Hyundai HWE3IN1 User manual

ELECTRIC WEED BURNER
HWE3IN1
WARNING: Read thoroughly the instruction manual before use

CONTENTS
1. INTENDED USE.............................................................................3
2. SAFETY INSTRUCTIONS.............................................................3
3. THE PRODUCT..............................................................................8
4. OPERATION...................................................................................9
5. CLEANING ...................................................................................12
6. DISPOSAL....................................................................................12
7. DECLARATION OF CONFORMITY..............................................12
8. WARRANTY..................................................................................13
9. PRODUCT FAILURE....................................................................14
10. WARRANTY EXCLUSIONS.......................................................15
02

1. INTENDED USE
The appliance is intended to be used to remove weeds
from paving, flowerbeds and lawns during the growing
season, and to light grills, it also can be used as a hot air
gun.
• Do not use the appliance for any other purpose than
the one it is designed for.
• The appliance must only be used as it is intended to be
used and in accordance with these instructions. All other
use is considered to be unsuitable.
• Incorrect use, inadequate maintenance and/or
unauthorized use of the appliance can result in serious
personal injury and/ or material damage.
• The manufacturer cannot accept liability for personal
injury or material damage resulting from improper use.
2. SAFETY INSTRUCTIONS
2.1 GENERAL SAFETY WARNINGS
Read all warnings, safety instructions and other
directives carefully before use. Failure to follow all the
instructions and safety instructions can result in the risk
of electric shock, fire and/or serious personal injury.
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
03

If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
A fire may result if the appliance is not used with care,
therefore:
– be careful when using the appliance in places where
there are combustible materials;
– do not apply to the same place for a long time;
– do not use in presence of an explosive atmosphere;
– be aware that heat may be conducted to combustible
materials that are out of sight;
– place the appliance on its stand after use and allow it
to cool down before storage (if provided);
– do not leave the appliance unattended when it is
switched on.
Ensure that the tool is properly positioned;
Unplug the tool before removal from the fire;
Allow the tool to cool before storage;
Do not allow the hot parts of the firelighter to touch the
cord or other flammable materials.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
04

protected supply. Use an RCD reduces the risk of
electric shock.
Do not use the power tool if the switch does not turn it on
and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
Have your power tool serviced by a qualified repair
person using only original replacement parts. This will be
ensuring that the safety of the power tool is maintained.
2.2 SAFETY INSTRUCTIONS FOR THE HOT AIR
BLOWER
Careless use of the appliance can cause a fire.
Take care when using the appliance in the vicinity of
inflammable materials.
Do not aim at the same place for a prolonged period of
time.
Do not use in the presence of an explosive
atmosphere.
Heat can be transferred to combustible materials
which are hidden from view.
Replace on stand after use and allow to cool before
putting it away.
Do not leave the appliance unattended while it is in
operation.
2.3 SAFETY INFORMATION FOR SOLID FUEL
LIGHTERS
Check that the solid fuel lighter is in the correct
position.
Disconnect from mains before removing from fire.
05

Allow solid fuel lighter to cool down before packing
away.
The power cable or other flammable materials may
not come into contact with hot components of the solid
fuel lighter.
2.4 SAFETY INFORMATION FOR WEED BURNER
Do not hold the nozzle too close to the work area. If
the air gets too hot this can damage the weed burner.
Careless use of the weed burner can cause a fire.
Always check the plants that have been treated once
more after use. The treatment can result in smoldering,
which in time can burst into flame and burn out of
control.
Pay special attention if the weed burner is used in the
vicinity of flammable materials, liquids, gases or dust.
Do not point the jet of hot air at the same spot for a
long time.
Do not use the weed burner in explosive
environments.
Heat can be transferred to flammable materials that
are not visible.
2.5 ADDITIONAL SAFETY INSTRUCTIONS
CAUTION! Avoid the risk of injury or fire as well as
health risks:
In case of danger, remove the plug from the socket
immediately.
CAUTION! RISK OF INJURY!
Never use the appliance as a hair dryer.
06

