Huawei LTE CPE E5172 User manual

1
UK
Thank you for purchasing the WiFi Router. This WiFi
Router brings you a high speed wireless network
connection.
This document will help you understand your WiFi Router so you can start using it
right away. Please read this document carefully before using your WiFi Router.
For detailed information aboutthe functions and configurations of the WiFi Router,
refer to the online help on the web management page that comes with the WiFi
Router.
Note:
You must install Adobe Reader version 6.0 or higher to read the online help.
Packing List
The following items are included in your WiFi Router package. If any items are
missing or damaged, please contact your local dealer. If any of the optional
accessories are not included in the package, you can contact an authorized dealer to
purchase them separately.
Item Quantity
LTE WiFi Router 1
Power adapter 1
Quick Start Guide 1
Safety Information 1
Network cable (optional) 1
Battery (optional) 1
External antenna (optional) 1

2
Getting to Know Your WiFi Router
Note:
The WiFi Router function descriptions and illustrations in this document are for
your reference only. The product you have purchased may vary.
Ბ
1Power indicator
zSteady blue: The device is powered on. The power adapter is in use and working
properly, or the power adapter is not in use but the battery level is high.
zAlternating blue and pink: The device is powered on. The power adapter is not in
use or not working properly, and the battery level is low.
zSteady pink: The device is malfunctioning.
Note:
zIf your device malfunctions, power it off. Wait at least 15 minutes before you
power it on again. If the problem persists, contact your dealer.

3
UK
zOff:The device is powered off.
Ბ
2WLAN indicator
zOn: WLAN function enabled
zBlinking: Transmitting data through WLAN
zOff: WLAN function disabled
Ბ
3WPS indicator
zOn: WPS function enabled
zBlinking:WPS interconnection verification is in progress. This process should not
take longer than 2 minutes.
zOff:WPS function disabled
Ბ
4LAN indicator
zOn: The port is connected to a device.
zBlinking: Data is being transmitted through the port.
zOff: No device is connected to the port.
Ბ
5Voice indicator
zOn: Off-hook condition
zBlinking: Incoming call
zOff: On-hook condition
Ბ
6Signal indicator
zOn: Indicates network signal strength. Full light indicates strong signal.
zOff: No network signal.
Ბ
7WLAN button
Press and hold for more than 2 seconds to enable or disable the WLAN function.
Ბ
8Reset button
Press and hold for more than 2 seconds to restore the device to its factory settings.

4
Ბ
9WPS button
After the WPS function is enabled, press and hold this button for more than 2
seconds to initiate WPS interconnection.
Ბ
10 External antenna port
Connect to an external antenna.
Ბ
11 Power button
Press this button to power the device on or off.
Ბ
12 Power port
Connect to the device's power adapter.
Ბ
13 LAN port
Connect to computers, switches, or other network devices.
Ბ
14 TEL port
Connect to a phone.
Ბ
15 USIM card slot
Accommodate a USIM card.
Ბ
16 Battery compartment
Install the battery.
Ბ
17 Battery port
Insert the battery connection cable.
Ბ
18 Battery cover
Note:
zAll indicators except the power indicator are blinking:The device is being
upgraded or is restarting. To avoid damage to the device, do not power off
during this process.
Note:
Restoring the default settings of the WiFi Router will override all the previous
settings.

5
UK
Getting Started
Installing the USIM Card and the Battery
Install the USIM card and the battery according to the illustration.
Note:
zDo not remove the USIM card when it is in use. Doing so will affect the
performance of your WiFi Router and data stored on the USIM card may be
lost.
zThe WiFi Router automatically charges its battery when connected to a power
source.
zThe battery is an optional accessory. If it is not included in the package, you
may contact an authorized dealer to buy a battery compatible with the WiFi
Router.
Connecting to a Power Adapter
Install the power adapter according to the illustration.

