Hyundai power products HYM510SPEZ User manual

PETROL LAWNMOWER
HYM510SPEZ
Instruction Manual

This manual has been produced by Hyundai Power Products and should be kept with the
product. Please read and understand these instructions before you use your product. Failure to
do this may result in personal injury or damage to the product.
The safety precautions and warnings are to ensure your safety and protect you from harm or
damage to the product.
The information contained in this manual was accurate at the time of production, however
HYUNDAI Power Products may make modifications to the product without notification.
Introduction
We work very hard to give all of our customers the best possible service.
If you have any problems, before leaving negative feedback, please contact
us to give us a chance to resolve the issue.
We would be delighted if you left us positive feedback!
Thank you for purchasing this product.
Thank You For Purchasing Your HYUNDAI Product
For Inquires, Please Contact:
Trade Tested Limited
PO Box 9117, Newmarket, Auckland 1149, New Zealand
0800 800 880
[email protected]
www.tradetested.co.nz
Licensed by Hyundai Corporation, Korea
Imported/Distributed by Trade Tested Limited
Licensed by Hyundai Corporation, Korea
Imported/Distributed by Trade Tested Limited

Contents
Maintenance And Care..........................................28-40
Safety...............................................................28
Maintenance Schedule....................................29
Checking Your Machine..................................29
Checking Oil Level...........................................30
Filling Fuel Tank..............................................30
Changing Oil....................................................30
Emptying Fuel Tank…………………………….31
Drain Carburettor Float Bowl..........................31
Spark Plug.......................................................32
Air Filter...........................................................33
OPC Cable Adjustment ..................................34
Drive Cable Adjustment...................................35
Blade Maintenance..........................................36
Cleaning...........................................................37
Storage............................................................38
Transportation & Handling..............................39
Recycling & Disposal.......................................40
Environmental Protection................................40
Specification................................................................41
SpareParts...................................................................42
Mowing Tips................................................................43
General Tips....................................................43
How Oftem Should I Mow?.............................43
What Time Should I Mow?..............................43
How Does Mulching Work?............................43
Features.........................................................................4
What’s In The Box.........................................................4
Symbols On The Machine.............................................5
General Safety..........................................................6-15
Understand Your Machine................................6
Personal Safety..............................................6-7
Inspect Your Machine....................................7-8
Engine Safety.....................................................8
Work Area..........................................................9
During Use.......................................................10
Carbon Monoxide............................................11
Noise................................................................11
Fuel Safety..................................................12-13
Electrical Safety...............................................13
Batteries..........................................................14
Vibrations.........................................................14
Personal Protective Equipment.......................15
Getting Started.......................................................16-17
Getting To Know The Machine........................16
Assembly Safety..............................................17
Unboxing.........................................................17
Assembly................................................................18-20
Handlebar Assembly........................................18
Grass Collector Assembly...............................18
Cable Attachment.......................................19-20
Preparing The Lawnmower..........................................21
Adding Oil........................................................21
Adding Fuel.....................................................21
Using The Lawnmower...........................................22-23
Grass Collection..............................................22
Mulching Mode................................................22
Cut And Drop..................................................23
Adjusting Cutting Height.................................23
Adjusting Front Wheels...................................23
Starting Procedure.................................................24-25
Before Each Use..............................................24
Starting The Engine....................................24-25
Stopping Procedure....................................................26
After Each Use................................................26
Stopping Procedure........................................26
Removable Button...........................................26
Troubleshooting...........................................................27
Licensed by Hyundai Corporation, Korea
Imported/Distributed by Trade Tested Limited
Licensed by Hyundai Corporation, Korea
Imported/Distributed by Trade Tested Limited

Features
• HYM510SPEZ Lawnmower
• Grass Collector
• User Manual
What’s In The Box
4
Drive Control Lever
Handlebar
Choke & Throttle Control
Fuel Filler Cap
Air Filter
Spark Plug
Exhaust
Central Cutting
Height Adjuster
Oil Filler / Dipstick
Grass Collector
Recoil Starter
Handle
OPC (Operator Presence Control) Lever
Electric
Start Button
Self-Propel
Speed Control
Front Wheel Lock
Licensed by Hyundai Corporation, Korea
Imported/Distributed by Trade Tested Limited

