Huawei Tecal RH5485 User manual

Tecal RH5485 Server
V100R001C00
Installation and User’s Guide
Issue
02
Date
2011-05-25
HUAWEI TECHNOLOGIES CO., LTD.

Issue 02 (2011-05-25) Huawei
Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
i
Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: [e-mail]

Tecal RH5485 Server
Installation and User’s Guide
About This Document
Issue 02 (2011-05-25) Huawei
Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
iii
About This Document
Summarize
This document describes the installation and configuration of RH5485 server.
Intended Audience
This document is intended for:
Technical support engineers
Installation and commissioning engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
Indicates a hazard with a high level of risk, which if not
avoided, will result in death or serious injury.
Indicates a hazard with a medium or low level of risk, which if
not avoided, could result in minor or moderate injury.
Indicates a potentially hazardous situation, which if not
avoided, could result in equipment damage, data loss,
performance degradation, or unexpected results.
Indicates a tip that may help you solve a problem or save time.
Provides additional information to emphasize or supplement
important points of the main text.

About This Document
Tecal RH5485 Server
Installation and User’s Guide
iv Huawei
Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Issue 02 (2011-05-25)
Change History
Updates between document issues are cumulative. Therefore, the latest document issue
contains all updates made in previous issues.
Changes in Issue 02 (2011-05-25)
This issue is the second official release, which incorporates the following changes:
Some figures in chapter 2 are updated.
Some format errors are modified.
Changes in Issue 01 (2010-08-30)
Initial field trial release.

Tecal RH5485 Server
Installation and User’s Guide
Contents
Issue 02 (2011-05-25) Huawei
Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
v
Contents
About This Document...................................................................................................................iii
1 The Tecal RH5485 server ..........................................................................................................1-1
1.1 The HUAWEI Documentation CD................................................................................................................1-1
1.1.1 Hardware and software requirements...................................................................................................1-1
1.1.2 Using the Documentation Browser ......................................................................................................1-1
1.2 Related documentation..................................................................................................................................1-2
1.3 Notices and statements in this document.......................................................................................................1-3
1.4 Features and specifications............................................................................................................................1-3
1.5 What your server offers.................................................................................................................................1-4
1.6 Reliability, availability, and serviceability ....................................................................................................1-6
1.7 The UpdateXpress System Pack Installer (UXSPI).......................................................................................1-8
1.8 Server controls, LEDs, and power.................................................................................................................1-8
1.8.1 Front view............................................................................................................................................1-8
1.8.2 Rear view...........................................................................................................................................1-11
1.8.3 Rear view LEDs.................................................................................................................................1-12
1.8.4 Server power features.........................................................................................................................1-14
2 Installing optional devices.......................................................................................................2-1
2.1 Server components........................................................................................................................................2-1
2.2 Installation guidelines .................................................................................................................................2-10
2.3 Internal cable routing and connectors..........................................................................................................2-13
2.4 Removing the top cover ..............................................................................................................................2-16
2.5 Removing the top-cover bracket .................................................................................................................2-17
2.6 Installing the top-cover bracket...................................................................................................................2-18
2.7 Removing the bezel.....................................................................................................................................2-19
2.8 Installing a PCI Express adapter .................................................................................................................2-19
2.9 Installing a ServeRAID adapter for use with eXFlash drives......................................................................2-22
2.10 Installing a hot-swap power supply...........................................................................................................2-25
2.11 Installing a hot-swap hard disk drive.........................................................................................................2-26
2.12 Installing a DVD (optical) drive................................................................................................................2-28
2.13 Installing a 2.5-inch hard disk drive backplane.........................................................................................2-29
2.14 Installing a QPI wrap card.........................................................................................................................2-33
2.15 Installing an internal removable flash drive..............................................................................................2-34

Contents
Tecal RH5485 Server
Installation and User’s Guide
vi Huawei
Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Issue 02 (2011-05-25)
2.16 Memory modules ......................................................................................................................................2-35
2.17 Installing a microprocessor .......................................................................................................................2-44
2.18 Completing the installation .......................................................................................................................2-49
3 Configuring the server ..............................................................................................................3-1
3.1 Using the Setup utility...................................................................................................................................3-2
3.1.1 Starting the Setup utility.......................................................................................................................3-2
3.1.2 Setup utility menu choices...................................................................................................................3-2
3.1.3 Password ..............................................................................................................................................3-6
3.2 Using the Boot Selection Menu program......................................................................................................3-8
3.3 Starting the backup server firmware..............................................................................................................3-8
3.4 Using the ServerGuide Setup and Installation CD........................................................................................3-8
3.5 Using the integrated management module ..................................................................................................3-10
3.6 Obtaining the IP address for the Web interface access................................................................................3-11
3.7 Logging on to the Web interface .................................................................................................................3-12
3.8 Using the remote presence and blue-screen capture features......................................................................3-12
3.9 Enabling the Broadcom Gigabit Ethernet Utility program..........................................................................3-13
3.10 Configuring the Broadcom Gigabit Ethernet controller............................................................................3-13
3.11 Configuring RAID arrays..........................................................................................................................3-13
4 Regulatory Compliance Standards.........................................................................................4-1
4.1 FCC Certification..........................................................................................................................................4-1
4.2 CE Certification ............................................................................................................................................4-1
4.3 UL Certification ............................................................................................................................................4-1
4.3.1 LISTED................................................................................................................................................4-2
4.3.2 Classification........................................................................................................................................4-2
4.3.3 Recognized...........................................................................................................................................4-2
4.4 RoHS.............................................................................................................................................................4-2
5 How to Obtain Help ..................................................................................................................5-1
5.1 Preparations Before Contacting Huawei .......................................................................................................5-1
5.1.1 Collecting Problem Information ..........................................................................................................5-1
5.1.2 Making Debugging Preparations..........................................................................................................5-1
5.2 How to Use the Document............................................................................................................................5-1
5.3 How to Obtain Help From Website...............................................................................................................5-2
5.4 How to Contact Huawei................................................................................................................................5-2

