IBM DTCA-23240 - Travelstar 3.2 GB Hard Drive User manual

IBML
OEM HARD DISK DRIVE SPECIFICATIONS
for
DTCA-23240/24090 (3240/4090 MB)
2.5-Inch Hard Disk Drive with ATA Interface
Revision (3.0)
S83H-5548-05

IBML
OEM HARD DISK DRIVE SPECIFICATIONS
for
DTCA-23240/24090 (3240/4090 MB)
2.5-Inch Hard Disk Drive with ATA Interface
Revision (3.0)
S83H-5548-05

1st Edition (0.1) S83H-5548-00 (May 08, 1997) Preliminary
2nd Edition (0.2) S83H-5548-01 (May 15, 1997) Preliminary
3rd Edition (1.0) S83H-5548-02 (June 27, 1997)
4th Edition (1.1) S83H-5548-03 (July 16, 1997)
5th Edition (2.0) S83H-5548-04 (September 5, 1997)
6th Edition (3.0) S83H-5548-05 (October 01, 1997)
The following paragraph does not apply to the United Kingdom or any country where such provisions are
inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS
PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer or express or implied warranties
in certain transactions, therefore, this statement may not apply to You.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the
information herein; these changes will be incorporated in new editions of the publication. IBM may make improve-
ments and/or changes in the product(s) and/or the program(s) described in this publication at any time.
It is possible that this publication may contain reference to, or information about, IBM products (machines and
programs), programming, or services that are not announced in your country. Such references or information
must not be construed to mean that IBM intends to announce such IBM products, programming, or services in your
country.
Technical information about this product is available from your local IBM representative or at
http://www.ibm.com/harddrive
IBM may have patents or pending patent applications covering subject matter in this document. The furnishing
of this document does not give you any license to these patents. You can send license inquiries, in writing, to the
IBM Director of Commercial Relations, IBM Corporation, Armonk, NY 10577.
 Copyright International Business Machines Corporation 1997. All rights reserved.
Note to U.S. Government Users —Documentation related to restricted rights —Use, duplication or disclosure is
subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp.

Contents
1.0 General ..................................................... 1
1.1 Glossary ..................................................... 1
1.2 General Caution ................................................ 1
1.2.1 Caution of usage ............................................. 2
2.0 General Features ................................................ 5
Part 1. Functional Specification ...................................... 7
3.0 Drive Characteristics .............................................. 9
3.1 Logical Drive Format ............................................. 9
3.2 Data Sheet .................................................... 9
3.3 Performance Characteristics ......................................... 10
3.3.1 Command Processing .......................................... 10
3.3.2 Average Seek Time (Including Settling) ............................... 10
3.3.3 Single Track Seek Time ........................................ 11
3.3.4 Full Stroke Seek ............................................. 12
3.3.5 Average Latency ............................................. 12
3.3.6 Drive Ready Time ........................................... 12
3.3.7 Operating Modes. ............................................ 13
4.0 Data Integrity ................................................. 15
4.1 Data Loss by Power Off ........................................... 15
4.2 Write Cache .................................................. 15
4.3 Equipment Status ............................................... 15
4.4 WRITE Safety ................................................ 16
4.5 Data buffer test ................................................ 16
4.6 Error Recovery ................................................ 16
4.7 Automatic Reallocation ........................................... 16
4.7.1 Non Recovered Write Errors ..................................... 16
4.7.2 Non Recovered Read Errors ...................................... 16
4.7.3 Recovered Read Errors ......................................... 17
5.0 Specification .................................................. 19
5.1 Environment ................................................. 19
5.1.1 Temperature and Humidity ...................................... 19
5.1.2 Magnetic Fields ............................................. 20
5.2 DC Power Requirements .......................................... 21
5.2.1 Start Up Current ............................................ 22
5.3 Reliability ................................................... 23
5.3.1 Data Reliability ............................................. 23
5.3.2 Failure Prediction ( S.M.A.R.T.) ................................... 23
5.3.3 Cable Noise Interference ........................................ 23
5.3.4 Drive Usage Condition ......................................... 23
5.3.5 Preventive Maintenance ........................................ 23
5.3.6 Load/Unload ............................................... 24
5.4 Mechanical Specifications .......................................... 26
5.4.1 Mechanical Dimensions and Weight ................................. 26
5.4.2 Hole Locations ............................................. 26
5.4.3 Mounting Orientation ......................................... 27
Copyright IBM Corp. 1997 iii

