HYPERVOLT Go 2 User manual

Let’s
get
started

Meet your new
Hypervolt Go 2
Head attachment
Grip / handle
Battery level indicator
(LED band)
Speed indicators (3)
Power (ON/OFF) /
speed setting button
Charging port
Side view
Rear view

Before you start
Download the Hyperice App
Get the most out of your Hypervolt Go 2, or any Hyperice device
with the Hyperice App. Follow along to guided routines, track
your progress, and get tips and tricks from the world’s best pros.
Register your device
Activate your warranty and ensure easy returns, repairs,
or refunds at hyperice.com/register-product.

Charge your new Hypervolt Go 2
Plug in your new Hypervolt Go 2 with the provided Hyperice
USB-C until fully charged. The battery will take up to four
hours to full charge.

Powering up
Turn your Hypervolt Go 2 ON by
pressing the power/speed setting
button. Hold for two seconds until
the battery level indicator (LED
band) illuminates, then release.
Choosing head
attachments
Choose desired head attachment
and insert directly into the
opening while pushing firmly.
Start your session

Please read the Operating Instructions before first use.
Recharging
Full charge is indicated when
the LED light band on the
handle remains green and
fully illuminated. Only use the
provided Hyperice charger.
Adjusting speeds
Choose your desired speed (1-3)
by pressing the power/speed
setting button once per speed.
The white lights on the back will
indicate the current speed.
Caring for your
Hypervolt Go 2
Make sure the power is OFF
and the battery charger is not
attached. Use a damp, clean cloth
to gently wipe your device. Store
in a clean, cool, dry place, out of
direct sunlight, when not in use.

170-00337 Rev 1
1.855.734.7224
hyperice.com
[email protected]
HyperCare®
Get award-winning support from our HyperCare
team – a group of specialists dedicated to your overall
well-being and expert guidance on Hyperice products.
We’re here for you
If outside of the United States, please visit hyperice.com/contact