ICC CAT 5e User manual

ICC’s Category 5e Data Module is an 8-port network interface solution. The module is designed and engineered with
110-type IDC connectors to provide secure terminated wiring and meets or exceeds TIA performance standards. It supports
up to eight data lines local area network applications such as cable or DSL services.
Category 5e Data Module
ICRESDPA2U - Single
Assembly Instructions
Find a at, clean surface and press rmly on the module to adhere to
the desired surface.
Step 1 Step 2
Peel o󰀨 lm backing from each of the self-adhesive.
ICRESDPA2W - 10-Pack
8-Port CAT 5e Data Module, 1 pieceA
Universal Mount, 1 piece
B
8-Port CAT 5e Data Module, 10 pieces
A
Universal Mount, 10 pieces
B
A
B
Email us: [email protected] • Go online: icc.com
© Copyright 2020, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. MSR-0432-5 Rev B
8-Port CAT 5e Data Module with Universal Mount
INSTALLATION INSTRUCTIONS

Wall Outlet
Wall Outlet
CAT 5e Cable
Router (not provided by ICC)
Patch Cord
DSL/Cable
Modem INTERNET
Orange/White
Blue
Blue/White
Orange
Pairs
TIA-568-A
This module supports data connections for 8 locations. Connect one end of a patch cord to a
jack and the other end to the router after identifying the port you want to activate.
It is important to follow TIA-568-A wiring
because it allows pair 1 and 2 to be used for
phone applications, up to 2 lines.
Data Module Setup
Step 3
Punch Down Tool
110 Connector
Blue
Blue
Orange
Orange
Blue/White
Orange/White
Green/White
Brown/White
Brown
Brown
Green
Green
Terminate as indicated. Follow the color-code and only use 110 punch-down tool to terminate the wires. TIA-570 residential wiring standard
species TIA-568-A color code wiring as the standard for residential installations.
Wiring
© Copyright 2020, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved.
Email us: [email protected] • Go online: icc.com
MSR-0432-5 Rev B