5.5 Vibration and Shock ............................................. 28
5.5.1 Operating Vibration ........................................... 28
5.5.2 Non-Operating Vibration ........................................ 28
5.5.3 Operating Shock ............................................. 29
5.5.4 Non-Operating Shock ......................................... 29
5.6 Acoustics ................................................... 30
5.6.1 Sound Power Level ........................................... 30
5.6.2 Discrete Tone Penalty ......................................... 31
5.7 Identification ................................................. 32
5.7.1 Labels ................................................... 32
5.8 Electromagnetic Compatibility ....................................... 32
5.8.1 CE Mark ................................................. 32
5.8.2 C-Tick Mark ............................................... 32
5.9 Safety ...................................................... 33
5.9.1 Underwriters Lab(UL) Approval ................................... 33
5.9.2 Canadian Standards Authority(CSA) Approval ........................... 33
5.9.3 IEC Compliance ............................................. 33
5.9.4 German Safety Mark .......................................... 33
5.9.5 Flammability ............................................... 33
5.9.6 Secondary Circuit Protection ..................................... 33
5.10 Packaging .................................................. 33
6.0 Electrical Interface Specifications ...................................... 35
6.1 Cabling ..................................................... 35
6.2 Interface Connector ............................................. 35
6.2.1 Signal Definition ............................................. 36
6.3 Interface Logic Signal Levels ......................................... 39
6.4 Reset timings .................................................. 40
6.5 PIO Timings .................................................. 41
6.5.1 DMA Timings (Single Word) ..................................... 42
6.5.2 DMA Timings (Multiword) ...................................... 43
6.5.3 Ultra DMA Timings ........................................... 44
6.6 Drive Address Setting ............................................ 52
6.6.1 Default Setting .............................................. 52
6.7 Addressing of drive Registers ........................................ 53
Part 2. ATA Interface Specification .................................. 55
7.0 General ..................................................... 57
7.1 Introduction .................................................. 57
7.2 Terminology .................................................. 57
8.0 Deviations From Standard .......................................... 59
9.0 Registers .................................................... 61
9.1 Alternate Status Register ........................................... 62
9.2 Command Register .............................................. 62
9.3 Cylinder High Register ............................................ 62
9.4 Cylinder Low Register ............................................ 62
9.5 Data Register ................................................. 63
9.6 Device Control Register ........................................... 63
9.7 Drive Address Register ............................................ 63
9.8 Device/Head Register ............................................. 64
9.9 Error Register ................................................. 64
iv OEM Specifications of DTCA-2xxxx 2.5 inch HDD

