Hunter MD506-01 Product information sheet

www.ventiladoreshunter.com.br
MD506-01 • 09/19/14 • © Hunter Fan Company
ENGLISH

Important Instructions: Keep Instructions for future use

1
www.hunterfan.com.br
MD506-01 • 09/19/14 • © Hunter Fan Company
What to Expect with
Your Installation
PAGE
5
Ceiling Bracket
Table of Contents
PAGE
19
Troubleshooting
?
?
?
PAGE
20
Warranty Statement
Mounting Options
PAGE
4
Congratulations on purchasing your new Hunter®
ceiling fan! It will provide comfort and performance
in your home or ofce for many years. This
installation and operation manual contains complete
instructions for installing and operating your fan.
We are proud of our work and appreciate the
opportunity to supply you with the best ceiling fan
available anywhere in the world.
PAGE
10
Wiring
PAGE
7
Downrod Canopy
PAGE
11
PAGE
6
Assembling the Top
Housing
PAGE
12
Blades
PAGE
13
Light Kit
PAGE
18
Remote Control
PAGE
17
Operation,
Maintenance & Cleaning
Ladder
PAGE
3
Tools Needed
30 inches
7 feet
PAGE
2

www.hunterfan.com.br
2
MD506-01 • 09/19/14 • © Hunter Fan Company
What to Expect with Your Installation
w.1 - To reduce the risk of re, electrical shock, or personal injury,
mount fan directly from building structure and/or an outlet
box marked acceptable for fan support of 31.8 kg and use the
mounting screws provided with the outlet box.
w.2 - To avoid possible electrical shock, before installing or
servicing your fan, disconnect the power by turning off the circuit
breakers to the outlet box and associated wall switch location. If
you cannot lock the circuit breakers in the off position, securely
fasten a prominent warning device, such as a tag, to the service
panel.
w.3 - To reduce the risk of re, electrical shock, or motor damage,
use only Hunter Solid State Speed Controls.
w.4 - To reduce the risk of personal injury, do not bend the blade
brackets when installing the blade brackets, balancing the blades, or
cleaning the fan. Do not insert foreign objects in between rotating fan
blades.
w.5 - This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
people with a lack of experience and knowledge, unless they have
received instructions regarding the use of the device or under the
supervision of a person responsible for their safety.
w.6 - It is recommended that children be supervised to ensure that
they are not using the appliance improperly
c.1 - All wiring must be in accordance with national and local
electrical codes. If you are unfamiliar with wiring, use a qualied
electrician.
c.2 - Use only Hunter replacement parts.
You may need a
friend to help you.
Check box to see
fan weight
Assess location
0,50 meters
from blade tip to
nearest wall or
obstruction 2,3 meters
from bottom
edge of blade to
the oor
Know your wiring
If you are unfamiliar
with wiring, use a
qualied electrician.
This product conforms to UL Standard 507.
WARNINGS
CAUTIONS
Must be able to
secure the fan to
building structure or
fan-rated outlet box.
Do not use a plastic
outlet box.
Select a downrod length
1
2
3
Standard Downrod
for ceilings 2,4 -3 meters high
Shorter Downrod
for fans installed close to ceiling
Longer Downrod
for ceilings 3 meters or higher Use ONLY Hunter
Ceiling Fan branded
accessory light kits.

www.hunterfan.com.br
Tools Needed
Ladder Pliers Wire Strippers Screwdrivers
Power Drill
(optional)
3.5 mm Drill
Bit (optional)
8 mm Drill Bit
(optional)
If mounting to a support structure, you
will also need these tools.
Hammer
(optional)
3
MD506-01 • 09/19/14 • © Hunter Fan Company

www.hunterfan.com.br
Hang your fan by a standard downrod
(included) or use a shorter downrod (sold
separately) for Low-Prole Mounting.
Mounting Options Ceiling Bracket
Note: Do not hang the fan from a
ceiling that is angled greater than 34°
Support
Structure
Ceiling
Outlet Box
(required)
Angled
Mounting
Style
Standard
Mounting
Style
Support
Structure
Ceiling
Outlet Box
(required)
Carefully choose the installation location
that allows for optimal air ow.
The support structure must be able to support 5
times the weight of the fan. The weight of the fan is
located on the product packaging.
You will need a longer downrod (sold
separately) to hang the fan from a
vaulted or angled ceiling.
If you have a at ceiling: If you have an angled ceiling:
Make sure all four (4) bumpers
are still attached.
For angled ceilings, point
opening toward peak.
OFF
Turn Power
4
MD506-01 • 09/19/14 • © Hunter Fan Company

