IBM eServer xSeries 225 Type 8647 User manual

Welcome. . .
Thank you for buying an
IBM xSeries server.
This server
contains information for setting
up and configuring your server.
For detailed information
about your server, view the
on the
You can also find the most
current information about your
server on the IBM Web site at:
http://www.ibm.com/pc/support
Installation Guide
User's Guide
Documentation CD.
Go to the Server Support
flow chart
Cable the server
and options
Start the server
Install options:
• Drives
• Microprocessors
• Adapters
• Memory
Did the server
start correctly?
Yes
No
Use ServerGuide™
to setup and
configure hardware
Did configuration
complete?
Use
ServerGuide to
install operating
system?
Use ServerGuide to
install applications,
such as IBM systems
management software
and IBM ServeRAID
programs
System is ready to use.
Go to the Server Support
flow chart to register
and profile your server.
Go to the Web for Instructions,
http://www.ibm.com/pc/support/
No
Yes
Yes
No
Installation Guide
Install the server in
the rack, if required
xSeries 225
Type 8647

Server Support
After you register and profile, you will be able to:
• Diagnose problems using the IBM Online Assistant
• Participate in the IBM discussion forum
• Receive e-mail notifications of technical updates
related to your profiled products
Register:
Profile: http://www.ibm.com/pc/register/ http://www.ibm.com/pc/support/
Register and profile your server
Yes
No
No
Use the troubleshooting
information provided with
your server to determine
the cause of the problem
and the action to take.
Flash the latest levels of BIOS
and RAID code, and download the
latest level of diagnostics code.
You can download this code at
http://www.ibm.com/pc/support/
No
No Software
Yes
Yes
Yes Hardware
Check all cables for loose connections
and verify that all optional devices you
installed are on the ServerProven list.
You can view the ServerProven list at
®
http://www.ibm.com/pc/compat/
Server working
properly?
Problem
solved?
Problem
solved?
Problem
solved? Hardware or
software problem?
View support telephone numbers at
http://www.ibm.com/planetwide/
View information about IBM support line at
or view support telephone numbers at
http://www.ibm.com/services/sl/products/
http://www.ibm.com/planetwide/

IBM xSeries 225
Type 8647
Installation Guide
SC59-P210-30
򔻐򗗠򙳰

Note:
Before using this information and the product it supports, read the general information in Appendix B, “Warranty information” on
page 63 and Appendix C, “Notices” on page 75.
First Edition (November 2002)
© Copyright International Business Machines Corporation 2002. All rights reserved.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.

Contents
Safety ............................vii
Chapter 1. Introduction ......................1
About your documentation CD....................2
System requirements ......................2
Starting the IBM Documentation Browser...............2
Using the IBM Documentation Browser ...............2
Using the search feature .....................3
Features and specifications .....................4
Notices and statements used in this book ...............5
Major components of your server ..................6
System-board option connectors ...................7
System-board internal connectors ..................7
System-board external connectors ..................8
Chapter 2. Installing options....................9
Installation guidelines .......................9
System reliability guidelines....................9
Handling static-sensitive devices .................10
Moving the stabilizing feet .....................10
Removing the side cover .....................11
Removing the bezel .......................12
Removing and installing the support bracket ..............13
Working with adapters ......................13
Adapter considerations .....................13
Installing an adapter ......................14
Cabling an optional SCSI adapter .................17
Installing internal drives......................18
Internal drive bays ......................18
Preinstallation steps ......................20
Installing a drive in bay 2 ....................20
Installing a non-hot-swap hard disk drive ..............22
Power and signal cables for internal drives .............25
Installing a hot-swap drive .....................26
SCSI IDs for hot-swap hard disk drives ...............27
Installing memory modules ....................28
Installing an additional microprocessor ................30
Installing a security rope clip ....................33
Completing the installation.....................34
Replacing the bezel ......................34
Replacing the side cover ....................35
Cabling the server.......................36
Updating your server configuration.................36
Chapter 3. Server controls, indicators, and power ...........37
Controls and indicators ......................37
Server power features ......................38
Turning on the server .....................38
Turning off the server .....................40
Chapter 4. Configuring your server ................41
Using the ServerGuide Setup and Installation CD ............41
Using the Configuration/Setup Utility program .............42
© Copyright IBM Corp. 2002 iii