5
INSTRUCTION MANUAL
Read and understand operator’s
manual before using the machine.
Failure to follow instructions could
result in death or serious injury.
Symbols On The Machine
SAFE DISTANCE
Keep people at a safe distance
while working.
REMOVE SPARK PLUG
Remove the spark plug cable
from the spark plug and read
instructions before carrying out
any repair or maintenance.
DANGER
Blades in movement. Do not put
hands or feet near or under the
opening of the cutting plate.
DO NOT USE ON SLOPES
Do not use on hills above 20°.
WARNING
Stop the engine before cleaning
of work area.
KEEP BYSTANDERS AWAY
Keep bystanders, especially
children away.
WARNING
Always use correct tools and
original spare parts.
WARNING
The blade is sharp, do not touch the
blade.
We have provided safety messages in this manual and on the lawnmower. This information
alerts you to potential hazards that could hurt you or others. Please read these messages
carefully. However, we may not have listed all of the possible hazards, you must also use your
own judgment.
WEEE SYMBOL
Waste electrical products should
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your local
authority or local store for
recycling advice.
DANGER
Danger of thrown objects.
WARNING
Do not touch the rotating parts.
Licensed by Hyundai Corporation, Korea
Imported/Distributed by Trade Tested Limited

General Safety
6
WARNING : READ THE INSTRUCTION BOOKLET THOROUGHLY BEFORE
USING THE MACHINE. Keep for future reference and pass it on if the machine
is loaned or sold to another user.
!
• WARNING! You must read these
instructions carefully before operating the
machine. Make sure that you are familiar with
the controls and properly operate the
machine. You must learn how to stop the
machine quickly. If you do not follow the
warnings and instructions, it may result in fire
and/or serious injury. Make sure to save all
warnings and instructions for future reference.
•Read this manual and labels affixed to the
machine to understand its limitations and
potential hazards.
•Be thoroughly familiar with the controls and
their proper operation. Know how to stop the
machine and disengage the controls quickly.
•If the unit is to be used by someone other
than original purchaser, or is to be loaned,
rented, or sold, always provide this manual
and any needed safety training before
operation. The user can prevent and is
responsible for accidents or injuries that may
occur to themselves, to other people, or to
property.
•Do not force the machine beyond its limits.
Use the correct machine for your application.
•Know how to stop the engine quickly in
case of emergency. Understand the use of all
controls.
•ALL MAINTENANCE other than that listed in
this manual, should be carried out by
professionally trained and certified personnel.
Understand Your Machine Personal Safety
• WARNING! Never allow children or people
unfamiliar with these instructions to use the
product. Local regulations can restrict the
minimum age of the operator.
•Keep children, pets, and other people not
using the unit away from the work area. Be
alert and shut off the unit if anyone enters
work area. Keep children under the watchful
care of a responsible adult.
•Stay alert, watch what you are doing and
use common sense when operating the
machine. Never operate the machine when
unwell or tired, or if you have taken alcohol,
medicine, drugs or any substances which may
slow your reflexes and compromise
judgement. A moment of inattention while
operating the machine may result in serious
personal injury.
•Appropriate Personal Protective Equipment
(PPE), MUST be worn at all times when
operating or repairing the machine. Always
wear anti-slip and resistant work footwear and
long trousers while using the machine. Do not
use the machine when barefoot, wearing
sandals or similar lightweight footwear. Do not
wear chains, bracelets or clothing that is loose
fitting or hanging ties or cords. Tie long hair
back. Always wear protective earplugs. Loose
clothes, jewellery, or long hair can be caught
in moving parts. Protect eyes, face, and head
from objects that may be thrown from the unit.
Always wear safety goggles or safety glasses
with side shields when operating.
•Always keep hands and feet away from all
moving parts during operation. Moving parts
can cut or crush body parts.
!!
Licensed by Hyundai Corporation, Korea
Imported/Distributed by Trade Tested Limited

