i3-TECHNOLOGIES i3TOUCH E1055 4K User manual

Interactive Touch Display
User’s Manual
i3TOUCH E1055 4K
i3TOUCH E1065 4K
i3TOUCH E1075 4K
i3TOUCH E1086 4K

11
14
15
Contents
Safety Warning & Statements
Connection and Setting
Menu Operation
Maintenance
Prepare to Install
Simple Troubleshooting
7
2
1

Safety Warning
Placement
Do not place the unit on an unstable cart, stand, tripod, bracket, table, or shelf.
Do not expose the unit to direct sunlight and other sources of heat.
Do not put the unit near appliances that generate magnetic fields.
Do not put any liquid near or on the unit, make sure do not spill any liquid inside the unit.
Do not put heavy objects on top of the unit.
Power Supply
Check that the unit’s operating voltage is identical with your local power supply.
Please unplug power supply and antenna plug when the weather is thunder-storm or lightning.
Please unplug power supply, when there is nobody home or the unit will be in idle for a long time.
Please keep power cable from physical or mechanical damage.
Please use the original power cable from the accessory bag, don't modify or lengthen it.
Please check and ensure AC source is connected with the ground.
This power cable comes with the device exclusively for this device only.
LED Screen
Never use any other hard or sharp object to replace the touch pen.
Unplug the power cable before cleaning.
Clean the screen with a soft, dustless and dry cloth.
Never use water or the spray type detergent to clean the unit.
For deep clean, please contact an authorized service center.
Better for the panel lifetime and the display performance, do not display high brightness image for long time.
Temperature
Do not place the unit near or over a radiator or a heater.
If your unit is suddenly moved from a cold to a warm place, please unplug the power cable and do not turn it on at least 2 hours,
making sure the moisture inside the unit is all evaporated.
Normal operating temperature is 0 ~ 40℃.
Humidity
Do not expose the unit in rain, or place in high humidity area.
Please make sure indoor environment is dry and cool.Normal operating humidity is 10%~90%RH.
Ventilation
Please put the unit in a well ventilated place, so the heating can be released easily.
Ensure that the unit has enough space for ventilation. Space requirement: left, right and back >10cm, top> 20cm.
Earphone
Using the earphone to listen loud sound for a long time might effect the hearing.
Before using earphone, please turn down the volume in advance.
Standby
It will enter standby mode but not turn off the unit after press the standby key.
Battery
Please make sure the battery get proper disposal or recycle after using.
Please keep the battery away from kids and don't throw the battery into fire.
Notes for Cleaning
There are vents on back cover, please do not use any liquid or spray directly during cleaning.
Power Switch Status Signs
“I” means power on, “O” means power off.
Notes for Maintenance
tive only. If there is inconsistency between the image and the actual
product, the actual product shall govern.

1. Control Panel
Prepare to Install
2
Installation Connecting and SettingMenu Operation TroubleshootingCare Maintenance
HOME button: back to main interface
Return button: return to previous level menu
Menu button: call up function menu
Volume down button: turn down volume
Volume up button: turn up volume
Items Function description
Tap to enter EnergySaving function
Press at least 2 seconds to enter standby mode

2. Terminal Interface
3
Installation Connecting and Setting Menu Operation Troubleshooting Care Maintenance
Items Function description
Connect USB devices such as mobile hard disk, U disk, USB keyboard
and mouse, USB drives, etc.
External computer audio input
External computer image input
Touch signal output to the external computer
Composite video and audio input
Coaxial output
Connecting RJ45 terminals
Serial interface, used for mutual transfer of data between devices
AC power input, connecting AC power supply
LAN
USB
HDMI IN
AUDIO IN
VGA IN
TOUCH
AV IN
COAX OUT
RS232
To open or shut down AC power supply. “ I ” means power on, “ O ”
means power off
13
12
11
10
9
8
7
6
5
4
3
2
1
AC IN
High-definition multimedia interface signal input, connect to PC with
HDMI output, set-top box, or other video device
LAN
5 63
4
12337 4 2
28 9 10 11 12 13 14
HDMI OUT Connected to the devices with HDMI input function
DP Connected to devices with DisplayPort output function
AUDIO OUT Audio output to the external speaker
14
AC SWITCH

3. Remote Control
4
Installation Connecting and Setting Menu Operation Troubleshooting Care Maintenance
1) Remote control button instruction