Using ServeRAID Manager ....................42
Using ServeRAID Manager in startable-CD mode ...........43
Viewing your configuration....................47
Getting assistance ......................48
Using the LSI Logic Configuration Utility program ............49
Chapter 5. Installing IBM Director updates ..............51
Chapter 6. Solving problems ...................53
Diagnostic tools overview .....................53
Power-on self-test (POST).....................54
POST beep codes ......................54
POST error messages .....................54
ServerGuide problems ......................55
Troubleshooting charts ......................56
CD-ROM drive problems ....................56
Diskette drive problems.....................56
Hark disk drive problems ....................56
Keyboard, mouse, or pointing-device problems ............57
Memory problems .......................57
Microprocessor problems ....................57
Monitor problems .......................58
Power problems .......................59
System-board error LEDs .....................59
Appendix A. Getting help and technical assistance ..........61
Before you call .........................61
Using the documentation .....................61
Getting help and information from the World Wide Web ..........61
Software service and support ...................62
Hardware service and support ...................62
Appendix B. Warranty information .................63
Warranty period ........................63
Problem determination .....................63
Warranty service and support ..................64
International Warranty Service ..................64
Purchasing additional services ..................65
IBM Statement of Limited Warranty Z125-4753-06 8/2000 .........66
Part 1 - General Terms .....................66
Part 2 - Country-unique Terms ..................68
Appendix C. Notices ......................75
Edition notice .........................75
Trademarks ..........................76
Important notes.........................76
Electronic emission notices ....................77
Federal Communications Commission (FCC) statement .........77
Industry Canada Class A emission compliance statement ........77
Australia and New Zealand Class A statement ............78
United Kingdom telecommunications safety requirement.........78
European Union EMC Directive conformance statement .........78
Taiwan electrical emission statement ................78
Japanese Voluntary Control Council for Interference (VCCI) statement . . . 79
Power cords ..........................79
iv IBM xSeries 225 Type 8647: Installation Guide

Index ............................81
Contents v

vi IBM xSeries 225 Type 8647: Installation Guide

Safety
Before installing this product, read the Safety Information.
Antes de instalar este produto, leia as Informações de Segurança.
Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.
Læs sikkerhedsforskrifterne, før du installerer dette produkt.
Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.
Avant d’installer ce produit, lisez les consignes de sécurité.
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.
Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.
Antes de instalar este produto, leia as Informações sobre Segurança.
© Copyright IBM Corp. 2002 vii

Antes de instalar este producto lea la información de seguridad.
Läs säkerhetsinformationen innan du installerar den här produkten.
Statement 1
Danger
Electrical current from power, telephone, and communication cables is hazardous.
To avoid a shock hazard:
vDo not connect or disconnect any cables or perform installation, maintenance, or
reconfiguration of this product during an electrical storm.
vConnect all power cords to a properly wired and grounded electrical outlet.
vConnect to properly wired outlets any equipment that will be attached to this
product.
vWhen possible, use one hand only to connect or disconnect signal cables.
vNever turn on any equipment when there is evidence of fire, water, or structural
damage.
vDisconnect the attached power cords, telecommunications systems, networks, and
modems before you open the device covers, unless instructed otherwise in the
installation and configuration procedures.
vConnect and disconnect cables as described in the following table when installing,
moving, or opening covers on this product or attached devices.
To connect:
1. Turn everything OFF.
2. First, attach all cables to devices.
3. Attach signal cables to connectors.
4. Attach power cords to outlet.
5. Turn device ON.
To disconnect:
1. Turn everything OFF.
2. First, remove power cords from outlet.
3. Remove signal cables from connectors.
4. Remove all cables from devices.
Statement 2
CAUTION:
When replacing the lithium battery, use only IBM Part Number 33F8354 or an
equivalent type battery recommended by the manufacturer. If your system has a
module containing a lithium battery, replace it only with the same module type made
by the same manufacturer. The battery contains lithium and can explode if not
properly used, handled, or disposed of.
Do not:
vThrow or immerse into water.
vHeat to more than 100°C (212°F)
vRepair or disassemble
Dispose of the battery as required by local ordinances or regulations.
viii IBM xSeries 225 Type 8647: Installation Guide