7
General Safety
•Always keep hands and feet away from all
pinch points.
•Do not touch parts that might be hot
from operation. Allow parts to cool before
attempting to maintain, adjust, or service.
•Do not overreach. Keep proper footing and
balance at all times. This enables better
control of the machine in unexpected
situations. Extending your body too far can
result in a loss of balance and you may fall
which will result in injury.
•Never place any part of your body where it
would be in danger if movement should occur
during assembly, installation, and operation,
maintenance, repairing or moving.
•Start the engine carefully according to
instructions and with feet away from the
moving parts.
•Do not place your hands or feet near or
under rotating parts. Keep away from any
discharge openings.
•Keep in mind that the operator or user is
responsible for accidents, hazards or
unexpected events involving the machine that
occur to other people or their property. It is
the responsibility of the user to assess the
potential risk of the area where work is being
carried out. The operator or user must take
all necessary precautions to ensure their own
safety and that of others, especially on slopes
or rough, slippery and unstable ground.
•Always keep a safe distance from the
rotary blade, given by the length of the handle.
Inspect Your Machine
• Check your machine before starting it. Keep
guards in place and in working order. Make
sure all nuts, bolts, etc., are securely
tightened.
•You must check the general condition of the
machine before use.
•Never operate the machine when it is in
need of repair or is in poor mechanical
condition. Replace damaged, missing, or
failed parts before using it. Check for fuel
leaks. Keep the machine in safe working
condition.
•Do not use the machine if the engine’s
switch does not turn off the engine when
running. Any petrol powered machine that
can’t be controlled with the engine switch is
dangerous and must be replaced.
•Regularly check to see that keys and
adjusting wrenches are removed from the
machine area before starting it. A wrench or
a key that is left attached to a rotating part of
the machine may result in personal injury.
•Avoid accidental starting. Be sure the
engine’s switch is off before transporting the
machine or performing any maintenance or
service on the unit. Transporting or performing
maintenance or service on a machine with its
switch on invites accidents.
•If the machine should start to vibrate
abnormally, stop the engine and check
immediately for the cause. Vibration is
generally a warning sign of trouble.
•Do not tamper with or disable safety
systems.
•Only use manufacturer-recommended
attachments.
!
Licensed by Hyundai Corporation, Korea
Imported/Distributed by Trade Tested Limited

General Safety
8
Engine Safety
•This machine is equipped with an internal
combustion engine. Do not use on, or near,
forest-covered or brush-covered land unless
the exhaust system is equipped with a spark
arrester meeting applicable local, state, or
federal laws.
• A spark arrester, if used, must be maintained
in effective working order by the operator.
• Never start or run the engine inside a closed
area. The exhaust fumes are dangerous,
containing carbon monoxide, an odorless and
deadly gas. Operate this unit only in a
well-ventilated outdoor area. (See carbon
monoxide safety).
• Do not tamper with the engine in an effort to
get it to run at higher speeds. The maximum
engine speed is preset by the manufacturer
and is within safety limits.
• Keep a fire extinguisher on hand when
operating this machine in dry areas as a
precautionary measure.
!
•Before using, always visually inspect to see
that the tools are not worn out or damaged.
Replace worn out or damaged elements and
bolts in set to preserve balance.
•Keep all nuts, bolts and screws tight to
ensure the equipment is in safe working
condition.
•Keep the machine in good operating
condition. Operating a machine in poor or
questionable condition could result in serious
injury.
•Be sure all safety devices are in working
order and warning labels are in place. These
items are installed for your safety.
•Be sure the safety covers are in place.
•Never leave the operating position when the
engine is running.
•The engine parts get very hot when
running, do not touch. Danger of burns.
•Follow the instructions to ignite the engine
carefully whilst keeping feet away from moving
parts.
•Never incline the machine during ignition.
Ignite the machine on a flat surface without
obstacles or high grass.
•Do not over-rev the engine or change the
engine settings.
•Never pick up or carry the machine while the
engine is running.
•Stop the engine whenever you leave the
machine, or before refuelling, when cleaning
or while maintaining.
•Reduce the throttle setting during engine
shut down and, if the engine is provided with a
shut-off valve, turn the fuel off at the
conclusion of working.
•Do not tilt the lawnmower when starting the
engine.
•Start the engine carefully according to
instructions and with feet well away from the
blade.
•Before stopping the engine, reduce the
throttle setting, if applicable.
Licensed by Hyundai Corporation, Korea
Imported/Distributed by Trade Tested Limited