Installation Connecting and Setting Menu Operation Troubleshooting Care Maintenance
Detailed Function Description
Power on/off
:
Mute switch
Built-in computer Windows key
Built-in computer Space key
Built-in computer spacebar Alt + Tab
Built-in computer program window close button
Numeric keys:Numeric input keys
Display channel information
Input signal source selection key, choose different sourced according to need
Android system main screen button
Setting menu button, press this button to pop up
Lock and unlock Buttons and Touch function
Lock and unlock Buttons function
Lock and unlock Touch function
Freeze and zoom
:
:
:
:
:
:
:
One key for blank screen
Backspace key
Direction key, press this button for upwards selection
Direction key, press this button for left selection
Direction key, press this button for right selection
Direction key, press this button for downwards selection
Confirmation key, press this key to confirm selection state
Quickly start writing software
Return key
Built-in computer page (previous page)
Built-in computer page (next page)
Volume switch key
Built-in computer F1 - F12 function keys
NOTE: In case of no built-in computer, all function keys related with computer are regarded as no operating functions.
: Function button
Display:
Input:
Home:
Menu:
Red:
Green:
Yellow:
Blue:
Enter:
Back:
PgUp:
PgDn:
CH.+ \ CH-.:
VOL+ \ VOL-:
F1-F12:
Function button
:
Alt+Tab
:
Space
:
:
:
Alt+F4

Install Batteries
(1) Open back cover of battery component on the back of remote control
(2) Install AAA type battery according to the corresponding electrode, make sure battery positive and negative pole
are correct ("+"to"+", "-" to "-"), please do not mix using old and new batteries
(3) After battery is installed, close the back cover of battery components, and make the following clip buckled to the
bottom
Range of remote control
2) Remote Control Instruction
Remote control can work normally within the range of 8 meters distance,
30 degrees left and right from the remotecontrol receiver; in order to protect
environment, please dispose waste battery into recycling box.
6
Installation Connecting and SettingMenu Operation TroubleshootingCare Maintenance
If the batttery is replaced by an incorrect type, it may lead to explosion.

Connection and Setting
For the safety of you and the machine, please do not connect any power plug before connection.
1. External Computer and Touch Connection
NOTE:
External computer input, equipment's best resolution is 1920 x1080
External computer can also connect to the equipment through the HDMI cable
Recommended computer configuration:
2.0GHz Processor, 1GB Memory More than 256 color display card
1GB Available Hard Drive
VGA-OUT/HDMI-OUT、Audio-OUT、USB Interface
Support Resolution 800*600,1024*768,1920*1080
Installation Connecting and Setting Menu Operation Troubleshooting Care Maintenance
(1) Use VGA cable to connect to VGA output port of external computer, and meanwhile use headphone audio cable to
connect to external computer audio output interface
(2) Use USB cable to connect to external computer USB port
(3) After cable connection, plug in power cord,and switch power on
(4) Start external computer
(5) Press key, and the equipment is power on
(6) Press the INPUT key to switch to VGA channel
Audio Cable VGA Cable
USB Cable
Computer

8
Installation Connecting and Setting Menu Operation Troubleshooting Care Maintenance
Video Game Set-top
Satellite TV receiver
Video recorder
Camera
DVD
AV Cable
2. Audio and Video Equipment
(1) Use AV audio and video cables to connect audio and video equipments with AV output (yellow for video, red
for right sound channel, and white for left sound channel)
(2) After cable connection, plug in power cord, and switch power on
(3) Press to turn equipment on
(4) Press INPUT key to switch to AV port
HDMI Cable
DVD Disc Player
(1) Use HDMI cable to connect audio and video equipment with HDMI output
(2) After cable connection, plug in power cord, and switch power on
(3) Press to turn equipment on
(4) Press INPUT key to switch to HDMI port
1) AV IN
2) HDMI

Installation Connecting and Setting Menu Operation Troubleshooting Care Maintenance
3. Coaxial Connection
Coaxial Cable
Power amplifier/stereo equipment
(1) Use coaxial cable to connect audio device with coaxial input
(2) After cable connection, plug in power cord, and switch power on
(3) Press to turn equipment on
4. Video Output Connection
(1) Use HDMI cable to connect display devices with HDMI in, and use audio cable to connect sound output
(2) After cable connection, plug in power cord, and switch power on
(3) Press to turn equipment on
(4) Press INPUT key to switch to HDMI port
Projector
Audio Cable
HDMI IN
HDMI Cable

Installation Connecting and Setting Menu Operation Troubleshooting Care Maintenance
Internet
5. LAN Connection
Network Cable
6. RS232 Connection
Serial Port Cable
Computer
After using serial port cable to connect central control equipment and machine, certain function of the machine can
be controlled via central control equipment, such as: machine ON/OFF, and adjustment of sound volume, etc.
RS232
LAN

11
Installation Connecting and Setting Menu Operation Troubleshooting Care Maintenance
A
Menu Operation
Touch Menu Operation
Call up Method
Take middle point position on the bottom of display screen as starting point, use touch pen to drag
towards screen center position to call up touch menu, as shown below.
Note: "Touch A Method" mentioned in this manual to call up touch menu method is shown above.
Setting Menu
General Setting
Press INPUT button on remote control or via touch A method to call up General Setting menu.
Press button on remote control to select the channel you need.
Press the Enter button on remote control or directly click with touch pen to confirm selected input channel.
Press return key on remote control, or click blank area outside menu with touch pen to exit menu.
Note: PC channel will only display when the equipment connect the built-in computer.
Android channel will only display when the equipment connect the bulit-in Android module.