9.10 Features Register ............................................... 65
9.11 Sector Count Register ............................................ 65
9.12 Sector Number Register ........................................... 65
9.13 Status Register ................................................ 65
10.0 General Operation Descriptions ...................................... 67
10.1 Reset Response ................................................ 67
10.1.1 Register Initialization .......................................... 69
10.2 Diagnostic and Reset considerations .................................... 70
10.3 Sector Addressing Mode .......................................... 71
10.3.1 Logical CHS Addressing Mode .................................... 71
10.3.2 LBA Addressing Mode ......................................... 71
10.4 Power Management Feature ........................................ 72
10.4.1 Power Mode ............................................... 72
10.4.2 Power Management Commands ................................... 72
10.4.3 Standby/Sleep command completion timing ............................ 72
10.4.4 Standby timer .............................................. 73
10.4.5 Status ................................................... 73
10.4.6 Interface Capability for Power Modes ................................ 73
10.4.7 Initial Power Mode at Power On ................................... 73
10.5 Adaptive Battery Life Extender (ABLE-2) Feature ........................... 74
10.5.1 Performance Idle mode ........................................ 74
10.5.2 Active Idle mode ............................................ 74
10.5.3 Low Power Idle mode ......................................... 74
10.5.4 Transition Time ............................................. 74
10.6 S.M.A.R.T. Function ............................................ 76
10.6.1 Attributes ................................................ 76
10.6.2 Attribute values ............................................. 76
10.6.3 Attribute thresholds .......................................... 76
10.6.4 Threshold exceeded condition ..................................... 76
10.6.5 S.M.A.R.T. commands ........................................ 76
10.6.6 S.M.A.R.T. operation with power management modes ...................... 77
10.7 Security Mode Feature Set ......................................... 78
10.7.1 Security mode .............................................. 78
10.7.2 Security level .............................................. 78
10.7.3 Password ................................................. 78
10.7.4 Operation example ........................................... 79
10.7.5 Command Table ............................................ 82
10.8 Protected Area Function (Vendor Specific) ............................... 84
10.8.1 Example for operation (In LBA mode) ............................... 84
10.9 Write Cache Function ............................................ 86
10.10 Reassign Function ............................................. 87
10.10.1 Auto Reassign Function ....................................... 87
11.0 Command Protocol .............................................. 89
11.1 Data In Commands ............................................. 89
11.2 Data Out Commands ............................................ 90
11.3 Non-Data Commands ............................................ 92
11.4 DMA Data Transfer Commands ...................................... 93
12.0 Command Descriptions ........................................... 95
12.1 Check Power Mode (E5h/98h) ...................................... 99
12.2 Execute Device Diagnostic (90h) ..................................... 100
12.3 Flush Cache (E7h) .............................................. 101
12.4 Format Track (50h: Vendor Specific) ................................... 102
Contents v

12.5 Format Unit (F7h: Vendor Specific) ................................... 104
12.6 Identify Device (ECh) ........................................... 106
12.7 Identify Device DMA (EEh) ........................................ 110
12.8 Idle (E3h/97h) ................................................ 111
12.9 Idle Immediate (E1h/95h) ......................................... 112
12.10 Initialize Device Parameters (91h) .................................... 113
12.11 Read Buffer (E4h) ............................................. 114
12.12 Read DMA (C8h/C9h) .......................................... 115
12.13 Read Long (22h/23h) ........................................... 117
12.14 Read Multiple (C4h) ........................................... 119
12.15 Read Native Max LBA/CYL (F8h: Vendor Specific) ......................... 121
12.16 Read Sectors (20h/21h) .......................................... 123
12.17 Read Verify Sectors (40h/41h) ...................................... 125
12.18 Recalibrate (1xh) .............................................. 127
12.19 Security Disable Password (F6h) .................................... 128
12.20 Security Erase Prepare (F3h) ....................................... 129
12.21 Security Erase Unit (F4h) ......................................... 130
12.22 Security Freeze Lock (F5h) ........................................ 132
12.23 Security Set Password (F1h) ....................................... 133
12.24 Security Unlock (F2h) .......................................... 135
12.25 Seek (7xh) ................................................. 137
12.26 Set Features (EFh) ............................................ 138
12.27 Set Max LBA/CYL (F9h: Vendor Specific) ............................... 140
12.28 Set Multiple (C6h) ............................................. 142
12.29 Sleep (E6h/99h) .............................................. 143
12.30 S.M.A.R.T. Function Set (B0h) ..................................... 144
12.30.2 Device Attributes Data Structure .................................. 147
12.30.3 Device Attribute Thresholds Data Structure ............................ 153
12.30.4 Error Reporting ............................................ 155
12.31 Standby (E2h/96h) ............................................. 157
12.32 Standby Immediate (E0h/94h) ...................................... 158
12.33 Write Buffer (E8h) ............................................. 159
12.34 Write DMA (CAh/CBh) ......................................... 160
12.35 Write Long (32h/33h) ........................................... 162
12.36 Write Multiple (C5h) ........................................... 164
12.37 Write Sectors (30h/31h) .......................................... 166
12.38 Write Verify (3Ch: Vendor Specific) ................................... 168
13.0 Timings .................................................... 171
14.0 Appendix ................................................... 175
14.1 Commands Support Coverage ....................................... 175
14.2 SET FEATURES Command Support Coverage ............................ 178
Index ......................................................... 179
vi OEM Specifications of DTCA-2xxxx 2.5 inch HDD