9
General Safety
•Make sure you thoroughly inspect the entire
work area and remove all objects and anything
that could be thrown by the machine or could
damage the engine or machine (branches,
stones, wire, toys, etc). Attempting to clear the
work area whilst using the machine will reduce
your concentration and creates a trip hazard.
Any liquid spilled on the floor may result in you
slipping.
•You must only work in daylight or with good
artificial light in good visibility conditions. Keep
people, children and animals away from the
working area.
•Operate on flat, level ground.
•Avoid mowing wet grass if possible. If there
has been heavy rain on the working site, wait
until the ground has dried up.
•Never park the machine in a place with
unstable ground which could give way.
•You must pay special attention when
approaching obstacles that could compromise
visibility.
•When mowing on slopes, you must mow
across the slope and not up and down it.
When changing direction, you need to be
careful that the wheels do not hit any
obstacles (such as roots, branches, stones,
etc) that can cause the lawnmower to slide
sideways or make you lose control of it.
•The lawnmower must never be used on
slopes of over 20°, regardless of the mowing
direction.
•You must be careful near ravines, ditches or
embankments.
•Exercise extreme caution when operating on
or crossing gravel drives, walks, or roads. Stay
alert for hidden hazards or traffic.
Work Area
!•Find and locate all fixed objects in the
ground, such as sprinkler systems, poles,
water valves, bases for washing lines etc
Make sure that you check for hidden
electrical cables or similar on the surface of
the lawn. ALWAYS run the machine around
these objects. NEVER intentionally run the
machine over foreign objects.
•Pay the utmost attention when working on
frozen ground as the machine may tend to
skid.
•Do not work in the rain and when there is a
thunderstorm or lightning risk. If there is bad
weather conditions, do not use the machine.
•Make sure on slopes you have a steady
foothold.
Licensed by Hyundai Corporation, Korea
Imported/Distributed by Trade Tested Limited

General Safety
10
During Use
•Always hold the unit with both hands when
operating. Keep a firm grip on the handlebars.
Be aware that the machine may unexpectedly
bounce upward or jump forward if the
machine should strike buried obstacles such
as large rocks or roots.
•Walk, never run with the machine.
•Use extreme caution when in reverse or
pulling the machine towards you.
•Do not operate the machine in confined
areas where there may be a risk of crushing
the operator between the machine and
another object.
•Be very careful when pulling the
machine toward you. You must look behind
you to make sure there are no obstacles
before and during operations in reverse gear
(if applicable).
•Do not allow the machine to pull you along,
you must walk and never run.
•Before leaving the machine to clear
blockages, check, clean, refuel or after
striking foreign object, stop the engine and
make sure that the blades have come to a
complete stop.
• WARNING! If something breaks or an
accident happens whilst working, you must
turn off the engine immediately and move the
machine away to prevent further damage. If
an accident happens with injuries or third
parties are injured, carry out the first aid
measures most suitable for the situation
immediately and contact the medical
authorities for any necessary health care.
Carefully remove any debris that might cause
damage or harm persons or animals should it
not be seen.
!•The excessive speed of movement or the
absence of maintenance have a significant
influence on noise emissions and vibrations.
It is necessary to take preventive steps to
eliminate possible damage due to high levels
of noise and stress from vibration. You must
maintain the machine well, wear ear protection
and take breaks from working.
•Keep a firm hold on the handlebars, they
may tend to lift during clutch engagement.
•If the lawnmower is running, do not lift or
transport.
•If the attachments/tools are not installed in
their seats, do not use the machine.
•Stop the engine before emptying the grass
collector or before you change the cutting
height.
•Disengage the wheel drive before starting
the engine on power-driven models.
•You must disengage the blade, switch off
the engine and unplug the spark plug cable
(making sure that all moving parts are
stationary):
- Before refuelling
- Whenever you remove or attach the grass
collector
- Before adjusting the cutting height
- After striking a foreign object, you must
inspect the machine for damage and make
repairs before using it again.
- Before checking or working on the machine
- Before clearing blockages or unclogging the
discharge chute
- When transporting the machine
- Whenever you leave the machine
unattended; also remove the key on models
with electric ignition systems
Licensed by Hyundai Corporation, Korea
Imported/Distributed by Trade Tested Limited