6
Note:
zOnly use power adapters compatible with the WiFi Router and provided by a
designated manufacturer. Use of an incompatible power adapter or one from
an unknown manufacturer may cause the WiFi Router to malfunction, fail, or
could even cause a fire. Such use voids all warranties, whether expressed or
implied, on the product.
zThe WiFi Router's power adapter model is HW-120200X1W or
HKA02412020-YK. X and Y represent letters or numbers that vary by region.
For details about the specific adapter model, contact an authorized dealer.
Connecting a Device to the WiFi Router
Before connecting the device, please read the safety information carefully.
Note:
zDuring thunderstorms and rainy weather, turn off and disconnect the device.
zUse a standard or authorized external antenna to avoid device malfunctions.
Selecting the Installation Environment
Obstacles such as concrete and wooden walls will affect the transmission of the
network signal. It is recommended that when you install devices you choose an open
space and ensure thatthere are no obstructions between the computer and the
device.
Keep the device away from equipment that generates strong magnetic and electric
fields, for instance microwaves, refrigerators, andsatellite receivers.

7
UK
Cable Connection
When connecting, use the power adapter thatcame as a set with the product. When
finished, press the power button to turn on the device.
The connection cable illustration is for reference only.
When the device is in use, you can alter its position or orientation to improve signal
reception. If the device is in use, you may change its location or position to achieve
better signal strength and speed. For better coverage, place the 4G router as close
to window as possible or move your device closer to the router for improved speed.
If several users are connected simultaneously, the speed may be reduced. Wait
until fewer users are connected before downloading large files. The signal strength
light indicates the received signal strength.
Logging In to the Web Management Page
The web-based configuration utility can be used for initial device installation,
parameter configuration, and function managementthrough the browser.
The Windows XP operating system and Internet Explorer 7.0 are used as an
example. Ensure that the device is connected to the computer. Follow these steps
to log in to the web management page:

8
1. Connect device cables.
2. Configure the computer's IP address so that the IP addresses of the computer
and the device are in the same network segment.
Note:
zThe device's default IP address is 192.168.1.1, the subnet mask is
255.255.255.0.
zIt is recommended that you use the automatically obtained IP addresses for the
computer and domain name system (DNS) server. If you manually configure
the computer IP address, you must set the DNS server IP address to the
device IP address. Otherwise, you will fail to log in to the web management
page.
3. Open the browser, and enter http://192.168.1.1 in the address box.
4. Enter the user name and password to log in to the web management page.
Note:
zThe default user name is admin.
zThe default password is admin.
If your connection jumps between the 4G, 3G and 2G networks
In the 4G router setup manager you can lock the router to a particular network (only
possible when disconnected):
Select Internet from the menu in the upper part, then go to Network Connection in
the left menu. Select Network Mode and one of the preferred modes: Auto, 4G, 3G
or 2G.
The WiFi Router supports the following frequency bands
xFDD LTE 800/900/1800/2100/2600 MHz, TDD LTE 2600 MHz
xDC-HSPA+/HSPA+/HSPA/UMTS 900/2100 MHz
xEDGE/GPRS/GSM 850/900/1800/1900 MHz

9
UK
The maximum data transfer speed of this WiFi Router are listed as
follows
xDownlink FDD LTE packet data service of up to 150 Mbit/s
xUplink FDD LTE packet data service of up to 50 Mbit/s
xDownlink TDD LTE packet data service of up to 80 Mbit/s
xUplink TDD LTE packet data service of up to 20 Mbit/s
xDownlink DC-HSPA+ packet data service of up to 42 Mbit/s
xUplink DC-HSPA+ packet data service of up to 5.76 Mbit/s
xDownlink HSPA+ packet data service of up to 21 Mbit/s
xUplink HSPA+ packet data service of up to 5.76 Mbit/s
xUplink and downlink UMTS packet data service of up to 384 kbit/s
xUplink and downlink EDGE packet data service of up to 236.8 kbit/s
xUplink and downlink GPRS packet data service of up to 85.6 kbit/s
xWireless LAN Access Point IEEE 802.11b/g/n
Antennas of this WiFi Router
xBuilt-in LTE/UMTS/GSM antenna
xBuilt-in WLAN antenna
xExternal antenna interface: type is 1 x SMA
Userlimitation for WLAN
xSTA management: support limit of access users (up to 32 users)
If you need more information about WiFi Router, please go to UI, to choose “Help”
to get the document.
LTE is a trademark of ETSI.

TSP 2993_2-1206