Never aim the hot air stream at people or animals.
Never look directly into the nozzle opening at the outlet.
CAUTION! RISK OF BURNS!
Do not touch the hot nozzle.
Wear protective gloves.
Wear safety goggles.
Always remove the plug from the power socket during
work breaks, when adjusting the appliance (e.g.
changing nozzles) and when it is no longer in use.
Allow it to cool completely before replacing the nozzle.
Keep the nozzle at a distance from the work the work
piece or the area being processed. A build-up of hot air
can result in damaged to the appliance.
The appliance must always be kept clean, dry and free
from oil or grease.
Never use the appliance for purposed other than the
ones for which it was designed.
2.3 SYMBOLS
Conforms to relevant safety standards
To reduce the risk of injury, the user must read and understand this manual
before using this product.
Class II product.
Do not dispose of old appliances with domestic rubbish
07

3. THE PRODUCT
3.1 DESCRIPTION
1. Weed burner nozzle
2. ON/OFF &temperature adjust switch
3. Tube connector
4. Handle
5. Cable clamp
6. Plug
7. Rotary button
8. Support
9. Spatula nozzle
10. Flat nozzle
11. Reducer nozzle
12. Grill lighter nozzle
3.2 PACKAGE CONTENTS
1 3in1 multi - function weed burner
1 Tube
1 Handle
1 Support
1Spade-shaped nozzle
1 Flat nozzle
1 Reducer nozzle
1 Grill lighter nozzle
1 Manual
3.3 TECHNICAL DATA
Model
HWE3IN1
Voltage
220-240V~
Mains frequency
50-60Hz
Power
2000W
Air temperature
I: 80°C II: 650 °C
Air stream
550 l/min
08

4. OPERATION
CAUTION! Do not cover the ventilation slots during use.
CAUTION! RISK OF BURNS! Do not touch the hot nozzle.
Switching the appliance on:
Make a loop on the extension cord, push it through the strain relief on the handle and hook it onto the hook.
Connect the appliance to a suitable power point with the extension cord.
Start the appliance by pressing the main ON/OFF switch(2) into "II" position. Full working temperature is
reached after about 1 minute
Switching the appliance off:
Move the main ON/OFF switch (2) into "O" position.
Unplug the plug from the power point after use.
Place the appliance with the stand on a level, non-flammable surface, and allow all the hot parts to cool.
Setting temperature:
You can set temperature by moving the temperature adjust switch (2) into "I"\'II' position.
Depending on the application, you can select the most suitable temperature (nozzle outlet):
Level I: approx. 80℃
Level II: approx. 650℃
Turn the working head
The working head is rotary. You can press the rotary button (7) and turn it.
4.1 USE AS A HOT AIR GUN
WARNING!
► Before changing the nozzle, you must ensure that the nozzle has cooled to avoid burns.
► Excessive heat can ignite paints and plastics.
CAUTION! ► Do not inhale any vapour.
Choose the most suitable hot air gun working angle by press the rotary button (7).
Using nozzles (9), (10), (11) for different purpose.
09

Spatula nozzle (9) – removing paints or varnish:
♦ Attach the spatula nozzle(9)to the outlet .
♦ The spatula shape of the nozzle is designed for targeted hot air delivery. Use it together with a separate
spatula to remove paint and coatings.
Flat nozzle (10) – separating glued joints, softening paints:
♦ Attach the flat nozzle(10) to the outlet .
♦ Avoid prolonged exposure to heat as burnt paint can be very difficult to remove. Many adhesives can be
softened with heat. The glued joints can be separated and excess glue removed.
Reducer nozzle (11) – welding plastics:
♦ Attach the reducer nozzle to the outlet .
♦ Use the reducer nozzle with heat-shrinkable tubing and films.
4.2 USE AS A WEED BURNER
WARNING!
► Before changing the nozzle, you must ensure that the nozzle has cooled to avoid burns.
► Excessive heat can ignite paints and plastics.
CAUTION! ► Do not inhale any vapour.
Assemble the extension tube for weed burner function.
The removal of weeds has the best effect early on during the growing phase.
The best time for treatment is during the spring.
The treatment has most effect on young plants. It may not be immediately obvious that the treatment
has been effective. The visible part of the plant can burn up during long exposure.
Plants do not react immediately to the radiation of heat during the recommended treatment time.
As a rule young plants with soft leaves are most sensitive and do not survive after the treatment.
10