Ice I18B User manual

OPERATOR & Parts Manual
Automatic Scrubber
www.icecompanies.com
8019009
REV.03(06-2014)
I18B
I18C
INTERNATIONAL CLEANING EQUIPMENT

HOW TO ORDER PARTS
Only use ICE Company supplied or equivalent parts. Parts and supplies may be ordered
online,by phone, by fax or by mail.
1. Identify the machine model.
2. Identify the machine serial number from the data label.
3. Ensure the proper serial number is used from the parts list.
4. Identify the part number and quantity.
Do not order by page or reference numbers.
5. Provide your name, company name, customer ID number,billing and shipping address,
phone number and purchase order number.

Model No.
Serial No.
Machine Options
Sales Rep.
Sales Rep. phone no.
Customer ID Number
Installation Date
READ OPERATOR MANUAL MANUAL CAREFULLY
International Cleaning Equipment
XiangShi Road, LiaoBu, DongGuan, GuangDong, China
Tel:[phone]
Fax:[phone]
Specifications and parts are subject to change without notice.
PROTECT THE ENVIRONMENT
Please dispose of packaging materials,old machine components
such as batteries, hazardous fluids, including antifreeze and oil,
in an environmentally safe way according to local waste disposal
regulations.
Always remember to recycle.
ICE I18B/I18C 2

& return your warranty card.

9',+:?68+)';:/549
3')./4+)53654+4:9
3')./4+9+:;6/49:'22':/54
3')./4+56+8':/54
=./2+56+8':/4-3')./4+
:'41*8'/4/4-
68+<+4:':/<+3'/4:+4'4)+
('9/):85;(2+9.55:/4-
:+).4/)'296+)/,/)':/54
6'8:92/9:
=+'8:+'86'8:92/9:
=/8/4-*/'-8'3
ICE I18B/I18C 3
:'(2+5,)54:+4:9ڣ

SAFETY PRECAUTIONS
ICE I18B/I18C  4
OPERATOR MANUAL
This machine is intended for commercial use. It

indoor environment and is not constructed for any
other use.Only use recommended accessories.
All operators should read, understand and
exercise the following safety precautions:
1. Do not operate machine:
– Unless trained and authorized.
– Unless you have read and understood the
operator's manual.

– If not in proper operating condition.
– In outdoor areas and standing water.
2. Before operating machine:
– Make sure all safety devices are in place
and operating properly.
3. When using machine:
– Go slow on inclines and slippery surfaces.
– Follow all safety guidelines.

to operating it.
– Never allow children to play on or around
the machine.
– Do not operate on inclines that exceed
2%(3°).
4. Before leaving or servicing machine:
– Stop on level surface.
– Turn off machine.
5. When servicing machine:
– Read operator's manual thoroughly prior to
operating or servicing this machine.
– Use manufacturer supplied or approved
replacement parts.
– Secure machine with wheel blocks prior to
jacking the machine up.
– Use approved jack or hoist to safety elevate
the machine.
– Disconnect batteries prior to working on
machine.
– Wear gloves when handling batteries or
battery cables.
– Avoid any contact with battery acid.

clothing while servicing machine.
Batteries may emit hydrogen gas.

hydrogen gas. Keep sparks and open
flames away! Keep battery compartment
open when charging(except maintenance-
free batteries).
Flammable materials can cause an
explosion or fire. Do not use flammable
materials in tanks.
Flammable materials or reactive
mentals can cause explosion or fire. Do
not pick them up.
FOR I18B

SAFETY PRECAUTIONS
Carefully read and understand this manual before operating this machine.
This machine must be grounded!
This scrubbing machine shall be grounded while in use to protect the operator from electric
shock.Grounding provides a path of least resistance for electric current. This machine is
equipped with a cord having an equipment-grounding conductorand grounding plug. The plug
must be plugged into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances. Do not remove the ground pin under any circumstances.
This machine is for use on a nominal 110-volt circuit and
has a grounding plug that resembles the plug illustrated
in Figure. Make sure that the machine is connected to

adapter should be used with this machine.
This machine is intended for commercial use. It is constructed for use in an indoor environment
and is nor intended for any other use. Use only recommended accessories.
1. Do not operate machine:
– Unless trained and authorized. – Unless you have read and

