iCarsoft Multi-system Car Diagnostic Tool Series User manual

User’s Manual
For BMM V3.0 / MB V3.0 / VAWS V3.0 / POR V3.0 / VOL
V3.0 / OP V3.0 / LR V3.0 / US V3.0 / FR V3.0 / JP V3.0 / FA
V3.0 / KR V3.0 / CR V3.0
Multi-system Car Diagnostic Tool series
PROFESSIONAL . FAST . SMART . POWERFUL

EN
Contents
1 PRODUCT DESCRIPTIONS .................................................................. 1
2SPECIFICATIONS ................................................................................... 2
3 ACCESSORIES INCLUDED .................................................................. 2
4 PRODUCT FEATURES........................................................................... 2
5 VEHICLE COVERAGE............................................................................ 5
6 OPERATION ............................................................................................ 5
6.1 DIAGNOSE.................................................................................................6
6.1.1 Vehicle identification..................................................................6
6.1.2 Diagnostic mode..........................................................................8
6.1.3 Diagnostic operation ................................................................10
6.2 SERVICE FUNCTION ................................................................................18
6.2.1 Oil Reset.......................................................................................19
6.2.2 EPB................................................................................................21
6.2.3 BMS...............................................................................................22
6.2.4 DPF................................................................................................23
6.2.6 SAS................................................................................................25
6.2.5 ETC................................................................................................26
6.2.7 ABS Bleeding..............................................................................27
6.2.8 Injector .........................................................................................28
6.2.9 Head Lamp ..................................................................................30
6.2.10 Air Suspension ........................................................................31
6.2.11 TPMS...........................................................................................32
6.2.12 Air-conditioner.........................................................................33
6.2.13 Fuel pump .................................................................................34
6.2.14 Engine Idle ................................................................................35
6.2.15 Body stability............................................................................36
6.2.16 Air Filter .....................................................................................37
6.2.17 Door ............................................................................................38

EN
6.2.18 Seat............................................................................................. 39
6.3 BATTERY VOLTAGE TEST....................................................................... 40
6.4 OBDII /EOBD ...................................................................................... 40
6.5 DTC LOOKUP......................................................................................... 41
6.6 REVIEW AND REPORT ............................................................................ 41
6.7 SETUP..................................................................................................... 41
6.7.1 Language..................................................................................... 41
6.7.2 Unit of Measure.......................................................................... 42
6.7.3 Buzzer .......................................................................................... 42
6.7.4 LOG............................................................................................... 42
6.7.5 Clear Data.................................................................................... 42
6.7.6 Factory Data Reset ................................................................... 42
6.8 HELP....................................................................................................... 43
6.9 ABOUT.................................................................................................... 43
7 WARRANTY........................................................................................... 43
7.1 LIMITED ONE YEAR WARRANTY............................................................ 43
7.2 SERVICE PROCEDURES ......................................................................... 44
8 SOFTWARE UPDATE&DATA PRINT .................................................. 44
8.1 UPDATE PROCEDURES:......................................................................... 44
8.2 DATA PRINT PROCEDURES:................................................................... 47

EN
1
Multi-system Car Diagnostic Tool series
1Product Descriptions
Serial
Number
Button Name
Description
1
BACK Button
Returns to previous menu
2
UP Button
Moves cursor up for selection
3
LEFT Button
Moves cursor left for selection
4
RIGHT Button
Moves cursor right for selection
5
DOWN Button
Moves cursor down for selection
6
ENTER Button
Confirms a selection (or action) from a
menu list
7
HELP Button
Shows help information for test results or
user operation.
8
F1 Function
Button
In case of special use