General Safety
11
Never operate the engine in a confined space
where dangerous carbon monoxide fumes
can develop. All ignition operations have to be
effected in an open or well-ventilated area.
Always remember that exhaust fumes are
toxic.
The symptoms of carbon monoxide poisoning
can include but are not limited to the
following; Headaches, dizziness, nausea,
breathlessness, collapsing or loss of
consciousness.
Carbon monoxide poisoning symptoms are
similar to flu, food poisoning, viral infections
and simply tiredness. It is quite common for
people to mistake this very dangerous
poisoning for something else.
To avoid carbon monoxide poisoning DO NOT
use Petrol/Diesel powered equipment inside
any of the following; Home, garage, tent,
camper van, mobile home, caravan or boat.
DO NOT use in an enclosed area or moving
vehicle. This is not exhaustive and if you are in
any doubt contact your dealer.
CARBON MONOXIDE IS A COLOURLESS,
ODOURLESS GAS. INHALING THIS GAS
CAN CAUSE DEATH OR SERIOUS
LONG-TERM HEALTH PROBLEMS SUCH
AS BRAIN DAMAGE.
DANGER!
!
Carbon Monoxide
DANGER
!If you think you have or someone around you
has been affected by carbon monoxide
poisoning; Get them fresh air immediately,
by leaving the affected area or by opening
doors and windows. If safe and practical to do
so make sure that the machine is turned off.
DO NOT enter a room you suspect of having
carbon monoxide present – instead call the
emergency services.
Contact a Doctor immediately or go to
Hospital – let them know that you suspect
carbon monoxide poisoning.
• The operating noise of the machine can
damage your hearing. Wear hearing protection
such as earplugs or ear defenders to protect
your hearing. Long-term and regular users are
advised to have hearing checked regularly. Be
especially vigilant and cautious when hearing
ear protection because your ability to hear
alarm warnings will be reduced.
• Noise emissions for this equipment is
unavoidable. Carry out noisy work at
approved times and for certain periods.
Limit the working time to a minimum. For your
personal protection and protection of people
working nearby it is also advisable for them to
wear hearing protection.
• See Certificate of Conformity section
for Outdoor Noise declaration of conformity.
Noise (Where Applicable)
!
Licensed by Hyundai Corporation, Korea
Imported/Distributed by Trade Tested Limited

General Safety
12
General Fuel Safety
ALL FUELS ARE HIGHLY FLAMMABLE AND
PETROL VAPOUR IS EXPLOSIVE. TAKE
EXTREME CARE WHEN HANDING FUEL.
KEEP FUEL OUT OF REACH OF CHILDREN.
CAUTION!
!
General Safety
• Do not smoke each time fuel is handled.
• ALWAYS avoid inhaling fumes.
• ALWAYS carry fuel in the correct and clearly
marked container.
• ALWAYS wear correct, suitable and fit for
purpose Personal Protective Equipment (PPE),
suggested items are but not limited to safety
gloves, overalls.
• To avoid sparking or arcing, keep grounded
conductive objects – such as tools – away
from exposed, live electrical parts and
connections. These events could ignite fumes
or vapors.
• Do not operate the machine with known
leaks in the fuel system.
• Fire hazard - keep fuel away from all
sources of ignition for example heaters,
lamps, sparks from grinding or welding.
• DO NOT carry out hot work on tanks that
have contained fuel.
• ALWAYS keep the work area tidy.
• ALWAYS dispose of waste fuels correctly.
General Safety
Spilled Fuel
•If you have spilled fuel, make sure you do
not attempt to ignite the engine but move the
machine away from the area of spilled fuel and
avoid creating any source of ignition until the
fuel has evaporated and fuel vapours have
dissipated.
• When fuel is spilled on yourself or your
clothes, wash your skin and change clothes
immediately.
• ALWAYS clean up spills promptly using
absorbent granules and a lidded bin.
Fueling / De-Fuelling
• ALWAYS fuel and de-fuel in a well
ventilated area outside of buildings. Use a
funnel to add fuel, only outdoors. Do not
smoke during this and each time fuel is
handled.
• Add fuel before igniting the engine, never
remove the fuel tank cap or add fuel whilst the
engine is running or when it is hot.
• When de-fueling ALWAYS use a proper fuel
retriever.
• Never overfill the fuel tank. Because engine
heat can cause fuel to expand, never fill the
tank to more than 1/2” below the bottom of
the filler neck. This will provide space for fuel
expansion.
• When refilling or draining the fuel tank, use
an approved fuel storage container while in
a clean, well-ventilated outdoor area. While
adding fuel or operating the unit, do not
smoke, and stay away from sparks, open
flames, or other sources of ignition near the
area of operation.
Spilled Fuel
Fueling / De-fueling
Licensed by Hyundai Corporation, Korea
Imported/Distributed by Trade Tested Limited

