Hyco Aquilo AQ100LC Specification sheet

Product Instruction Manual
Aquilo
AQ100LC
Ladder style towel rail
Version 3.2 Jan 2015
V15.5
Aquilo_Layout 1 19/05/2015 13:54 Page 1

2
hank you for purchasing the Hyco Aquilo towel rail. he Aquilo has a stylish
and modern curved ladder design and is suitable for use in bathrooms to
provide dry, warm towels. Please read and understand these instructions
before commencing installation, and leave them with the user when
installation is complete.
1. Impo tant safety points
he Electrical installation must be carried out by a qualified electrician in
accordance with the current edition of the I.E.E. Wiring Regulations.
his appliance must be earthed.
Means for electrical disconnection must be incorporated in the fixed wiring
in accordance with the wiring rules.
Only connect the unit to a single phase supply with a mains voltage as
specified on the rating plate.
Do not carry the appliance by the supply cord.
he supply cord cannot be replaced by the user. If the cord is damaged the
appliance should be returned to the manufacturer or an authorised service
agent for replacement.
he appliance must not be located immediately below an electrical socket outlet.
his appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
In order to avoid a hazard for very young children, this appliance should
be installed so that the lowest heated rail is at least 600mm above the floor.
his appliance is intended only for drying textiles washed in water
Aquilo_Layout 1 19/05/2015 13:54 Page 2

3
2. Installation
Wall Mounting
Ensure that the surface selected for mounting the appliance is suitable
for the weight of the product.
In order to avoid a hazard for very young children, this appliance should
be installed so that the lowest heated rail is at least 600mm above the floor.
• Select a suitable location for the towel rail.
• Assemble the wall brackets to the back of the towel rail. Ensure the bolt is
tightened sufficiently so that the circular plate is firmly held and cannot rotate.
• Hold the towel rail against the intended mounting surface and decide upon the
final installation position.
• Drill a single hole for the upper right bracket, insert a wall plug and loosely attach
the rail to the wall.
110mm
500mm
645mm
110mm
500mm
645mm
Aquilo_Layout 1 19/05/2015 13:54 Page 3

4
• Mark and drill a single hole again for the upper left bracket. Insert a wall plug
and loosely fix to the wall.
• Mark the remaining six holes before removing the unit and drilling. Insert wall
plugs in all holes before replacing the rail and finally screwing securely all fixing
points.
Elect ical
his appliance must be earthed.
Means for electrical disconnection must be incorporated in the fixed wiring
in accordance with the wiring rules.
• he power cord should be connected following the colour coding below:
➢Brown: L
➢Blue: N
➢Green / Yellow: E
110mm
500mm
645mm
Aquilo_Layout 1 19/05/2015 13:54 Page 4

5
3. Ope ation
his appliance is intended only for drying textiles washed in water.
4. Maintenance
Always isolate the appliance from the power supply before commencing
any maintenance.
Never use abrasive chemicals or materials to clean the hand dryer.
• Clean the exterior of the unit using a soft, damp cloth.
Aquilo_Layout 1 19/05/2015 13:54 Page 5

110mm
530mm
860mm
6
5. Specifications
Voltage 230v~50Hz
Power 100W
IP Rating IPx4
Weight 2.9kg
Aquilo_Layout 1 19/05/2015 13:54 Page 6

7
6. Gua antee and se vice policy
his product is guaranteed against faulty materials and manufacture for a period of one
year from the date of purchase. Hyco will in its sole discretion replace, repair or refund
any faulty unit. Incorrect installation and failure to follow correct operating instructions
are excluded. Consequential costs such as labour charges or damage to surroundings
are expressly excluded.
Aquilo_Layout 1 19/05/2015 13:54 Page 7

hyco.co.uk
Hyco Manufacturing Ltd
Normandy Court
Express Way
Castleford, WF10 5NR
01924 225 200
F 01924 225 210
E [e-mail]
INFORMA ION FOR CORREC DISPOSAL OF HE PRODUC IN ACCORDANCE WI H HE
EUROPEAN DIREC IVE 2002/96/E.
At the end of its working life this equipment must not be disposed of as household
waste. It must be taken to a local authority waste collection centre or to a dealer
providing this service. Disposing of electrical and electronic equipment separately
enables its components to be recovered and recycled to obtain significant savings in
energy and resources. In order to underline the duty to dispose of this equipment
separately, the product is marked with a crossed out dustbin.
Aquilo_Layout 1 19/05/2015 13:54 Page 8