EN
2
9
F2 Function
Button
In case of special use
10
OBDII
Connector
Connects the scan tool to the vehicle’s
Data Link Connector via OBDII Cable
11
Storage Card
Slot
Holds the system of the scan tool.
12
DATA Cable
Connector
Connects the scan tool for power supply
and update the software if needed.
2Specifications
Item
Description
Display
4.0” TFT LCD,With 480*320 Pixels
Operation Temperature
0°C ~50°C
Storage Temperature
-20°C ~70°C
Operating Voltage
9-18V
Operating Current
150mA@12V(Typical)
Power Consumption
1.8W(Typical)
Dimension
206*104.1*32.6mm(L*W*H)
Weight
<350g
3Accessories Included
User’s manual
Instruction on tool operations
Data Cable
Allows easy update via a PC and internet
connection
OBDII Main Cable
Connects tools with Vehicle to use
Storage Card
Download Vehicle program
4Product Features

EN
3
1) iCarsoft Multi-system Car Diagnostic tool V3.0 Series can do it all-reads
and clears trouble codes on all the systems such as engine ,transmission,
ABS and airbag etc.
2) Support OBDII / EOBD Ten Modes of Operation.
3) Read Live Data.
4) Full ECU Diagnosis.
5) Applies to the single Brand of all Models equipped with OBDII-16DLC.
6) Easy To Use with Silicone Keys.
7) Auto identify technology can automatically identify model and year
information in no time.
8) Actuation Test / Bi-directory Test is used to access vehicle-specific
subsystem and component tests.
9) Basic Setting means reset some basic parameter settings for each control
module, especially some parts / sensors, etc.
10) Adaption, this function allows you to perform adaptive learning / reset /
calibration and other functions for each control module, and also includes
some important module data for parameter adjustment.
11) Support Freeze Frame of Fault Code functions.
12) Oil Light / Service Reset: Support service lamp reset.
13) Electronic Parking Brake (EPB) system maintenance, deactivates and
reactivates the EPB system for replacement and initialization.
14) Battery Management System (BMS), registers new battery to the BMS
while battery replacement.
15) Diesel Particulate Filter (DPF) regeneration control system, request the
DPF regeneration process while DPF blockage and turn off the DPF
indicator.
16) Electronic Throttle Control system (ETC), relearns the throttle valve
control value while clear or replace the throttle value.
17) SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering
wheel to straight ahead, or recalibrates SAS while steering part
replacement.
18) ABS Bleeding (BLD), Release the air to restore ABS brake sensitivity, or
relearn while ABS replaced.

EN
4
19) Injector Coding (INJ), relearn the injector control parameter while the
injector renewed or replaced.
20) Head Lamp is about the headlamp maintenance, maintenance and other
related operations (including AFS setting), and then perform this function
for calibration.
21) Air Suspension: After maintenance, replacement and other operations of
the suspension height sensor are performed in all aspects, this function
needs to be executed for suspension learning and calibration.
22) The TPMS service function include displaying sensor IDs from the
vehicle’s ECU, inputting TPMS sensor replacement IDs and testing
sensors.
23) Fuel pump, carry out this function, activate the replaced fuel pump, make
the car start can inject fuel normally, make the engine achieve the ideal
running state.
24) Air-conditioner, when the air conditioning system can not work normally,
this function can be performed, and the air conditioner can be activated for
a period of time to match the replaced refrigerant, blower pump and other
automotive components.
25) Engine Idle, adjust the engine speed at idle speed.
26) Body stability, learning and calibration after replacing body stability control
unit and other related components.
27) Air Filter, the disassembly, repair or replacement of the air filter will cause
some particles and impurities in the air to enter the parts of the car. It is
necessary to carry out the air filter learning and matching function to make
the air filter work normally.
28) Door, this function can provide users with calibration after maintenance or
replacement of window lifting motor. Such as window calibration.
29) Seat, this function can provide users with calibration after repairing or
replacing the seat position drive motor. Such as driver's seat calibration,
passenger’s seat calibration, etc.
30) The Print Data function allows you printing out diagnostic data recorded
by the scan tool or customized test reports.
31) Battery test allows you getting the voltage of battery with OBD port by the
scan tool when the engine starts.

