Hussmann IMPACT RL User manual

NOTES: Acrylic partitions are most
often used in a line-up to separate
cases with different refrigeration
defrost cycles, and are installed as
cases are joined. Joining instructions
are provided separately.
Be sure merchandisers have been
leveled according to the installation
instructions. Carefully unpack and
inspect the acrylic partition and
components to ensure there is no
breakage or damage.
1Remove items from case as shown in Figure 1.
A. Remove bumpers, rails, packing
materials, and splashguards from the
case.
B. Remove shelves (if installed).
C. Remove display racks and pans
from end to be joined.
D. Remove back panels by lifting
up and out near the bottom. No tools
are necessary.
1
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
P/N 0332429A
October, 2002
Acrylic Partition
for
Reach-In Merchandisers
Field Installation Instruction
Merchandisers
®
PARTS LIST
Item Quantity Description
1. 1 Retainer, Top Left
2. 6 Screw, #8 x
1/2
3. 1 Acrylic Partition
4. 1 Retainer, Top Right
5. 10 Machine Screw, 1/4-20 x 1/2
6. 20 Flat Washer 1/4
7. 10 Hex Nut, Locking 1/4-20
8. 1 Retainer, Bottom Left
9. 1 Retainer, Bottom Right
10. 1 Retainer, Top Front Left
11. 1 Retainer, Top Front Right
12. 1 Retainer, Closeoff
Figure 1. Remove Parts
B
A
CC
D

2Position the Top Left Retainer — 1
against the edge of the interior
top panel of left case as shown
in Figure 2. Fasten with
Screws — 2.
Note: A factory-installed acrylic
partition may have a retainer
attached to the back end frame
and partition. It is not used in
field installations.
P/N 0332429A
Merchandisers
®
2HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Interior
Top
Panel
of Left
Case
2
1
1
2
Figure 2. Install Top Retainer

3Loosely fasten the Acrylic Partition —3 and
Top Right Retainer —4
to the Left Top Retainer using
Screws —5,
Washers —6, and
Locking Nut —7
as shown in Figure 3, Detail A.
4Fasten the Top Right Retainer —4
to the interior top panel of right
case using Screws —2.
Acrylic Partition for Reach-In
Installation Instruction P/N 0332429A
3
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
DETAIL A
Interior
Top
Panel
of Left
Case
Interior
Top
Panel
of Right
Case
SEE
DETAIL
A
1
3
4
56
7
6
Figure 3. Install Partition

5Position the Bottom Left Retainer —8
and
Bottom Right Retainer —9
at the bottom of the partition
and around both end frames as
shown in Figure 5. Fasten with
Screws —5,
Washers —6, and
Locking Nut —7 as shown in
Figure 5.
P/N 0332429A
Merchandisers
®
4HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
SEE
DETAIL
A
DETAIL A
Partition
9
Partition
965
7
8
6
8
Left
Case
Right
Case
Figure 4. Install Bottom Brackets

6Position the Top Front Left Retainer —10
and Top Front
Right Retainer —11
at the top of the partition as
shown in Figure 5. Fasten with
Screws —5,
Washers —6, and
Locking Nut —7.
Fasten the top of the retainer
with the cap screw used to join
the cases.
Acrylic Partition for Reach-In
Installation Instruction P/N 0332429A
5
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
7
6
6
11
Partition
10
76
5
6
Cap Screw
from
Joining Kit
Figure 5. Install Top Front Retainers

7Position the Closeoff Retainer —12
at the bottom of the partition as
shown in Figure 6. Fasten with
Screws —5,
Washers —6, and
Locking Nut —7.
Return to the joining instruction for
fastener tightening sequence, joint
molding installation and other steps
necessary to complete lineup.
P/N 0332429A
Merchandisers
®
6HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Partition
Installed
5
6
12
6
7
Figure 6. Install Closeoff Retainer