1.0 General
This document describes the specifications of the following IBM 2.5-inch, ATA interface hard disk drives:
DTCA-23240 (3240 MB)
DTCA-24090 (4090 MB)
Note: The specifications are subject to change without notice.
1.1 Glossary
Word Meaning
Kbpi 1 000 Bit Per Inch
Mbps 1 000 000 Bit per second
MB 1 000 000 bytes
KB 1 000 bytes
32 KB 32 x 1 024 bytes
64 KB 64 x 1 024 bytes
Mb/sq.in 1 000 000 bits per square inch
MLC Machine Level Control
TBD To Be Defined
1.2 General Caution
Do not apply pressing force on the top cover (See Figure 1 on page 2).
Do not cover the breathing hole on the top cover (See Figure 2 on page 3).
Do not touch the interface connector pins and the surface of printed circuit board.
The drive can be easily damaged by shocks or ESD (Electric Static Discharge), so any damages applied
to the drive after taking out from shipping package and opening ESD protective bag are user's responsi-
bilities. .
Copyright IBM Corp. 1997 1

1.2.1 Caution of usage
Figure 1. Handling caution of DTCA-23240/24090
2OEM Specifications of DTCA-2xxxx 2.5 inch HDD

Figure 2. Breathing hole caution of DTCA-23240/24090
General 3

4OEM Specifications of DTCA-2xxxx 2.5 inch HDD

2.0 General Features
2.5-inch, 12.5mm Height MCC Compliance
4090MB / 3240MB formatted capacity
512 bytes/sector
AT Interface (Enhanced IDE) conforming to ATA-3
Integrated controller
No-ID recording format
PRML channel
Multi Zone Recording
Enhanced ECC
−On The Fly correction : 9 Bytes/sector
−Offline correction : 12 Bytes/sector
468KB Buffer for Read and Write
Host data transfer speed.
−16.6 MB/sec : PIO Mode-4
−33.3 MB/sec : Ultra DMA Mode-2
Media data transfer rate 83.4 (outer zone) - 51.7 (inner zone) Mbit/sec
Average seek time 13 milliseconds for read
Closed-loop actuator servo (Embedded Sector Servo)
Rotary voice coil motor actuator
Load / Unload mechanism
Adaptive power save control (0.65 Watt at low-power idle state)
2.8 sec Power on to ready
Shock
−Non-operation : 600G/2ms
−Operation : 100G/2ms
Note: Mounting screw position is
−Compatible with DTNA-2xxxx, DLGA-2xxxx, DDLA-2xxxx, DPLA-2xxxx.
−Incompatible with DMCA-2xxxx, DCRA-2xxxx, DSOA-2xxxx, DPRA-2xxxx, DBOA-2xxx.
Copyright IBM Corp. 1997 5