General Safety
13
• Always stop the engine and allow it to cool
before filling the fuel tank. Never remove
the cap of the fuel tank or add fuel while the
engine is running or when the engine is hot.
• Loosen the fuel tank cap slowly to relieve
any pressure in the tank.
•ALWAYS keep the handles dry, clean and
free of oil and fuel.
Storage
• Make sure to store fuel in special containers.
• Store fuel in containers specifically designed
and approved for fuel storage.
• Store fuel in a cool, well-ventilated area,
safely away from sparks, open flames, or
other sources of ignition.
• Never store fuel – or a machine with fuel in
the tank – inside a building where fumes may
reach a spark, open flame, or any other source
of ignition (such as a water heater, furnace, or
clothes dryer). Allow the engine to cool before
storing in any enclosure.
• Replace all fuel tank and container caps
securely and wipe up spilled fuel. Never
operate the unit without the fuel cap securely
in place.
Storage
• Prior to carrying out any maintenance work
you MUST identify electrical isolation methods
and isolate all electrical supplies.
• Prior to use and with all electrical supplies
isolated, you MUST check all electrical cables,
plugs and connectors for the following;
• Are intact and have no signs of damage, to
include but not limited to bare wires, chaffing,
cuts and loose wiring.
• If there are any signs of damage, the
damaged item MUST be taken out of service
until the damage has been repaired by an
electrically competent person.
• All trailing cables should be routed so as not
to cause any kind of trip hazard.
• NEVER work on or near electricity with wet
hands, wet clothing and wet gloves.
Electrical Safety (Where
Applicable)
ELECTRICITY CAN KILL – NEVER WORK
ON LIVE/ENERGISED EQUIPMENT.
DANGER!
!
Licensed by Hyundai Corporation, Korea
Imported/Distributed by Trade Tested Limited

General Safety
14
Batteries (Where Present)
Batteries present a risk if they become
damaged by the possible leaking of
electrolyte. This electrolyte is an acid and can
cause serious burn injuries. Care should be
taken when working on or near them. NOTE
the electrolyte may be in a liquid or gel form.
Should you come in to contact with electrolyte
you should;
• Remove all clothing contaminated with
electrolyte. If you cannot remove then saturate
them in water.
• Get medical assistance as soon as possible.
You must advise the medical staff of the type
of acid.
• Lead/acid battery = dilute sulphuric acid.
• Nickel/cadmium = potassium hydroxide
alkali electrolyte.
• Use fresh running water to wash off excess
electrolyte, continue this until medical assis-
tance arrives. Make sure that you do not was
the electrolyte to another part of your body or
face.
• If electrolyte comes in to contact with Eyes
the electrolyte needs to be immediately
washed away with large amounts of water.
Make sure that you do not wash the electro-
lyte to another part of your face or body.
• Gasses from charging batteries are highly
flammable and great care should be taken to
charge in well ventilated areas.
• There is an explosion risk if the battery
terminals are short circuited, when
connecting/disconnecting ALWAYS exercise
great care so that the terminals or battery
leads are NOT allowed to touch and cause a
spark. ALWAYS use suitable insulated tools.
Vibrations (Where
Applicable)
• Prolonged use of hand held (operated)
machines will cause the user to feel the effects
of/from vibrations. These vibrations can lead
to white finger (Raynaud’s phenomenon) or
carpal tunnel syndrome. This condition
reduces the ability of the hand to feel and
regulate temperature, causing numbness and
heat sensations and may cause never damage
and circulatory tissue death.
• Not all factors that lead to white finger
disease are known, but cold weather, smoking
and other diseases that affect blood vessels
and blood circulation as well as large and
long-lasting impact of shocks are considered
factors in the formation of white finger. Note
the following to reduce the risk of white finger
and carpal tunnel syndrome;
• Wear gloves and keep your hands warm.
• Take regular breaks.
• All of the above precautions may help
reduce the risk of white finger disease but not
rule out the carpal tunnel syndrome.
Long-term and regular users are therefore
recommended to observe the condition of
your hands and fingers. Seek medical
attention immediately if any of the above
symptoms should occur.
!!
Licensed by Hyundai Corporation, Korea
Imported/Distributed by Trade Tested Limited

