i-box Slix 79198R User manual

USER GUIDE
Slix
SPLASHPROOF BLUETOOTH® SPEAKER
79198R & 79199R
Features
The Slix Bluetooth speaker can be paired to another Slix speaker to give true wireless left/right stereo
sound.
Other features include:
• IPx5 Splashproof rating
• Up to10 hours battery life
• Connection via Bluetooth or AUX 3.5mm jack input
• Super-slim design with 2 x 1.5” speakers and passive subwoofer (6 Watts RMS output power)
• Hands-free speakerphone function.
1 52 3 4 6
1. Power on/off
2. Press to return to previous track(s)
3. Answer phone call/Play/Pause
4. Press to forward to next track(s)
5. Volume -
6. Volume +
7. AUX - IN
8. Micro USB charging port
9. Charging indicator LED
10. STATUS LED
Controls and connections
Fig. 2Fig. 1
• Weight: 201g per unit
• Dimensions: 155 x 53 x 28mm
• Advanced audio distribution profile (A2DP)
for wireless music streaming
• Hands-free audio (HFA) and Headset profiles
(HSP) for hands-free calling
• 10m (30 feet) wireless range
• Charging time: 3-4 hours
• Play time: up to 10 hours
• Battery voltage: 3.7 volts
• Input: 5V/500mA
• Max output power: 6 Watts RMS
• Bluetooth v2.1
Specifications
1
7
8
9
10

1. Press and hold down the power button on the Slix for 3 seconds, the LED will flash red/blue
indicating the Slix is ready to pair.
2. Search, and select “i-box Slix” on your source device.
3. Once paired the STATUS LED (10 in Fig. 2) will show a constant solid blue light.
If a constant solid blue STATUS LED light is displayed when first powering on the Slix it has
automatically paired to the last connected device.
To un-pair the previous connected device tap the Power button twice. Turn the speaker off and
on again.The STATUS LED will now flash red/blue indicating the Slix is ready to pair again.
1. Press and hold down the Power button on the first Slix for 3 seconds. The LED will flash blue/blue
to indicate the Slix is ready to pair, repeat this process on the second Slix.
2. Press the Play/Pause button twice on both Slix. The STATUS LEDs will flash fast blue/blue and you
will hear audible notification to indicate that both Slix are in the process of pairing with each other.
3. After a few moments the speakers will pair (this may take up to 30sec).
You only need to pair the two Slix speakers together once. After this they will remember each other
unless reset.
4. Press and hold down the Play/Pause button for 3 seconds on one Slix to enter pairing mode with
your Bluetooth device. Search, and select “i-box Slix” on your source device.
5. Once paired with the Bluetooth device the master Slix will display solid blue STATUS LED and
second Slix will show a slow flashing blue/blue STATUS LED.
6. The master Slix can control power and volume functions of the second Slix simultaneously.
If a constant solid blue STATUS LED light is displayed when first powering on the Slix it has
automatically paired to the last connected device.
To un-pair the previous connected device tap the Power button twice. Turn the speaker off and on
again.The STATUS LED will now flash red-blue indicating the Slix is ready to pair again.
Charging
(3.7V 1200mAh rechargeable battery built-in)
1. Turn off the speaker before charging
2. Plug the micro USB end of the USB charging cable (supplied) into the micro USB port (8 in Fig. 2)
marked “USB CHARGE” on the end of the speaker.
3.
Plug the other end into a USB Power port such as a plug in mains charger (not supplied), laptop or PC
4. The LED charging indicator (9 in Fig. 2) next to the micro USB port on the end of the speaker
will illuminate red while charging and turn off when fully charged.
2
Bluetooth device setup for Slix (single unit)
Bluetooth device and stereo setup for Slix2(twin pack)
1. When there is an incoming call, touch the Phone symbol (3 in Fig. 1) once to answer via speaker
and the built in microphone (the music will immediately stop playing).
2. Touch it again to end a call (the music will re-start automatically).
3. When there is no call incoming, the Phone symbol (3) will work as Play/Pause to control music.
Touch to start music, touch again to pause.
Hands-free: Answering a phone call via the speaker

Website: www.iboxstyle.com
AUX IN connection to an audio device using the 3.5mm audio cable supplied
1. Switch off the speaker, connect the 3.5mm cable supplied to the AUX IN socket (7) and to the
headphone socket on your audio source device. Press and hold down the power button on the Slix
for 3 seconds, the STATUS LED will turn to red indicating it is using AUX IN.
2. The volume when connected via AUX IN is controlled solely by the source device, adjust volume on
your source device to the required level.
PLEASE NOTE: The speaker will not be splashproof when connected via the AUX IN socket.
1. The sound is low or completely silent.
1.1 Make sure both your audio device and the speaker are charged.
1.2 Make sure the connection (either Bluetooth or AUX IN) is fully functioning and secure.
If you are using the AUX IN socket check the cable connectors are inserted properly into both
the speaker and your audio device.
1.3 Check that the volume on your audio device is turned up.
1.4 Check that your audio device is playing an audible music track.
2. The pairing instructions in this manual do not work for my device.
2.1 Please consult the user guide for your audio device to find the correct pairing instructions.
3. The source cannot find the Slix.
3.1 Ensure the Bluetooth is switched on and not hidden on your audio device.
3.2 Make sure that the speaker is not paired to another device (is the blue STATUS LED flashing).
If it is already paired (the blue STATUS LED is on continuously), then tap the Power button
twice. Turn the speaker off and on again. The STATUS LED will now flash red-blue indicating the
Slix is ready to pair again.
4. The person on the other end of my call cannot hear me or I cannot hear him / her.
4.1 Make sure your device is paired correctly to the speaker.
4.2 Make sure the volume is turned up on the phone.
4.3 Make sure there is no obstruction to the microphone.
WARNING:
This speaker has a built in lithium polymer battery, it must be used and charged properly.
Improper use can cause the battery to catch fire or explode resulting in serious or fatal injury.
CAUTION:
Do not disassemble or modify the speaker.
Do not place the speaker in direct sunlight, or near fires, stoves, or other high temperature locations.
The speaker is IPx5 rated “splashproof in all directions”but do not immerse the speaker in water or
expose to salt water.
Make sure the socket cover is fully closed before exposure to water or damp.
If you dispose of the speaker remember it contains a lithium battery and recycle accordingly.
Troubleshooting
Waste electrical and electronic products should not
be disposed of with household waste. Please recycle
where facilities exist. Check with your Local
Authority for recycling advice. © Philex Electronic Ltd. 2015 v1
3