Statement 3
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
vDo not remove the covers. Removing the covers of the laser product could result in
exposure to hazardous laser radiation. There are no serviceable parts inside the
device.
vUse of controls or adjustments or performance of procedures other than those
specified herein might result in hazardous radiation exposure.
Danger
Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the
following. Laser radiation when open. Do not stare into the beam, do not view directly with
optical instruments, and avoid direct exposure to the beam.
Statement 4
≥18 kg (39.7 lb) ≥32 kg (70.5 lb) ≥55 kg (121.2 lb)
CAUTION:
Use safe practices when lifting.
Safety ix

Statement 5
CAUTION:
The power-control button on the device and the power switch on the power supply do
not turn off the electrical current supplied to the device. The device also might have
more than one power cord. To remove all electrical current from the device, ensure
that all power cords are disconnected from the power source.
1
2
Statement 8
CAUTION:
Never remove the cover on a power supply or any part that has the following label
attached.
Hazardous voltage, current, and energy levels are present inside any component that
has this label attached. There are no serviceable parts inside these components. If you
suspect a problem with one of these parts, contact a service technician.
Statement 12
CAUTION:
The following label indicates a hot surface nearby.
Statement 13
DANGER:
Overloading a branch circuit is potentially a fire hazard and a shock hazard under
certain conditions. To avoid these hazards, ensure that your system electrical
requirements do not exceed the branch circuit protection requirements. Refer to the
information that is provided with your IBM device for electrical specifications.
xIBM xSeries 225 Type 8647: Installation Guide

Statement 15
CAUTION:
Make sure that the rack is secured properly to avoid tipping when the server unit is
extended.
Statement 23
CAUTION:
Do not place any object weighing more than 50 kg (110 lb) on top of rack-mounted
devices.
>50 kg (110 lb)
Declaración 23
PRECAUCIÓN:
No coloque ningún objeto que pese más de 50 kg (110 libras) encima de los
dispositivos montados en bastidor.
>50 kg (110 libras)
Hinweis 23
ACHTUNG:
Keine Gegenstände, die mehr als 50 kg wiegen, auf Rack-Einheiten ablegen.
>50 kg
Safety xi

Noticenø23
ATTENTION:
Ne posez pas d’objet dont le poids dépasse 50 kg sur les unités montées en armoire.
>50 kg
Varningsmeddelande 23
VARNING:
Placera inte något föremål som väger mer än 50 kg ovanpå rackmonterade enheter.
>50 kg
Merknad 23
ADVARSEL:
Ikke sett gjenstander som veier mer enn 50 kg oppå enheter som er montert i et
kabinett.
>50 kg
xii IBM xSeries 225 Type 8647: Installation Guide

Avviso 23
ATTENZIONE:
Non poggiare oggetti che pesano più di 50 kg sulla parte superiore delle unità montate
in rack.
>50 kg
Turvaohje 23
Varoitus:
Telineeseen asennettujen laitteiden päälle ei saa asettaa yli 50 kilon painoista esinettä.
>50 kg
Voorschrift 23
WAARSCHUWING:
Plaats geen objecten die meer dan 50 kg wegen op apparaten die in het rek zijn
gemonteerd.
>50 kg
Safety xiii

Forskrift 23
Pas på!:
Anbring ikke genstande, der vejer mere end 50 kg, oven på enheder, der er monteret i
rack.
>50 kg
Instrução 23
CUIDADO:
Não coloque nenhum objeto com peso superior a 50 kg (110 lbs.) sobre dispositivos
montados em rack.
>50 kg (110 lbs)
xiv IBM xSeries 225 Type 8647: Installation Guide

23
50 110
50 110
Safety xv

23
50
50
·
23
50
50
23
50 110
50 110
xvi IBM xSeries 225 Type 8647: Installation Guide

> 50 Kg
50
23
23
50 110
50 110
23
50 110
50 110
Safety xvii

23
50
50
23
50 110
50 110
23
50 110
50 110
xviii IBM xSeries 225 Type 8647: Installation Guide