Hubsan H123D X4 JET Quick start guide

E: 0%
T: 0%
R: 0%
A: 0%
45.877 503 , -106.123984
45.877503 , -106.123984，65m
Pi tch 35 °
Yaw 2 5°
Ro ll 45 °
SPEED 0.0M/S
H: 0.0m
D: 0.0m
0
50
Connected
®
《Connecting Tutorial for Android Devices and Zino》
Version 2.0
®

Step 1:
Go to the Settings on your device and go into System
01
Before connecting to the device, Android devices need to be swiched to USB debugging
mode. Take Huawei's phone as an example:

02
Step 2:
Go to "About Phone" and click on "Version Number" then you will see the device is
already in Developer Mode.

Step 3:
Go back to "System" and go to "Developer Options"
03

Step 4:
Turn on the "USB Debugging" Mode.
04

05

（2）Confirm to use the USB in X-Hubsan.
06
√
Step5:
（1）Long press the power button on the transmitter, run the X-Hubsan APP and use the
adapter cable to connect the HT016B transmitter to the mobile device.
For USB connection Mode, use the default "Charging Only" option.

After connecting the devices successfully, the control icon in the APP will change.
Before
After
Not connected
N00.0000000,E000.0000000
45.877503 , -106.123984，65mPitch 0° Yaw 0°Ro ll 0°
Speed 0.0m/s
H: 0.0mD: 0.0m
T: 0%
E: 0%R: 0%
A: 0%
Connected
N00.0000000,E000.0000000
45.877503 , -106.123984，65mPitch 0° Yaw 0°Ro ll 0°
Speed 0.0m/s
H: 0.0mD: 0.0m
T: 0%
E: 0%R: 0%
A: 0%
07

08
c. Opening USB Debugging methods on other Android devices can refer to:
http://www.shuame.com/faq/usb-connect/9-usb.html
Precautions:
a. Be sure to turn on the "USB Debugging" mode on the mobile device. Each device may
have slight difference in opening the debugging mode.
b. "Charge Only" option is preferred. If you cannot connect the devices after multiple
attempts, you may try "Media Devices (MTP)" and wait for the data transfer mode to be
connect again.

Controls
Transmitter connection Bluetooth WIFI
Transmitter firmware version
Transmitter hardware version
Set up transmitter connection to aircraft
Transmitter model
Connect
Scan Aircraft
Refresh
Press refresh to refresh wifi list. Please mak e sure
your phone has connect ed to the air craft.
Hubsan Zino_XXXXXX
Controls
（3） Run the X-Hubsan APP. In the "Settings" on the upper right corner, click "Control".
Select "WIFI" for the transmitter connecting method. Enter "Set up the transmitter with the
aircraft" screen and connect the aircraft.
（4） Refresh the WIFI list, select the WIFI name (such as Hubsan-Zino-XXXXXX) depending
on the product that you are using and click connect. After connecting successfully, you
can control the aircraft accordingly.
Some models of the Android devices may have data transmission restrictions and
cannot be connected. Please consult Hubsan Customer Service Team for analysis.
09

www.hubsan.com