15
General Safety
HAND PROTECTION MUST BE WORN
Protective electrically non-conductive gloves are highly recommended when working.
HEARING PROTECTION MUST BE WORN
Suitable safety hearing protection is recommended.
EYE PROTECTION MUST BE WORN
Always wear safety glasses/goggles and/or face shields. Everyday eyeglasses have
only impact resistant lenses; they are not safety glasses/goggles.
FOOT PROTECTION MUST BE WORN
Non-skid heavy duty footwear are highly recommended when working.
PROTECTIVE CLOTHING MUST BE WORN
Do not wear loose clothing, gloves, scarfs, neckties or jewellery
(rings, wrist watches), which can be caught in moving parts.
HEAD PROTECTION MUST BE WORN
Wear a safety helmet with a safety visor.
FACE SHIELD MUST BE WORN
Wear a face shield to protect your face.
RESPIRATOR MUST BE WORN
Wear a respirator.
Personal Protective Equipment
Appropriate Personal Protective Equipment (PPE), MUST be worn at all times when
operating or repairing the machine. No protective equipment can ensure 100%
protection.
When selecting PPE, make sure it’s CE marked and it suits the user in terms of size, fit etc. If
more than one item of PPE is worn at the same time, make sure they can be used together, eg
wearing safety glasses may disturb the seal of a respirator, causing air leaks.
!
Licensed by Hyundai Corporation, Korea
Imported/Distributed by Trade Tested Limited

16
General Safety
Getting To Know The Machine
The HYM510SPEZ is a petrol powered rear
wheel drive, self-propelled, electric push
button start lawnmower from HYUNDAI,
ideally suited for medium to large sized lawns.
The HYM510SPEZ has a cutting width of
508mm and is powered by a 196cc 4-stroke
OHV petrol engine.
The lawnmower is a garden tool and precisely
a pedestrian controlled lawnmower. The
machine is essentially composed of an engine
which drives a blade enclosed in a casing,
equipped with wheels and a handle. The
operator is able to operate the machine and
use the main controls, always staying behind
the handle at a safe distance from the rotating
blade. If the operator leaves the machine, the
engine and cutting means will stop within a
few seconds.
The lawnmower is manufactured according to
the latest safety requirements. These include
a blade brake that stops the engine and blade
when you let go of the OPC lever. Every
precaution is only effective when it is followed
exactly.
Intended Use
This machine was designed and manufactured
for cutting and collecting grass in gardens and
grassy areas, in areas in proportion to its
cutting capacity, controlled by a pedestrian
operator.
The presence of attachments or specific
devices can prevent cut grass from being
collected or produce a mulching effect,
depositing cut grass on the ground.
User Types
This machine is intended for use by
consumers, i.e. non professional operators.
The machine is intended for “DIY” and
domestic use only.
Improper Use
Any other usage not in keeping with the above
mentioned ones may be hazardous and harm
persons and/or damage things. Examples of
improper use may include, but are not limited
to:
- transporting people, children or animals on
the machine
- letting yourself be transported by the
machine
- using the machine to tow or push loads
- using the machine for leaf or debris
collection
- using the machine to trim hedges, or cutting
anything other than grass
- use of the machine by more than one person
- using the blade on surfaces other than grass
For full specification, go to page 41 or visit
www.hyundaipowerproducts.co.uk
Licensed by Hyundai Corporation, Korea
Imported/Distributed by Trade Tested Limited

