Hunter 44806 User manual

44806 04/02/2008
HUNTERS HIGH VELOCITY FAN
Owner’s Guide
fOr MOdel 90245
ENGLISH
See page 1
ESPAÑOL
Vea la página 9
FRANÇAIS
Consulter la page 17

[2]
44806 04/02/2008
IMPORTANT SAFETY INFORMATION
CAUTION
When using electrical appliances,
basic precautions should always be
taken to reduce the risk of re, electric
shock and personal injury:
1. Read all instructions before using
this fan.
2. Improper assembly may result in
the risk of re, electric shock or
personal injury.
3. The power plug must be removed
from the power socket when not
in use, before cleaning, servicing,
maintenance and before moving
to another location.
4. Place the fan on a at, dry, stable
surface to avoid tipping over.
5. Use fan only for intended use,
as described in this instruction
manual.
6. NEVER insert ngers, pencils
or any other objects through
the grille.
7. DO NOT operate this fan:
• if the cord is damaged
• if the fan malfunctions
• if the fan has been dropped or
damaged in any way
8. To disconnect, grip plug and pull
from wall outlet. NEVER yank on
cord.
9. This product is intended for
garage, worshop, and indoor
residential use only.
10. DO NOT operate fan in the
presence of explosive and/or
ammable fumes.
11. DO NOT place fan or any parts
near an open ame, cooking or
any other heating appliances.
12. DO NOT use near curtains,
plants, window treatments, etc.
13. Never operate the fan if the
grills are not properly installed.
Operating the fan without the
grills could result in serious injury.
14. The appliance is not intended for
use by young children or inrm
persons without supervision.
Young children should be
supervised to ensure that they do
not play with the appliance.
15. This appliance has a grounded
three-prong plug and is suitable
for grounded receptacle use only.
An adapter is available (sold
separately at home improvement
or your local hardware store)
for connecting three-blade
grounding-type plugs to two-slot
receptacles. The adapter must
be properly grounded. DO NOT
attempt to defeat the purpose of
this safely feature.
Read & Save ese Instructions
ENGLISH

[3]
44806 04/02/2008
Please attach your
receipt or a copy of your
receipt to this manual for
future reference.
WELCOME UNPACKING
Thank you for choosing a Hunter
Fan. This manual gives you complete
instructions for using your fan.
Before using your fan, record the following
information for your records and for
warranty assistance.
Model Name ______________________
Date Code ________________________
Date Purchased____________________
Where Purchased __________________
_________________________________
As you unpack the fan, save the carton
and packing materials in case you want to
move or ship the unit in the future.
Carefully remove all items from
the box.
NOTE: It is best to have someone hold
the box while you lift the fan and the
protective packaging out of the carton.
Make sure all shipping materials are
removed from fan before operating.
ENGLISH

[4]
44806 04/02/2008
GROUNDING INSTRUCTIONS
Figure 1B
Figure 1A
WARNING
This unit is suitable for
grounded receptacle use only.
ENGLISH
This appliance is for household use only
and may be plugged into any 120-volt
AC electrical outlet (ordinary household
current). DO NOT use any other type of
outlet.
The power cord has a grounded plug
as shown in Figure 1A. The fan must be
plugged into an electrical outlet that can
accommodate the grounding pin. If your
electrical outlet can not accommodate the
grounding pin, then you must purchase
and install one of the two types of
adapters shown in Figure 1B.
Grounded
Plug
Grounding
Pin
Grounded
Outlet
Grounded
Outlet
Adapter
(Sold Separtely)
Grounding
Means
LINE CORD SAFETY TIPS
1. NEVER pull or yank on the cord or
the appliance.
2. To insert plug, grasp it rmly and
guide it into the outlet.
3. To disconnect the appliance, grasp
the plug and remove it from the
outlet.
4. Before each use, inspect the line
cord for cuts and/or abrasion marks.
If any are found, the appliance
should be serviced and the line
cord replaced. Please return it to
our Service Department or to an
authorized service representative.
5. NEVER wrap the cord tightly around
the appliance, as this could place
undue stress on the cord where
it enters the appliance and could
cause it to fray and break.
6. DO NOT operate appliance if the
line cord shows any damage, if the
appliance works intermittently or
stops working entirely.

[5]
44806 04/02/2008
[a]
[a]
[a]
[a]
[b]
[b]
ASSEMBLY
3. Store the Allen Wrench [a] in the cover
of the electrical box. This wrench
can be used to adjust the tilt / swivel
resistance (see page 6).
1. Remove the 2 Pre-Installed Bolts [a]
of the right end of the unit, with the
included Allen Wrench [b]. The allen
wrench is located inside the electrical
box cover (see gure 3 below).
2. Attach the Wheel Bracket Assembly
[a] using the Longer Bolts [b] provided
in the sack parts and tighten using the
allen wrench provided.
ENGLISH

[6]
44806 04/02/2008
ADJUSTING
TILT /SWIVEL RESISTANCE
1. The cover of the electrical box holds
the allen wrench needed for this
operation (see page 5, step 3).
2. To adjust tilt resistance locate
fasteners on both sides of the fans [b].
• To increase tilt resistance - turn
clockwise.
• To decrease tilt resistance - turn
counter-clockwise.
3. To adjust swivel resistance locate
fasteners along the handle above
each fan [a].
• To increase swivel resistance - turn
clockwise.
• To decrease swivel resistance - turn
counter-clockwise.
OPERATION
[a]
[b] [b][b]
ENGLISH
ELECTRICAL BOX
• Grounded
• Circuit breaker protected with 7A
overcurrent protection [a].
NOTE: If the breaker trips, unplug all
cords and hit the reset button on the side
of the box.
FAN SPEED
1. Each fan can be independtly
operated.
2. Use speed control rotary knob to
control the fans 3 speeds: High,
Medium, and Low.
[a]

[7]
44806 04/02/2008
ENGLISH
TROUBLESHOOTING
®
HUNTER FAN COMPANY
2500 FRISCO AVENUE
MEMPHIS, TN 38114, USA
PROBLEM
• Can not adjust the angle of the fan.
• Fan will not tilt
• Fan will not stay upright.
• Fan will not swivel.
• Fan will not hold horizontal position.
• Electrical box has no power.
SOLUTION
• Loosen the swivel and tilt bolts with
provided allen wrench
• Loosen tilt.
• Tighten tilt.
• Loosen swivel.
• Tighten swivel.
• Reset circuit breaker.
©2008 Hunter Fan Co.
This fan is permanently lubricated and will not require additional lubrication (oil) for the life
of the fan.
This fan requires little maintenance and contains no user serviceable parts. DO NOT try to
x it yourself. Contact qualied service personnel if servicing is needed.
TO CLEAN:
1. Before cleaning, turn the fan off and remove the plug from electrical outlet. Wipe off
excess dust with a lint-free cloth.
2. DO NOT immerse the fan in water or any other liquid.
MAINTENANCE
STORAGE
1. ALWAYS store the fan in a dry place.
2. NEVER store the fan while it is still plugged in.
3. NEVER wrap the cord tightly around the fan.
4. DO NOT put any stress on the cord where it enters the fan, as it could cause the cord
to break.
If you have tried these troubleshooting
solutions and still have trouble, visit our
Website at http://www.hunterfan.com
or call 888-830-1326 for Technical Assistance
from 7 AM to 7 PM Central Time Monday thru
Friday and 8 AM to 5 PM Central Time on
Saturday.