Huawei NT3BB-4PVWN-147 User manual

NT3BB-4PVWN-147
VDSL Router 4 Port Wi-Fi Dual Band
Quick Installation Guide
Image device
Version NT3BB-4PVWN-147
1. NT3BB-4PVWN-147 Router Status
2. Internet connection Settings
3. WAN,Wireless Settings
4. Hardware Installation
5. Packing List

1. NT3BB-4PVWN-147 Router Status
Status
No.
Indicator
Status
Description
1
POWER
On
The device is turned on
Blinking
The device is starting up
Off
The device is turned off or out of service
2
DSL
On
The Devices connected to the network NODE Dslam (cabinet)
Blinking
The device is connecting to Dslam (NODE of network)
Off
The device is not connection with Dslam (NODE cabinet of the network)
3
Internet
On
Connect to the Internet
Blinking
The device is receiving send data over the Internet
Off
Cannot connect to the Internet
4
WLAN
Blinking
The Wireless function is enabled
Fast Blinking
Data transmission between Router and the device (Wireless)
Off
The wireless function is disabled
5
LAN
On
There is Lan connectivity between the router and the device
Blinking
Data is being transmitted between Router and Computer
Off
There is no Lan connectivity between the router and the device
6
USB
On
Router is connected to USB
Off
Router is not connected to USB

2. Internet connection Settings
There are 2 type to set the Internet connection.
Type 1. Shortcut
Step 1 Open the Internet Explorer(IE) browser and enter http://192.168.1.1/3bb
Step 2 In the Quick Configuration page that is displayed, enter the username, password
(for surf internet) and validate code.
After finishing, click Save to apply the internet settings.
Step 3 In the Quick Configuration page appears pop-up "Save Completed", click OK to
close this page.
Step 4 In the Quick Configuration page that is displayed, click Close to close this page.
Type 2. General
Step 1 Open the Internet Explorer(IE) browser and enter http://192.168.1.1
Step 2 In the login window, enter the Username is admin and Password is last 4
digits of router Mac Address and Validate code
Step 3 Click Login. After the password is authenticated, the Web configuration window is
displayed.

Condition
♦If you put the wrong Username/Password more than 30 times, the system will
lock for 1 minutes. Then the system will lock out automatically
♦You should change the password after the first login to protect against
unauthorized access
♦After logging in to the system for 5 minutes, if you do not perform any operations
it will log out and returns to the login interface automatically.
Note: If you want to Remote to customer’s device, please ask for customer’s permission
all the times (See How Remote Router Click)
3. WAN,Wireless Settings
3.1 IP Address Of Cards LAN settings
Configure TCP / IP properties of cards LAN is Obtain an IP address automatically from
modem or configure IP address of the computer in the network with Router 2. Web
configuration Type 1. Shortcut to access the internet (“Wan Setting” Step direct to
device is checking)
3.2 Wireless settings
- Choose Home Network --> Click WLAN Settings(1)
- The default SSID settings ,for Wireless and 2.4GHz(2) and Wireless 5GHz(3) (You can
choose both or just one signal)
- SSID: named what you want.
- Enable SSID: Tick To turn signal (can choose both or just one signal)
- WPA pre - shared key(4) set the password that you need
- Enter Validate Code(5)
- Click Save(6)
- After finishing, you can enter URL Website to access Internet

4. Hardware Installation
4.1 step 1 : Connect the incoming line to the DSL interface of the device through a
telephone cable(1)
4.2 step 2 : Connect the network card of your PC to the LAN interface of the device through
an Ethernet cable (MDI/MDIX)(2)
4.3 step 3 : Plug the input end of the power adapter to the wall outlet and connect the
output end to the Power interface of the device(3)
The following application diagram is for the connection of the router, PC
and Telephone.
Note : The figures in this guide are for reference only. The appearance and display
features may vary slightly depending on the actual product version.
5. Packing List
The following table lists the items in the product package.
รายการ
จ านวน
VDSL Router
1
Power Adapter
1
RJ 45 Cable
1
RJ 11 Cable
1
Quick Installation Guide
1
Safety Information
1
Note: If you find anything missing or damaged, contact service provider.