Getting Started
17
Assembly Safety
CAUTION - This guide is meant to serve
as a quick reference for operating your
HYUNDAI machine. We always advise reading
the manual in full before operation.
CAUTION - For OUTDOOR use ONLY.
Petrol machines produce carbon monoxide
– a poisonous, colourless and odourless gas
that can cause serious injury or death. Petrol
is highly flammable, always handle with
extreme care and in a well ventilated area.
NOTE - Images may vary depending on
model. The mulching plug may already be
installed for transport.
NOTE - The machine can be supplied with
some parts already assembled. Prior to
assembly, check all items have been received.
NOTE - This machine is shipped without
fuel and oil and MUST be filled before use.
Failure to do so may cause damage to the
engine that will not be covered by warranty.
!
!
!
!
!
As soon as you have purchased your
machine, we recommend that you fill out
the information on page 46. If you need to
contact an authorised dealer or customer
service for information on servicing, you
may need to provide this information.
There is also a service record so you can
keep track of your machine service dates.
!
Unboxing
WARNING! Unboxing and assembling
the machine should be done on a flat, stable
surface with enough room. Disposal of the
packaging should be done in accordance with
the local regulations in force.
Carefully remove the product from the
packaging and examine it for any sign of
damage caused during shipping. Lay the
contents out and check them. If any part is
damaged or missing, you must not use the
machine. Contact HYUNDAI Power Products
immediately. You must keep the packaging
material in case the machine needs to be
returned or repaired.
WARNING! Some of the packaging
material may be harmful to children. Keep out
of reach of children.
!
Licensed by Hyundai Corporation, Korea
Imported/Distributed by Trade Tested Limited

Assembly
18
Handlebar Assembly
STEP 1
Attach the base of the handle to the mower
and tighten bolts securely.
STEP 2
Attach the upper handle to the lower handle
and tighten bolts securely.
STEP 3
Slowly pull the recoil cord and thread it
through the cord loop.
STEP 4
Attach the centre control panel.
Grass Collector Assembly
STEP 1
Clip the plastic edges of the bag onto the
frame and attach the clips as shown. The
grass collector comes with a handy
indicator showing whether the collector is full
and needs emptying.
When indicator is up - grass collector is empty
When indicator is down - grass collector is full
Indicator
Licensed by Hyundai Corporation, Korea
Imported/Distributed by Trade Tested Limited

Assembly
19
Cable Attachment
NOTE - If you are stood behind the
lawnmower:
OPC Cable: This attaches to the lever in front
of the main handlebar and if followed, will
attach to the engine.
Drive Cable: This attaches to the lever behind
the main handlebar and if followed, will enter
the deck of the lawn mower behind the
engine.
STEP 1
Follow the cable you want to attach and
determine which lever it will attach to.
STEP 2
Gently prise the lever inwards from its locating
hole in the main handlebar.
STEP 4
Position the cable until it lies flat in the lever.
STEP 3
Insert the end of the cable in to the location
hole on the lever.
STEP 5
Refit the lever back into its location hole on
the main handlebar.
Continued
Licensed by Hyundai Corporation, Korea
Imported/Distributed by Trade Tested Limited

Assembly
20
STEP 6
Check the cable lies flat and has not snagged
on any other part of the lawnmower.
NOTE - It is necessary as part of
routine maintenance to adjust the OPC
cable and drive cable tension to ensure the
lawnmower will start and self-propel
correctly.
If there is more than 10mm movement in the
OPC or drive levers before the cable begins to
move, then the cable will require adjustment.
Go to pages 34-35 for more information.
!
Licensed by Hyundai Corporation, Korea
Imported/Distributed by Trade Tested Limited