12
Installation Connecting and Setting Menu Operation Troubleshooting Care Maintenance
Audio
Screen
Press Menu on remote control or click the icon on General Setting menu with touch pen to call up detail setting menu.
Detail setting menu includes Audio, Screen, Display and Adjust.
Detail Setting Menu
Press button on remote control or directly click with touch pen to select the option.
Press Mute on remote control or directly click with touch pen to open or close mute state.
Press Back on remote control, or click blank area outside menu with touch pen to exit menu.
Press Enter on remote control to enter adjustment mode, and press button or directly click with touch pen to adjust
each option. Press Enter/Back to exit adjustment.
Press button on remote control to select Audio setting menu.
Press Back on remote control, or click blank area outside menu with touch pen to exit menu.
Press Enter on remote control or directly click with touch pen to enter the selected mode.
Press on remote control or directly click with touch pen to select the option.
Press button on remote control to select Screen setting menu.

13
Installation Connecting and Setting Menu Operation Troubleshooting Care Maintenance
Display
Adjust
Press Back on remote control, or click blank area outside menu with touch pen to exit menu.
Press button on remote control or directly click with touch pen to select the option.
Press button on remote control to select Adjust setting menu.
Press Enter on remote control to enter adjustment mode, and press button or directly click with touch pen to adjust
each option. Press Enter/Back to exit adjustment. You can also click the “Auto” icon to adjust automatically.
Press Back on remote control, or click blank area outside menu with touch pen to exit menu.
Press button on remote control or directly click with touch pen to select the option.
Press button on remote control to select Display setting menu.
Press Enter on remote control to enter adjustment mode, and press button or directly click with touch pen to adjust
each option. Press Enter/Back to exit adjustment.

Simple Troubleshooting
PC mode
Touch Function
Video function can't work normally
Audio function can't work normally
Remote control
failure
Machine automatically
1. Check whether there are other objects between remote control and equipment control receiving
2. Check whether the battery electrode in the remote control is correct.
3. Check whether remote control needs to replace battery.
1. Whether set sleep or not.
2. Check whether there is sudden power outage.
3. Check whether there is no signal automatic shutdown.
1. Check whether display is set correctly
.
Signal out of range
Background has vertical
Image lack of color,
Display format that is
2. Check whether resolution is the best resolution.
3. Adjust line and field synchronization in menu.
1. Select automatic correction in menu.
2. Adjust clock and phase position in menu.
1. Check whether VGA is not well connected or has quality problem.
2. Adjust chromaticity and brightness or contrast in menu.
1. Select automatic correction in menu.
2. Adjust clock and phase position in menu.
Touch function invaild
Touch positioning not
1. Check whether touch driver is installed and started.
2. Check whether the size of article touched is comparable with finger.
1. Check whether driver is properly installed and make correction.
2. Check whether touch pen is facing the screen.
No picture and no sound
With horizontal or
vertical stripes or
image dithering
No color, color is weak
With image but without
Only one speaker has
VGA output without
1. Check whether the machine is started state.
2. Check whether signal wire is well plugged, whether INPUTis corresponding to it.
3. If in internal computer mode, check whether internal computer is started.
1. Check whether signal wire is well connected.
2. Check whether other electronic equipment or power tools are placed around the machine.
1. Adjust chromaticity and brightness or contrast in menu.
2. Check whether signal wire is well connected.
1. Check whether mute button is pressed for mute.
2. Press VOL + / - to adjust volume.
3. Check whether audio line is connected correctly.
1. Check whether connect external device with headphone cable.
1. Adjust sound balance in menu.
2. Check whether computer sound control panel only sets up one sound channel.
3. Check whether audio line is connected correctly.
Machine fails to work normally
window, thus leading to failure of remote control.
shut down
lines or streaks
color is incorrect
not supported
correct
or image is weak
sound
sound
sound
14
Installation Connecting and Setting Menu Operation Troubleshooting Care Maintenance

15
Installation Connecting and Setting Menu Operation Troubleshooting Care Maintenance
Maintenance
Proper maintenance can avoid many early faults and regular careful cleaning can make machine brand new.
Please unplug power plug before cleaning and maintenance, to prevent electric shock.
Clean screen
Clean face frame
Please mix and stir even a little fabric softener or tableware detergent with warm water.
Please use a soft cloth to be completely soaked in the mixture.
Please take out cloth and twist to half dry state to wipe machine screen.
Repeat for several times, pay attention not to squeeze water flow into machine when wiping machine.
Please use dry, soft, lint-free cloth to wipe front frame.
No use of machine for a long time
In case of no use of machine for a long time, such as holiday, please make sure to unplug the plug to
prevent any possible dangers caused by power supply ripple from lightning.

WWW.I3-TECHNOLOGIES.COM
[email protected]
AUTHORISED RESELLER