– With a damaged cord or plug – With the use of extension cords.
– If not in proper operating condition. – In outdoor areas and standing water.
2. Before operating machine:
– Make sure all safety devices are in place and operating properly.
3. When using machine:
– Do not run machine over cord. – Do not pull machine by cord or plug.
– Do not pull cord around – Do not unplug by pulling on the cord.
sharp edges or corners. – Do not stretch cord.
– Do not handle plug with wet hands. – Keep cord away from heated surfaces.
– Report machine damage or fault
operation immediately.
To avoid electrical shock,please replace the power cord immediately if any
damage is being detected. The replacement must be performed only by an
authorized person or by our customer service center.
4. Before leaving or servicing machine:
– Turn off machine. – Unplug cord from outlet.
5. When servicing machine:
– Unplug cord from outlet. – Use manufacturer supplied or
approved replacement parts.
Flammable materials can cause explosion or fire. Do not use flammable
materials in tanks or pick them up.
OPERATOR MANUAL
ICE I18B/I18C  5
FOR I18C

MACHINE COMPONENTS
ICE I18B/I18C 6
OPERATOR MANUAL
Machine Structure
1. Brush cover 2. Brush 3. Cover tank
4. Recovery tank 5. Solution tank 6. 8" wheels
7. Squeegee 8. Control box 9. Trigger
10. Adjusting handle 11. Water filter 12. Ball valve
13. Squeegee lifting handle 14. Power cord hook 15. Brush/pad driving hub
16. Brush plunger 17. Plug of water filling port 18. Knob
19. Clear tube 20. Switch for brush motor 21. Switch for vacuum motor
22*. Battey monitor 23. Circuit breaker 24*. Charger power cord
24**. Power cord 25. Adjustable wheel 26. Adjusting plunger
12
3
4
5
6
7
8
9
10
11
13
12
14
15
17
11
16
18 19
20 20 21 21
22*
23 23
9
24* 24**
I18B I18C
* : only for I18B **:only for I18B
25
25
26

MACHINE SET UP & INSTALLATION
ICE I18B/I18C  7
OPERATOR MANUAL
UNPACK MACHINE:
Be sure and check packing carton for any damage. Immediately report any damage to carrier.
Be careful not to let machine vibrate while carrying, Check contents of package to ensure that
the following items are included: Machine, squeegee assembly, brush/pad driver, charger cord.
1) Sweep the outside of the machine.
2) Check battery meter to make sure batteries are fully charged (see battery charging, only for
I18B ).
3) Check that squeegee and brush / pad is properly installed.
4) The forward speed of machine can be controlled by turning the handle(10). Turn the handle
clockwise to speed up machine. or turn the handle anticlockwise to slow down machine.

exceed the limit that machine allowed(2%).
INSTALLING THE SQUEEGEE:
1) Loosen the two knobs(18) on the squeegee and slide the squeegee into the slots at the rear
of the squeegee bracket. (the wheels on the squeegee point to the machine.)
2) Tighten the knobs securely.
MACHINE SET UP & PRE-OPERATION CHECKS:
INSTALLING PAD DRIVER OR BRUSH:
1) Turn off machine.
2) Tilt the machine backwards, line up the driving hub with the hole of brush or pad driver, make


3) Push the plunger which on the brush cover to prevent the driving hub from rotating,then spin
the brush/pad clockwise with your another hand till the clip clamp the block on the brush/pad.
FILLING THE SOLUTION TANK:

