HURTLE HURVBTR35BT User manual

Thank you for your purchase of this product. To ensure proper
operation of the Product, please read this USER MANUAL ca-
refully before using, and pay special attention to the safety pr-
ecautions.
Please keep this USER MANUAL properly for further reference.
Contents
Safety Precautions………………………………………………… 1-2
Name and Function of the Product……………………… ……… 3
Name and Function of Controller………………………………… 4
Using Method…………………………………………………………5
Moving Method……………………………………………………… 6
Cleaning and Maintenance…………………………………………
Common Problems and Solutions…………………………………
Technical Specification………………………………………………
7
8
9

Safety Precautions
Environmentfor use
Do not use the Product in humid or dusty environment to avoid electric
shock or breakdown of the mechanical parts.
Do not use the Product when indoor temperature is over 40℃.
Do not use the Product in the oper air or under the direct sunlight.
Please the Product on flat floor.
Please wait for one hour before using the Product when it is moved
from low to high temperature,so as to prevent water vapor from con-
densing on the machine and resulting in any failure.
People under these conditions below are not suggested to use the
Product
It is strongly advised to consult your doctor before use
Patients who are under treatment or feel not good;
Patients with malignant tumor;
Pregnant women or women in menstrual period;
People with heart disease;
Osteoporosis patients;
People with heart pacemaker or other medical electronic instrument
implanted;
People with artificial limb;
People who are sensitive to vibration and strenuous exercise.
Notices during Operation
Before use,please undress watch,bangle,cell phone or other valua-
ble objects,and keys,knife or other incisive objects,soas to avoid da-
mage or body injury.
Do not smoke while using the Product.
Please do not use the Product together with other medical equipments.
Please do not use the Product for medical treatment purpose.
Do not use the Product right after a meal or drink.
During use,please keep child or pet away from the Product.It is forbid-
den to put fingers or other foreign bodies into the gap between the mid-
dle cover and base cover.
Supervision is needed for child under 10 years and the aged over 60
years during using the Product.
The load capability of the Product is 100KGS;people over this weight
are not suggested to use the Product.
This product is only limited for one-person use.
1
8
Technical Specification
Product name:：Ultrathin body slimmer
Rated voltage：□110-120VAC
Rated power：200W
Rated frequency：50/60Hz

Warning:
Unauthorized dismantle,disassembly or renovation is not allowed to
prevent electrical shock or any malfunctions. Please contact manuf-
acture or local dealer immediately if there is any service work needed.
Stop using the Product under the Product under below conditions, then
power off and remove the plug from power supply
Water or other liquid is accidentally splashed onto the Product or con-
troller.
Any accessory is found damaged or internal component is exposed
Feel abnormal or severe pain during use.
Power failure.
Thundering or lighting weather.
Plug and power cord
Check if the voltage complies with the one specified for the Product.
Do not retract the power plug with wet hand to prevent electric shock.
Hold the plug rather than the power cord to pull out the power cord.
Turn off the power switch and remove the plug from the power supply
in case of electrical failure of not in use for a long time.
Stop using the Product if the power cord has any damage,turn off the
ower switch,pull out the plug,and contact technicians for repair.
27
S/N Problems Causes Solutions
The plug is not in place Insert the plug
The power switch is off Turn switch on, the
indicator
1 The Product can
not be started
Th fuse is burnt Replace with a new fuse
of the same mode!
2
Sound like phew
or Da-da is heard
during working
Normal sound generated by the
motor or from the abrasion
between mechanical units
No additional treatment
is required
The electricity of batteries is
worn out Replace batteries
3
Operate the
controller, but the
Product no action The controller is too far away
from the Product
The effective distance of
infrared signal is 2.5M
4 Sudden stop Default working time is up Restart it after 10
minutes’ interval
5 Can not operation
Too many commands sent to
the Product and they can not be
responded in time
Power off and then
restart
Common Problems & Solutions:

3
6
Time/Program/Window
POWER
Time / Volume Plus Minus 、
Infrared Receiving Window Speed Window
Speed / Song Addition、 Subtraction
Prg Mode START/STOP MUSIC
Upper Cover Rubber Pedal
Foot Pad AC Socket Base Cover
Middle Cover
Storage and Maintenance
Surface cleaning
Before cleaning, ensure the power switch is turned off, and the
attaching plug is pulled out of the socket
The rubber pedal and covers can be cleaned with a wet cloth
containing detergent, and the detergent should be removed with a
cloth
Notice
Do not clean the Product with corrosive detergent such as benzene
or thinner, as it may cause fading, corrosion or crack on the Product.
Do not splash water into the Product to avoid short circuit.
Controller
As wet cloth may cause malfunction of the controller, only dry cloth
can be used
Storage and Maintenance
Make sure that the power switch is turned off and the plug is removed
from the power supply
Clean off the dust and dirt on the Product and keep it clean and away
from places with high temperature or high humidity
If the Product is not in use for a long period, a dustproof cover (buy it
yourself) should be applied on the Product to prevent the entry of dust
Remarks:
When press "MUSIC" button, you can press"TIME/VOLUME"
button to increase or decrease the volume of music; you can
press"SPEED/MUSIC" button to choose previous or next track.
Then press "MUSIC" button one more time, you can press
"TIME/VOLUME" button to increase or decrease the time;
you can press"SPEED/MUSIC" button to increase or decrease
the speed.