EN
5
32) DTC Library to lookup when user is operating this tool.
33) Upgrade Via PC.
34) Multi-language: English, German, Dutch, Spanish, French.
Note:
Certain functions may be limited from the vehicle manufacturer due to the
requirement of a special factory access code.
This scan tool covers over 20 years of models, so some functions may not be
available on all years / models.
5Vehicle Coverage
iCarsoft Multi-system Car Diagnostic Tool V3.0 Series is a Professional
and powerful vehicle fault diagnosis tool developed by iCarsoft Technology Inc.
With a 4.0”TFT LCD and unique diagnostic software, it features full ECU
diagnosis of single vehicle brand and test modes mainly include: CANBUS,
ISO9141, KWP2000, and J1850 etc . It enables technicians to accurately
diagnose complex problems. CR V3.0 is Multiple Choice of Vehicle Brands.
6Operation
Note:
Welcome to using the scan tool of icarsoft, you should do something before
using the scan tool.
At first, please check production list such as scan tool and accessories
already when you open the package, read the user’s manual and connect
the OBDII cable to scan tool.
There are two ways to provide power the scan tool, one way is using data
cable external 5V power adapter or USB port, another way is using OBDII
Cable connection to the vehicle’s Data Link Connector.
Don’t open the scan tool in a rainy environment or in the absence of
training. Don’t soak the scan tool as the keypad and port are not
waterproof, also no solvents such as alcohol are allowed to clean the
keypad or display.
You can set the language, Unit of Measure and Buzzer your wanted when

EN
6
the scan tool connected power.
Make sure the ignition is ON when you connected the scan tool already.
Note:
For vehicles manufactured by different vendors, it is possible that it has
different diagnostic menus. For details, please follow the instructions on the
screen to proceed.
6.1 Diagnose
This function is specially designed to
diagnose electronic control system of
single vehicle model connected the scan
tool already.
The diagnostic application connects data to
the electronic control system of the test
vehicle used for vehicle diagnostics. The application performs function tests to
retrieve vehicle diagnostic information such as fault and event codes and
real-time data for various vehicle control systems such as engine,
transmission and ABS.
6.1.1 Vehicle identification
When the device is connected to the
vehicle, there are two ways to enter the
diagnostic system:
1. Auto identify or VIN identify
2. Vehicle select
Note:
“Auto identify”or “VIN identify”will be displayed on the interface, depending on
the vehicle type.
6.1.1.1 Auto identify
By reading the vehicle specific information (including VIN identify), the
vehicle identification can be carried out quickly.
6.1.1.2 VIN identify

EN
7
The “VIN identify”can automatically parse the car model, eliminating the
cumbersome program manually input by the user.
The device diagnostic system has the latest automatic identification
function based on the vehicle identification number. It stores all the
diagnosable electronic control units of Scan on the vehicle and performs the
diagnosis on the selected system. Perform automatic VIN recognition. For
some vehicles that do not support the automatic vehicle identification number
scanning function, the diagnostic tool allows you to manually enter the vehicle
identification number. Recognize the VIN first. If the VIN cannot be recognized,
you need to enter it manually.
Automatic VIN identification
To perform Auto VIN identification
1. Click the Diagnostics application button from the device’s Job Menu. The
Vehicle Menu displays.
2. Click the vehicle manufacturer button to go to the next level menu.
3. Select VIN identify. Once the test vehicle is successfully identified, the
screen will show the Vehicle Identification, then tap OK to enter the
diagnosis.
Manual VIN input
To perform Manual VIN input
1. Perform the first 2 steps of automatic
VIN identification.
2. If the automatic VIN matching is not
successful, or if the VIN does not
match, a VIN input box will pop up,
manually input the VIN.