2) Fill solution tank with water. (use a hose which link to a water faucet,water temperature
should not exceed 50° C) The clear tube(19) in the back right of the machine has gallon
markers to help determine the water level in the solution tank(5).
*Depending on the dirty level of the ground, add the proper amount of detergent into the
solution tank.
Do not put any flammable materials into solution tank. This can cause an
explosion or a fire. Only use recommended cleaning chemicals. Contact
your janitorial supply distributor for recommendations on proper chemicals.
NOTE: There are 2positions for the adjustable wheel (pull out the plunger (26) for adjusting).
Position 1: machine can be tiled backwards and the brush / pad driver can be installed.
Position 2: for normal operation and transportation.

OPERATOR MANUAL
ICE I18B/I18C 8
MACHINE OPERATION
Do not operate machine unless you have read and understand this manual.

2) Turn brush motor switch(20) to “on” position.
3) Turn vacuum motor switch(21) to “on” position.
4) Rotate the ball valve(12) handle to vertical position. Solution will not begin to flow until the
operating triggers (9) are pulled.
5) To begin scrubbing, pull on the blue operating trigger(9), when this triggers is pulled, the pad

6) Begin scrubbing by moving the machine forward
Do not keep the machine in the same position with the pad / brush spinning,
or you might damage the floor.

WHILE OPERATING MACHINE
1) Occasionally open the cover tank(3) to see if there is any foam build-up. If excessive foam is
found, add defoamer to the recovery tank.
Foam must not enter the float shut-off screen, or damage can occur to the
vacuum motor. Foam will not activate the machine's float shut-off device.
2) Occasionally view the clear tube at the back left of the machine to check the amount of cleaning
solution that is left in the machine.

blades down with a damp cloth.
Do not use your fingers to wipe or remove debris from the blades, as injury
may occur.
When the solution tank runs empty, turn off the brush switch and ball valve of solution tank. Keep
the squeegee down and continue to vacuum until all the dirty water is picked up.
TANK DRAINING
1) Turn the switches on the control panel to “off ” position.
2) Raise the squeegee, transport machine to approved area for draining tank(s).
Any time scrubbing is completed, or when refilling solution tank, the
recovery tank should be drained and cleaned.
If the recovery tank is not drained when the solution tank has been refilled,
foam or water may enter the float shut-off mechanism and cause damage to
the vacuum motor.

ICE I18B/I18C  9
OPERATOR MANUAL

the drain hose plug to begin the draining process.
2) Clean the recovery tank after every use. Use a fresh water hose to rinse out the recovery

If you are storing the machine for any period of time, keep the cover tank open
so the tank can dry completely and smell fresh.
DRAINING THE RECOVERY (DIRTY) TANK
DRAINING THE SOLUTION (CLEAN) TANK
Any time scrubbing operation is completed, the solution tank should be drained
and cleaned.
1) Pull down on the clear tube (back left of the machine) to remove it from the hose barb. This

2) Rinse the solution tank with clean water after every use. This will help prevent chemical
buildup and clogging of the solution lines.

the tube is pushed all the way up on the hose barb.

screen, clean it up if necessary.

correct position.



BATTERY CHARGING (ONLY FOR I18B)
WARNNING: Fire or explosion hazard. Batteries may emit hydrogen gas. Keep
sparks and open flame away. Keep battery compartment open when charging.
NOTE: 
- Automatic shut off circuit.
- Deep cycle charging.
- Output current of 8-15 Amps.
- Output voltage of 24 volts.
Each machine was equipped with on-board charger and batteries, please use oringinal parts
only.

OPERATOR MANUAL
1) Place the machine in a well ventilated area.
2) Turn the machine off.