Tecal RH5485 Server
Installation and User’s Guide
Figures
Issue 02 (2011-05-25) Huawei
Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
vii
Figures
Figure 1-1 Front view.........................................................................................................................................1-8
Figure 1-2 Operator information panel...............................................................................................................1-9
Figure 1-3 Light path diagnostics panel ...........................................................................................................1-10
Figure 1-4 Controls and LEDs on the light path diagnostics panel..................................................................1-11
Figure 1-5 Rear view........................................................................................................................................1-11
Figure 1-6 Rear view LEDs..............................................................................................................................1-13
Figure 2-1 Server components............................................................................................................................2-2
Figure 2-2 Memory-card DIMM connectors......................................................................................................2-3
Figure 2-3 Memory-card LEDs..........................................................................................................................2-4
Figure 2-4 SAS-backplane connectors...............................................................................................................2-5
Figure 2-5 eXFlash backplane connectors..........................................................................................................2-5
Figure 2-6 Microprocessor-board connectors.....................................................................................................2-6
Figure 2-7 Microprocessor-board LEDs.............................................................................................................2-7
Figure 2-8 I/O-board connectors........................................................................................................................2-8
Figure 2-9 I/O-board jumpers.............................................................................................................................2-9
Figure 2-10 I/O-board LEDs............................................................................................................................2-10
Figure 2-11 Routing of the DVD power, fans 1 and 2, scalability LED, and operator information cables......2-14
Figure 2-12 Routing of the USB and DVD signal cables.................................................................................2-15
Figure 2-13 Lift the cover-release latch............................................................................................................2-16
Figure 2-14 Slide the blue latches ....................................................................................................................2-17
Figure 2-15 Installing the top-cover bracket ....................................................................................................2-18
Figure 2-16 Removing the bezel ......................................................................................................................2-19
Figure 2-17 Push the adapter retention latch....................................................................................................2-21
Figure 2-18 Push the adapter retention latch....................................................................................................2-23
Figure 2-19 Route the SAS cables....................................................................................................................2-24
Figure 2-20 Install a hot-swap power supply ...................................................................................................2-26

Figures
Tecal RH5485 Server
Installation and User’s Guide
viii Huawei
Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Issue 02 (2011-05-25)
Figure 2-21 Install a hot-swap hard disk drive.................................................................................................2-27
Figure 2-22 Install a DVD drive.......................................................................................................................2-28
Figure 2-23 Remove the backplane carrier and SAS power cable handle........................................................2-30
Figure 2-24 Remove the backplane filler.........................................................................................................2-30
Figure 2-25 Orient and install the new backplane............................................................................................2-31
Figure 2-26 ServeRAID M5015 controller ......................................................................................................2-32
Figure 2-27 ServeRAID BR10i controller........................................................................................................2-32
Figure 2-28 Install the ServeRAID adapter onto the RAID adapter carrier .....................................................2-32
Figure 2-29 Install a QPI wrap card .................................................................................................................2-33
Figure 2-30 Install an internal removable flash drive.......................................................................................2-34
Figure 2-31 Locations of the memory-card connectors....................................................................................2-36
Figure 2-32 DIMM connectors on a memory card...........................................................................................2-36
Figure 2-33 LEDs on the memory card............................................................................................................2-40
Figure 2-34 Remove the server top cover ........................................................................................................2-42
Figure 2-35 Insert the DIMM into the connector .............................................................................................2-43
Figure 2-36 Install the memory card ................................................................................................................2-44
Figure 2-37 Populate the microprocessor sockets............................................................................................2-45
Figure 2-38 Slide the blue latches ....................................................................................................................2-46
Figure 2-39 Open the release socket lever........................................................................................................2-47
Figure 2-40 Pick up the microprocessor...........................................................................................................2-47
Figure 2-41 Position the microprocessor with the microprocessor tool...........................................................2-48
Figure 2-42 Secure the microprocessor............................................................................................................2-48
Figure 2-43 Locations of the input and output connectors...............................................................................2-50