EN
8
6.1.1.3 Vehicle Select
When the vehicle cannot be retrieved automatically through the ECU of
the vehicle, or the specific VIN is unknown, you can manually select the
vehicle. Or in some cases, when the user selects vehicle selection rather than
vehicle VIN scanning, the system will provide the option of vehicle selection,
and the user can select the vehicle model, model year, etc. according to his
own model.
To perform vehicle selection:
1) Click the diagnostic application button in the device’s job menu. Vehicle
menu display.
2) Select the brand of the test vehicle.
3) Choose the "vehicle selection" option to make a series of selections
according to the on-screen prompts, select the correct vehicle model,
model year, etc.
4) Select step by step according to the screen prompts, and finally enter the
list of diagnosis modes.
5) The user performs various operations by selecting the diagnostic mode.
6.1.2 Diagnostic mode
The scan tool provides five diagnostic modes for users to choose, as
shown in the figure below: Quick Test, Auto Scan, Control Unit, Service, Quick
Erase. For the quick erase mode, it is in the form of a button. Users need to go
to the next layer to quickly clear the vehicle fault information recorded in the
diagnosis process.

EN
9
1) Quick test
Scan the control unit of the whole
vehicle, At the same time, the fault
information of each control unit is
detected to show the control unit list
and fault status.
Left side --- Show vehicle control unit number and system name.
Right side --- Show vehicle control unit status.
Fault | 5 ：Indicates that the fault code is detected; 5 represents the
number of faults detected.
Pass: Indicates that the vehicle is equipped with this system and
has no fault code.
Fitted: Indicates that the vehicle is equipped with this system.
Not Fitted: Indicates that it is detected that the vehicle is not
equipped with this system.
Unknown: Indicates that it is detected that it is unknown whether
the vehicle is equipped with this system.
Scanning: Indicates that the device is scanning the vehicle system.
[Quick Erase] --- Press this button to quickly clear the fault code.
[Pause] / [Continue] --- Press this button to pause or continue scanning.
2) Auto scan
Select this option to automatically diagnose and scan all systems on the
vehicle. The following figure shows the operation interface of the
automatic scanning function:

EN
10
Note:
If quick test is performed first and then auto scan is performed, the
diagnostic status will be memorized.
3) Control Unit
This option allows you to manually locate the desired control system.
According to the menu driven program, the user manually selects the
specified control unit that he wants to detect, skips the whole vehicle
scanning, and directly carries out the diagnosis of the specified system.
4) Service
The car diagnostic tool provides an entry from the diagnostic mode to the
service function. You can easily select the service function from the
diagnosis mode, without returning to the service menu for selection. For
different models, the service functions are different. Select this option to
perform regular maintenance, such as reset oil service lamp and
calibrating different systems.
5) Quick erase
Quickly clear the vehicle fault information recorded in the diagnosis
process.
6.1.3 Diagnostic operation
The main function menu options of different vehicles will vary slightly, and the
main function menu usually includes the following options:
1. Module Information --- Read complete electronic system module
information.
2. Read fault code ---This function reads and displays the fault codes
retrieved from the vehicle control system.

EN
11
3. Clear fault memory --- Use this function to clear the original fault code
after reading the vehicle fault code and completing the repair.
4. View data --- When this function is selected, the data list of the selected
module will be displayed on the screen.
5. Actuation Test --- This function provides access to vehicle specific
subsystem tests and component tests.
6. Basic settings --- Basic Setting means reset some basic parameter
settings for each control module, especially some parts / sensors, etc.
7. Adaptation --- this function allows you to perform adaptive learning /
reset / calibration and other functions for each control module, and also
includes some important module data for parameter adjustment.
Note:
The function list will vary according to different models, and the actual
products shall prevail.
To perform diagnostic functions：
1) Select “Diagnostic” icon.
2) Select Vehicle Manufacturer. And select the version.
3) Select vehicle selection and select vehicle model, model year, etc.
according to the on-screen prompts.
4) Select the diagnosis mode and guide the selection through the menu of
any diagnosis mode to locate the required test system.
5) Select the test to be performed on the function list.
Module Information --- Read full electronic system module information,
such as VIN, part number, version, supplier, production date of ECU, Also