4) Connect the charger's AC power supply cord to a properly grounded receptacle.
5) The charger will automatically begin to charge and will automatically shut off once the
batteries are fully charged.
6) Upon completion of charging, disconnect the AC power supply cord.
PREVENTATIVE MAINTENANCE
WARNNING: Before performing any maintenance on the machine, be sure that
the power is turned off, or the batteries are disconnected!
WARNNING: Repairs are to be completed by authorized service centers only.
Any repairs completed by unauthorized persons will avoid the warranty.
DAILY MAINTENANCE
1) Remove pad driver / brush and clean with approved cleaner.
2) Drain recovery and solution tanks completely and rinse out with clean water. Visually check
the recovery tank for debris and clean out as necessary.
3) Raise squeegee assembly off floor and wipe it down with a damp towel. Be sure to store the
squeegee in the up position.


outside of machine to avoid damage to motor and wiring.
6) Unplug vacuum motor from power source and hose cuff & remove the drain hose from the
holder prior to removing the recovery tank when performing maintenance.
7) Check the condition of the squeegee blade wiping edge, rotate blade or replace it if worn.
ICE I18B/I18C  10
NOTE: The charging status can be seen through the lights behind the transparent panel:
Yellow light on: Normal charging

Green light on: Fully charged, batteries ready for use.
Yellow lights ash: No batteries or incorrect wiring.
Red Yellow 2Yellow 1Green 2Green 1
Battery Indicator Description: Green lights on: full power.
Yellow lights on, green lights off : medium power.
Red light on, other lights off: 20% power, the
maichine should be stopped and the batteries
should be recharged.
Red light flash: the batteries have already been
discharged deeply.
NOTE: Frequently deep discharging will reduce
the life of the batteries, charge the
batteries when the red light is on.

MOTOR MAINTENANCE
1) Contact your local ICE Distributor for any motor maintenance.
2) Check the motor brushes every 250 hours, Replace the brushes when they are worn to a
length of 10mm or less.
OPERATOR MANUAL
ICE I18B/I18C  11
MACHINE STORAGE
1) Always store the machine indoors and in its upright position.
2) Always store the machine in a dry area.
3) Always take off the pad driver / brush before storage.



be covered by the warranty.


MONTHLY MAINTENANCE
1) Clean the battery tops to prevent corrosion (only for I18B).
2) Check for loose battery cable connections (only for I18B).
3) Inspect and clean the recovery tank cover seal. Replace it if damaged.
4) Lubricate all grease points and pivot points with silicon spay and approved grease.
5) Check the machine for loose nuts and bolts.
6) Check the machine for leaks.
WARNNING: Batteries may emit hydrogen gas and an explosion or fire can
result. Keep sparks and fire away from batteries at all times.
WARNNING: Whenever servicing batteries, be sure to wear protective gloves.
Avoid contact with battery acid at all times.
BATTERY MAINTENANCE (ONLY FOR I18B)
Note: For the best machine performance, keep batteries charged at all times.Do not let them sit in a
discharged condition.
1) Always follow the battery charging direction as outlined in the BATTERY CHARGING section of
this manual.
2) Keep battery tops and terminals free from corrosion. A strong solutin of baking soda and water is
the best way to keep the batteries corrosion free. DO NOT ALLOW THE BAKING SODA / WATER
SOLUTION TO ENTER THE BATTERY CELLS.
3) Use a wire brush with the baking soda solution to properly clean the battery posts and
connections.
4) Check battery connections for wear and loose terminals. Replace them if necessary.

ICE I18B/I18C 12
OPERATOR MANUAL
BASIC TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
No Power
The wiring not connected
correctly or bad wiring Check the wiring or contact ICE Distributor
Bad brush motor Contact ICE Distributor
Carbon brushes worn out Contact ICE Distributor
Vacuum
motor does
not run
The wiring not connected
correctly or bad wiring Check the wiring or contact ICE Distributor
Bad vacuum motor Contact ICE Distributor
Carbon brushes worn out Contact ICE Distributor
Little or no

Bad ball valve Contact ICE Distributor
Bad solution valve Contact ICE Distributor
Ball valve position in need of
adjustment
When ball valve is in horizontal position,the

