical fiber and can
be used only with a single-mode optical module.
2. If an optical module with independent transmit
and receive channels is used on the optical
interface, each optical interface requires one Tx
fiber and one Rx fiber. If a single-fiber
bidirectional optical module is used, each
interface requires only one optical fiber.
14130275
Patch Cord, LC/PC, SC/PC, Multimode, 2
mm, 30 m
Optional. Quotation is required.
1. This item is a multimode optical fiber and can be
used only with a multimode optical module.
2. If an optical module with independent transmit
and receive channels is used on the optical
interface, each optical interface requires one Tx
fiber and one Rx fiber. If a single-fiber
bidirectional optical module is used, each
interface requires only one optical fiber.
14130221
Patch Cord, FC/PC, LC/PC, Multimode,
2mm,10m
Optional. Quotation is required.
1. This item is a multimode optical fiber and can be
used only with a multimode optical module.
2. If an optical module with independent transmit
and receive channels is used on the optical
interface, each optical interface requires one Tx
fiber and one Rx fiber. If a single-fiber
bidirectional optical module is used, each
interface requires only one optical fiber.
14130253
Patch Cord,FC/PC-SC/PC, Singlemode,
G.652D, 3mm, 10m
Optional. Quotation is required.
1. This item is a single-mode optical fiber and can
be used only with a single-mode optical module.
2. If an optical module with independent transmit
and receive channels is used on the optical
interface, each optical interface requires one Tx
fiber and one Rx fiber. If a single-fiber
bidirectional optical module is used, each
interface requires only one optical fiber.
14130230
Patch Cord,SC/PC-SC/PC, Singlemode,
Optional. Quotation is required.

Huawei Access Controller AC6005 Ordering Guide Public
Part
Number
Part Description
Configuration Description
G.652D, 3mm, 10m
1. This item is a single-mode optical fiber and can
be used only with a single-mode optical module.
2. If an optical module with independent transmit
and receive channels is used on the optical
interface, each optical interface requires one Tx
fiber and one Rx fiber. If a single-fiber
bidirectional optical module is used, each
interface requires only one optical fiber.
14130001
Adapter, FC-FC, 2, Silvery white, Shell:
Metal, Sleeve: Zirconia, Round
Optional. Quotation is required.
1. This item is used to connect two optical fibers
with FC connectors.
2. The quantity is determined according to project
requirements.
14130134
Adapter, SC-SC, 2, Blue, Shell: Plastic,
Sleeve: Zirconia, Square
Optional. Quotation is required.
1. This item is used to connect two optical fibers
with SC connectors.
2. The quantity is determined according to project
requirements.
14130248
Adapter, LC/PC-LC/PC, 2, Blue, Shell:
Plastic, Sleeve: Zirconia, Square
Optional. Quotation is required.
1. This item is used to connect two optical fibers
with LC/PC connectors.
2. The quantity is determined according to project
requirements.
A power adapter (14130001, 14130134, and 14130248) is used to connect two optical jumpers or to
connect an optical jumper to an optical module when connectors of the optical jumper do not match with
the optical module interfaces.
(3) Select network cables.
Purchase network cables according to project requirements.
Table 1-6 List of network cables
Part
Number
Part Description
Configuration Description
25050014
Twisted-Pair Cable, 100 ohm, Category 5e UTP,
0.51 mm, 24 AWG, 8 Cores, PANTONE 430U, Use
with Plug: 14080082
Quotation is required. The quantity is
determined according to project
requirements.
14080082
Network Interface Connector, 8-Bit 8-Pin, Crystal
Plug, Matching 25050014
Quotation is required. The quantity is
determined according to project
requirements.