Huawei E5576-320 User manual

Quick Start

96725738_01

Inserting the SIM Card
Insert the SIM card into the slot with its chip side facing down
and the notched side facing out.
micro-SIM (3FF)
mini-SIM (2FF) nano-SIM (4FF)
Remove the back cover to view the default Wi-Fi® name
(SSID) and password (Wi-Fi Key).
1

Powering on the Mobile WiFi
Press and hold the Power button to power on the Mobile WiFi.
Your Mobile WiFi searches for mobile network signals
automatically after it is powered on.
Green: Strong signal
Yellow: Weak signal
Red: No Internet access
Refer to the FAQs section below if the Signal indicator on
your Mobile WiFi is red or yellow.
2

Accessing the Internet
Connect your device to the Mobile WiFi to access the Internet.
Remove the back cover to view the default Wi-Fi name (SSID)
and password (Wi-Fi Key).
xxxxxxxx
SSID: XXXXXX-XXXX
WIFI KEY: XXXXXXXX
Refer to the FAQs section below if you cannot access the
Internet after you have connected to your Mobile WiFi.
3

Device Management
Using app: You may scan the QR code below to download
HUAWEI SmartHome App to manage your Mobile WiFi, for
example, changing your Wi-Fi name or password, or checking
data usage.
If you cannot add device in the app, please check if you
are using the latest version.
Using browser: Enter 192.168.8.1 into the browser on your
mobile phone or computer to go to your Mobile WiFi's web-
based management page. The default login password is
admin.
lIf you cannot visit the web-based management page,
check whether your mobile phone or computer is
connected to your Mobile WiFi.
lWe suggest that you modify the default Wi-Fi name
and password, and the default login password to
ensure that your data is secure.
4

Charging
Red: Low battery power. Please charge your Mobile
WiFi.
Please use the original Huawei charging cable and power
adapter.
The power adapter is an optional accessory that you can
purchase from retailers.
5

Appearance
Signal indicator Power button
Battery indicator Reset button
SIM card slot
To power off the Mobile WiFi: Press and hold the Power
button until all indicators turn off.
To restore the Mobile WiFi to its factory settings: Use a
pin to press and hold the Reset button while your Mobile WiFi
is powered on. When all indicators start to ash, the reset is
complete.
6

FAQs
What should I do if the Signal indicator on my
Mobile WiFi is red and I do not have Internet
access?
lMake sure that the SIM card is the right size and inserted
correctly into the slot.
lConrm that your SIM card has sufcient balance. If your
SIM card is new, ensure that it has Internet access.
lThe PIN verication feature may have been enabled. 1)
Open the HUAWEI SmartHome App, and go to
Advanced Settings > PIN Management to enter the
correct PIN code. 2) Disable this feature if you don't want to
enter your PIN on a regular basis.
lIf the issue persists, restore your Mobile WiFi to its factory
settings and try again.
What should I do if the Signal indicator on my
Mobile WiFi is yellow, the signal strength is
weak, or the network speed is slow?
lMove your Mobile WiFi closer to a window or use it in an
open area to receive better signal.
lHowever, if your mobile phone receives good signal
strength at the same spot where your Mobile WiFi is placed,
restore your Mobile WiFi to its factory settings and try
again.
Refer to the Appearance section above to restore your
Mobile WiFi to its factory settings.
What should I do if I can't connect to my Mobile
WiFi after a period of inactivity?
Your Mobile WiFi may be in sleep mode or powered off.
lPress the Power button on your Mobile WiFi. If indicators
light up, your Mobile WiFi was in sleep mode. In this mode,
your Mobile WiFi automatically disables Wi-Fi to save
7

power. You can disable the sleep mode through the
HUAWEI SmartHome App.
lIf there is no response after you press the Power button,
your Mobile WiFi is powered off. Press and hold the Power
button to power it back on.
Avoid using your Mobile WiFi where active wireless
devices are prohibited (such as during ights), and ensure
that it is powered off.
Why can't I access the web-based management
page by entering 192.168.8.1 on my browser?
This is likely due to an IP address conict when the Mobile
WiFi assigns itself a new IP address. Please try entering
192.168.9.1 and see if this resolves the issue.
8