Poor water
pick up
Squeegee clogged Clean debris off squeegee with a damp towel
Squeegee blades worn Install new squeegee blades
Squeegee not mounted
correctly


Vacuum hoses have a hole or
are loose
Check hose connections and make sure they

Vacuum hose may be clogged Check hose for debris and remove any clog.
Drain hose stopper is loose Tighten drain plug.
Vacuum motor is loose Tighten vac motor mounting screws. Do not
over tighten or damage will occur.
cover tank is loose 
Recovery tank is full Drain recovery tank
Float shut off is clogged 
and remove any debris
short
runtime*
Low battery charge Fully recharge batteries
Defective batteries Replace batteries
Batteries need maintenance See BATTERY MAINTENANCE
Faulty battery charger Repair or replace battery charger
* ONLY FOR I18B

ICE I18B/I18C 13
OPERATOR MANUAL
TECHNICAL SPECIFICATION
ITEM UNITS DATA
Working Width mm 450
Squeegee Width mm 780
Efciency m²/h 1100
Brush Dia. mm 450
Brush Speed rpm 180
Max Pad Pressure Kg 30
Brush Motor V / W I18B: 24 / 550
I18C: 110 / 550
Vacuum Motor V / W I18B: 24 / 500
I18C: 110 / 500
(GZZKXOKY<'.&NX 2-12 / 85
Solution Tank Capacity L 35
Recovery Tank Capacity L 40
Machine Weight (without batteries) Kg 62.5
(GZZKXOKY=KOMNZKg 2h25
Machine Length mm 1165
Machine Height mm 1025
Machine Width mm 520
)GHRK2KTMZN m25
Charger cord * m2
Max Gradient % 2
Type of Drive - Brush assisted
Noise Level dB 70
Working Vacuum mbar 155
* ONLY FOR I18B
** ONLY FOR I18C

6'8:92/9:
ICE I18B/I18C 14
8+)5<+8?:'41'99+3(2?

6'8:92/9:
ICE I18B/I18C  15
* ONLY FOR I18B
8+)5<+8?:'41'99+3(2?
DIA PART DESCRIPTION NO
NO NUMBER REQ'D
1 8011001 RECOVERY TANK 1
2 1221410 PH SCREW M4×10,SS 3
3 8011011 DECAL,LEFT 1
4 4010316 ICE LOGO 3
5 8011030 DRAIN HOSE 1
6 8012007 CONNECTING PLATE 1
7 8012008 BUSHING 1
8 1421618 PLAIN WASHER 6×18×1.6 3
9 1221616 PH SCREW M6×16, SS 1
10 1962050 HOSE CLAMP 27-51mm 2
11 8112002* VACUUM MOTOR 24V, 500W 1
8011023 VACUUM MOTOR 110V, 500W 1
12 8011003 VACUUM HOSE 1
13 1113608 SELFLOCKING NUT M6 3
14 1411612 PLAIN WASHER 6×12×1.6 3
15 8011007 MUFFLER 1
16 8112005 GASKET 1
17 8112006 BOLT 3
18 1111605 HEX NUT M6 3
19 8011012 DECAL,RIGHT 1
20 8011009 PLATE 2
21 1421409 PLAIN WASHER 4×9×0.8,SS 5
22 8111015 FLOAT CAGE 1
23 8111014 FLITER COUPLING 1
24 1021616 HEX HEAD BOLT M6×16 2
25 8111001 GASKET 1
26 8113007 RUBBER STRIP 1
27 1321110 AUTO TAPPING SCREW ST3.5×10 1
28 8131003 CAP 1
29 1123406 SELFLOCKING NUT M4, SS 1
30 8112008* CARBON BRUSH 2
8011022 CARBON BRUSH 2

6'8:92/9:
ICE I18B/I18C 16
)5<+8:'41'99+3(2?
* ONLY FOR I18B
)5<+8:'41'99+3(2?
DIA PART DESCRIPTION NO
NO NUMBER REQ'D
1 8012001 COVER TANK 1
28111022* WARNING LABLE 1
8012003 WARNING LABLE 1
3 8011005 CAP 1
4 8012002 GASKET 1

6'8:92/9:
ICE I18B/I18C 17
952;:/54:'41'99+3(2?