5
www.hunterfan.com.br
MD506-01 • 09/19/14 • © Hunter Fan Company
Ceiling Bracket (continued)
Refer to warning w.1 on pg. 2
To avoid possible electrical shock, before
installing your fan, disconnect the power by
turning off the circuit breakers to the outlet
box associated with the wall switch location.
Use wood screws
(included) when securing
to support structure with
approved electrical outlet
box. Drill 3.5 mm pilot
holes in support structure
to aid in securing ceiling
bracket with hardware
found in the hardware
bag.
Use machine screws
(provided with outlet
box) when securing to
existing ceiling fan-rated
outlet box. Make sure
it is securely installed
and is acceptable for fan
support of 31.8 kg or less.
Note: Do not mount ceiling fan
to a plastic outlet box.
Use concrete anchors (included)
when securing to support structure
with approved outlet box in a concrete
ceiling. Drill 8 mm pilot holes in
support structure. Hammer the M6
expansion anchors into the holes until
the ends are ush with the ceiling.
Install the washer, isolator, and nut
found in the hardware bag to
the expansion anchors.

6
www.hunterfan.com.br
MD506-01 • 09/19/14 • © Hunter Fan Company
Assembling the Top Housing
KEEP!
Remove the pre-installed
setscrew so that the downrod
can be inserted.
K
E
E
P
!
Install three upper motor
cover screws, found in the
hardware bag, and tighten
them securely.
Upper Motor
Cover Screw
To assemble the housing to the
hanger adapter, align the three
raised tabs on the hanger adapter
with the three narrow notches in
the top housing. Make certain the
housing sits at on the adapter.

7
www.hunterfan.com.br
MD506-01 • 09/19/14 • © Hunter Fan Company
Downrod
Slide
Slide
1 2 3 4 5
678910
Sold Separately
Longer
Downrod
for angled
ceilings or
ceilings 3 m or
higher
Shorter
Downrod
for fans installed
close to ceiling
Standard
Downrod
for ceilings 2,4-3 m
high
Option 1Option 2
Option 3
skip to next page
If you need a different downrod length follow these steps:
Steps 1-5 to remove standard downrod pipe
Steps 6-10 to reassemble with new pipe
Included (pre-assembled)
Sold Separately

8
www.hunterfan.com.br
MD506-01 • 09/19/14 • © Hunter Fan Company
20 cm
1 cm
C
U
T
&
S
T
R
I
P
(not to scale)
The wires can be cut, but leave at
least 20 cm extending from the top
of the downrod.
Downrod (continued)
If the setscrew is not tightened
securely, the fan may fall.
20 cm 1 cm
Hand tighten the downrod (at least 4-5 full
turns) until it stops.
Tighten the setscrew with pliers.
DO NOT HAND TIGHTEN.

9
www.hunterfan.com.br
MD506-01 • 09/19/14 • © Hunter Fan Company
Downrod (continued)
DO NOT PICK THE FAN UP BY THE CANOPY
OR WIRES. Place the downrod ball into the slot
in the ceiling bracket.
Put the wires and downrod through the canopy.
Let the canopy sit loosely on top of the fan.

10
www.hunterfan.com.br
MD506-01 • 09/19/14 • © Hunter Fan Company
Wiring
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box.
Refer to CAUTION c.1 on pg. 2
Using an orange wire
connector from
the hardware bag,
connect the 3 grounding
wires (green, green/
yellow stripe, or bare
copper) coming from the
ceiling, downrod, and
hanging bracket.
(Grounding) Green/Yellow
Stripe
Green/Yellow
Stripe
Note: To connect
the wires, hold the
bare metal leads
together and place a
wire connector over
them, then twist
clockwise until tight.
Using the orange wire
connectors from the remote
control hardware bag,
connect the blue wire from
the receiver to the black
with white stripe wire from
the fan. Connect the yellow
wire from the receiver to the
brown wire from the fan.
Using the orange wire
connectors from the
hardware bag, connect the
brown wire (ungrounded)
from the ceiling to the
black wire from the
receiver. Connect the blue
wire from the ceiling to
both the white wire from
the receiver and the blue
wire from the fan.
black with white stripe
brown
blue yellow
F
R
O
M
C
E
I
L
I
N
G
F
R
O
M
F
A
N
F
R
O
M
R
E
C
E
I
V
E
R
brown blue
black white
blue
F
R
O
M
F
A
N
F
R
O
M
R
E
C
E
I
V
E
R
F
R
O
M
C
E
I
L
I
N
G
B
R
A
C
K
E
T
F
R
O
M
C
E
I
L
I
N
G
F
R
O
M
F
A
N

11
www.hunterfan.com.br
MD506-01 • 09/19/14 • © Hunter Fan Company
Canopy
Note: Fan style may vary.
Lift the canopy into place so that
the screw holes are aligned.
Position the canopy so that, when
lifted into place, the canopy ts into
the hanging bracket as shown.
Insert the two canopy screws
found in the hardware bag.
Screw
Holes