6OEM Specifications of DTCA-2xxxx 2.5 inch HDD

Part 1. Functional Specification
Copyright IBM Corp. 1997 7

8OEM Specifications of DTCA-2xxxx 2.5 inch HDD

3.0 Drive Characteristics
This chapter provides the characteristics of the drives.
3.1 Logical Drive Format
The customer usable data capacity is as shown below.
3.2 Data Sheet
Figure 3. Drive Parameter
Descriptions DTCA-23240 DTCA-24090
Logical Head Number 16 16
Logical Sectors/Track 63 63
Logical Cylinder Number 6304 7944
Logical Sector Size 512 512
Total Customer Usable Data Sectors 6 354 432 8 007 552
Total Customer Usable Data Bytes 3240 MB
(3,253,469,184) 4090 MB (4,099,866,624)
Figure 4. Data Sheet
Media transfer rate [Mb/sec] 51.7 - 83.4
Interface transfer rate [MB/sec] 33.3 MB/sec Max ( Ultra DMA Mode-2 )
16.6 MB/sec Max ( PIO-4 )
Data buffer size [KB] 512 KB ( Read / Write )
Rotational speed [RPM] 4000
Average latency [msec] 7.5
Recording density [Kbpi] 211 Maximum
Track density [TPI] 12,500
Areal density [Gb/sq.in.] 2.64 Maximum
Number of zone 12
Number of disks 3
Number of heads 5/6
Servo design method Embedded sector servo
Copyright IBM Corp. 1997 9

3.3 Performance Characteristics
File performance is characterized by the following parameters:
Command Overhead
Mechanical Positioning
−Seek Time
−Latency
Data Transfer Speed
Buffering Operation
Note: All the above parameters contribute to a file performance. There are other parameters which con-
tribute to the performance on the actual system. This specification tries to define the essential file character-
istics, not the system throughput which is dependent on the system and the application.
The following table gives a typical value of each parameter. The detail descriptions are followed in the next
sections.
Figure 5. Performance Parameter
3.3.1 Command Processing
Command overhead time is defined as the total time from when the command is received by the drive to the
start of motion of the actuator.
3.3.2 Average Seek Time (Including Settling)
Figure 6. Mechanical Positioning Performance
'Typical' and 'Max' are given throughout the performance specification by;
Typical Average of the drive population tested at nominal environmental
and voltage conditions.
Max Maximum value measured on any one drive over the full range of the environmental and
voltage conditions. (See section on Environment and D.C. Power Requirements.)
Function Typical
Average Random Seek Time For Read 13 msec
Average Random Seek Time For Write 14 msec
Rotational Speed 4000 rpm
Power On To Ready 2.8 sec
Command Overhead 1.0 msec
Disk-Buffer Data Transfer 83.4 - 51.7 Mbit/sec
Buffer-Host Data Transfer 16.6 MB/sec (PIO Mode-4)
33.3 MB/sec (Ultra DMA Mode-2)
Command Type Typical Max
Read 13 msec 16 msec
Write 14 msec 17 msec
10 OEM Specifications of DTCA-2xxxx 2.5 inch HDD

The seek time is measured from the start of motion of the actuator to the start of a reliable read or write
operation. Reliable read or write implies that error correction/recovery is not employed to correct for arrival
problems. The Average Seek Time is measured as the weighted average of all possible seek combinations.
max
SUM (max + 1
Ä n) (Tn.in + Tn.out)
n=1
Weighted Average =
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
(max + 1) (max)
Where:max = Maximum Seek Length
n = Seek Length(1tomax)
Tn.in = Inward measured seek time for a n track seek
Tn.out = Outward measured seek time for a n track seek
3.3.3 Single Track Seek Time
Figure 7. Single Track Seek Time
Single track seek is measured as the average of one (1) single track seek from every track in both directions
(inward and outward).
Function Typical Max
READ 4 msec 5.5 msec
Write 4 msec 6.5 msec
Drive Characteristics 11

3.3.4 Full Stroke Seek
Figure 8. Full Stroke Seek Time
Full stroke seek is measured as the average of 1000 full stroke seeks.
3.3.5 Average Latency
Figure 9. Latency Time
3.3.6 Drive Ready Time
Figure 10. Drive Ready Time
Ready The condition in which the drive is able to perform a media access command (e.g.
read, write) immediately.
Power On This includes the time required for the internal self diagnostics.
Function Typical Max
Read 23.0 msec 30.0 msec
Write 24.0 msec 31.0 msec
RPM Time for a revolution Average Latency
4000 15.0 msec 7.5 msec
Condition Typical Max
Power On To Ready 2.8 sec 9.5 sec
12 OEM Specifications of DTCA-2xxxx 2.5 inch HDD