EN
12
you can save these data by press [REC].
Read fault code --- This function reads and displays the fault codes
retrieved from the vehicle control system. Read the fault code of all
electronic system module, display the fault status and description code. In
addition, you can press [REC]to save the fault information. The "read
fault code" interface varies according to the test vehicles, and some
vehicles can also read frozen frame data.
a) After press the [REC]button, the screen will display the recorded
data storage path, and the recorded fault code information can be
read on the computer. as shown in the figure below.
b) Press the [FRZ] button to view the frozen frame information of fault
code, as shown in the figure below.
c) Press the [HELP] button to read the help information. as shown in

EN
13
the figure below.
Clear fault memory –After reading the vehicle fault code and completing
the repair, this function can be used to clear the original fault code. Before
clearing the fault code, make sure the vehicle engine is off and the ignition
key is in the on (run) position. Erase full electronic system module fault
code and diagnostic related freeze frame information.
How to clear the fault code:
1) Select the [Clear fault code] on the "function menu"
2) At this time, a warning message will appear on the screen, indicating
that the fault code and frozen data information will be cleared.
a) Select [OK] to continue. After the operation is successful, an
interface will be displayed on the screen.
b) Select [Cancel] to exit.
3) Re-enter the [Read fault code] function to retrieve the fault code to
ensure the successful code clearing operation.
View data –When this function is selected, a list of data for the selected
module is displayed on the screen. The options available for different
vehicle control modules will vary. These parameters are displayed in the
order sent by the electronic control module, so there will be differences

EN
14
between different vehicles. Read full electronic system module live data
by text value or waveform. Also you can save these data by press [REC].
When there is [W] in the upper right corner of the data stream, select
[WAVE] to display the waveform, as shown in the following figure:
Actuation Test --- The "Actuation Test" function accesses vehicle specific
subsystem tests and performs component tests. The available test
functions vary according to the manufacturer, year and model, and the
menu will only show the available test options.
When performing the actuation test, the tester inputs the command to the
ECU to drive the actuator. This test can monitor the operation of the
actuator by reading the ECU data of the engine. For example, by
repeatedly switching the two working states of the solenoid valve, relay
and switch, it can determine whether the system or components are
working normally, and execute the command of the switch on the door or
window.
Left / Right turn signals
Through the left / right turn signal action test item, you can control
the left and right turn signal flashing to test whether the turn signal
works normally.

EN
15
To perform signal turn signal lamp action test (take left turn signal
lamp as an example):
1) Enter the action test and select left turn signals.
2) At this time, the signal indicator is not running.
3) Press the [Start] button to
execute the action.
4) At this time, the signal
indicator is running,
indicating that the action is
being executed. Press the
[stop] button to stop.
Window regulator front / rear left / right: down / up
Through the window regulator action test item, you can control the
whole vehicle window up and down to test whether the window up
and down works normally.
Windshield wiper motor (V) stage 1 / 2
Through the action test item of windshield wiper motor, the wiper
can be controlled to work at 1 / 2 gear to test whether the wiper
motor works normally
Basic settings --- Basic Setting means reset some basic parameter
settings for each control module, especially some parts / sensors, etc.

EN
16
Focus on the following three functions：
Sliding Roof Basic Setting
After the maintenance of the skylight, it is necessary to use the basic
setting to re match and learn the stop point value of the automatic
skylight at each position.
To Preform Sliding Roof Basic Setting:
1) Sliding roof basic setting is required after the maintenance of
the sunroof，access basic settings，select Sliding Roof Basic
Setting.
2) The basic settings of the sliding roof is closed. Press the help
button to display help information.
3) Press the [Help] button to display a prompt message as above.
4) Then press the [ON] button to rematch and learn the stop point