12
www.hunterfan.com.br
MD506-01 • 09/19/14 • © Hunter Fan Company
Blades
Your blades are shielded with Dust Armor® which
is a nanotechnology coating that repels dust. For
cleaning the fan, use soft brushes or cloths to prevent
scratching. Cleaning agents may damage the nishes.
Attach the blade to the motor using the at
washers from the hardware bag and blade
assembly screws found in the hardware bag.
Repeat for each blade.
Insert blade into slot. Align the holes on the
blade with the holes in the fan motor.
Holes

13
www.hunterfan.com.br
MD506-01 • 09/19/14 • © Hunter Fan Company
Light Kit
Align the keyholes in the light kit
with the two partially installed
screws and turn the light kit
clockwise until the screws are in the
narrow ends of the keyholes.
Thread the 9-pin plug connector from the
fan through the light kit.
Attachment Screw
Partially install two attachment
screws, found in the hardware
bag, into the light kit mounting plate.

14
www.hunterfan.com.br
MD506-01 • 09/19/14 • © Hunter Fan Company
Light Kit (continued)
Make sure the light kit is securely attached to the mounting
plate. Failure to properly secure all three assembly screws
could result in the light xture falling.
Thread the 2-pin connector through the
wire slot in the the switch housing.
Wire Slot
Install the remaining attachment
screw to secure the light kit to the
mounting plate. Securely tighten all
three screws.
Attachment Screw
Connect the upper 9-pin plug connector
from the fan to the lower 9-pin plug
connector in the light kit.

15
www.hunterfan.com.br
MD506-01 • 09/19/14 • © Hunter Fan Company
Light Kit (continued)
Connect the the 2-pin plugs from the
switch housing and the LED assembly.
Push excess wiring into the switch
housing through the wire slot.
Align the two screw screw holes and
install the switch housing assembly
screws, found in the hardware bag.
Wire Slot
Attach the LED assembly to the
switch housing by installing two light
assembly screws, found in the
hardware bag, through the slots, not
the screw holes.
Light
Assembly
Screw

16
www.hunterfan.com.br
MD506-01 • 09/19/14 • © Hunter Fan Company
CONGRATULATIONS!
YOU’RE DONE!
See next page for fan
operation instructions.
Glass Globe
Trim Ring
Globe
Assembly
Screw
Light Kit (continued)
Place the glass globe into the globe trim ring.
Align the three holes in the trim ring with
the three holes in the light kit. Install and
securely tighten all three globe assembly
screws, found in the hardware bag.
16

17
www.hunterfan.com.br
MD506-01 • 09/19/14 • © Hunter Fan Company
Remote Control
Within 3 minutes of restoring power
to the fan, press both the Fan Off
button and the High button for at
least 4 seconds. Your fan will turn on
low to indicate successful syncing.
If it does not, turn off power to your
fan, wait 1 minute then try again. If
using the transmitter with multiple
fans, repeat this process for each fan.
Note: The remote must be paired
before the fan will operate.
Fan Off
High
Rocker- Style
Plate
Switch Cover
Plate
Removed
Tabs
To install the transmitter cradle, remove
the two screws holding the switch
cover plate. Do not remove the cover
plate. Orient the cradle by lining up
the two mounting holes with those on
the cover plate. Insert and tighten the
screws. Do not over tighten.
Note: For rocker-style cover plates,
break off the tabs by pushing outward.
To turn on fan, press a fan speed
button. Speeds range from off (0)
to high (3). Quickly press the Light
button to turn the lights off and on.
Medium
Speed
Light
High
Speed
Fan
Off
Low
Speed
ON
Turn Power
To access the battery compartment,
remove the small Phillips head screw
that secures the battery door to the
transmitter assembly. The battery
should be installed with the positive
(+) side up. Replace with a CR2032
battery when necessary.
Phillips
Head
Screw
Battery
Door

18
www.hunterfan.com.br
MD506-01 • 09/19/14 • © Hunter Fan Company
For cleaning the fan, use soft brushes or
cloths to prevent scratching. Cleaning
products may damage the nishes.
Operation, Maintenance, & Cleaning
To switch the direction of air ow, remove
the globe on the fan by removing the globe
assembly screws, the glass, and trim ring. Flip
the black switch to change the direction.
• Press the Fan Off button for at
least three seconds to initiate the
Safe-Exit Mode.
• The lights will ash for visual
conrmation.
• The lights will stay on 50%
brightness for 15 seconds and
then begin to dim. After a total
of 30 seconds, the lights will be
completely off.
Note: For CFL lighting, the lights
will stay on 100% brightness for 30
seconds. After a total of 30 seconds,
the lights will be completely off.
The Safe-Exit Program gives
you about thirty seconds of light
when you turn the lights off to
exit the room before the lights go
out.To use Safe-Exit:
Safe-Exit
Reverse
Switch