6'8:92/9:
ICE I18B/I18C 18
* ONLY FOR I18B
952;:/54:'41'99+3(2?
DIA PART DESCRIPTION NO
NO NUMBER REQ'D
1 8013001 SOLUTION TANK 1
2 8013010* 12V BATTERY 2
3 1321110 AUTO TAPPING SCREW ST3.5×10 1
4 8210531 KNOB, M6 1
5 1221640 PH SCREW M6×40, SS 1
6 1421409 PLAIN WASHER 4×9×0.8 1
7 8133002 PLUG 1
8 8013003 TRANSPARENT HOSE 1
9 8013017 DECAL 1
10 8013019 BOLT WITH SHOULDER 4
11 8013011 SLIDER HOUSING 1
12 8013021 PLUNGER 1
13 1123608 SELF-LOCKING NUT M6 SS 4
14 1421618 PLAIN WASHER 6×18×1.6 6
15 1647320 PING 3×20 1
16 8013013 SLIDER 1
17 1411030 PLAIN WASHER 10×30×2.5 1
18 8013016  1
19 1421020 PLAIN WASHER 10×20×2 1
20 1422026 SPRING WASHER 10 SS 1
21 1031032 HEX HEAD SCREW M10×32 1
22 8016010 WHEEL SHAFT 1
23 1411816 PLAIN WASHER 8×16×1.6 2
24 1432821 SPRING WASHER 8 2
25 1021820 HEX HEAD SCREW M8×20,SS 4
26 8115200  2
27 1421828 PLAIN WASHER 8×28×3 2
28 8115203 WHEEL CAP 2
29 1962025 HOSE CLAMP 1
30 8013004 DECAL,BALL VALVE 1
31 8013009 DECAL,RIGHT 1
32 1021616 HEX HEAD SCREW M6×16,SS 2
33 1422616 SPRING WASHER 6 SS 2
34 8013002 BACKET 1
35 1221510 PH SCREW M5×10,SS 4
36 1421510 PLAIN WASHER 5×10×1,SS 4
37 8113009 WIRE CLAMP 4
38 8114751* WIRING BOOT 4
39 8013008 DECAL,LEFT 1

6'8:92/9:
ICE I18B/I18C 19
)54:852(5>'99+3(2?,58/(
)54:852(5>'99+3(2?
DIA PART DESCRIPTION NO
NO NUMBER REQ'D
1 8014062 REAR PANEL 1
2 1421512 PLAIN WASHRE 5×12×1.5 9
3 1211516 PH SCREW M5×16 5
4 1421409 PLAIN WASHER 4×9×0.8 13
5 8114707 RELAY 1
6 1113305 SELFLOCKING NUT M3 8
7 8014061 SWITCH BRACKET 1
8 1411309 PLAIN WASHER 3×9×0.8 8

6'8:92/9:
ICE I18B/I18C 20
DIA PART DESCRIPTION NO
NO NUMBER REQ'D
9 8014034 BRCKET 1
10 1411824 PLAIN WASHER 8×24×2 6
11 1021820 HEX HEAD BOLT M8×20 6
12 8114030 FIXING BRACKET,CONTROL BOX 1
13 8014066 BATTERY CHARGER 24V 1
14 8113104 HANDLE 1
15 6210111 HOSE CLAMP 1
16 1221416 PH SCREW M4×16 SS 2
17 8014010 SQUEEGEE LIFTING HANDLE 1
18 8014008 CONTROL BOX 1
19 8014013 SQUEEGEE LIFTING ROPE 1
20 8114511 JOINT BEARING SQ6 1
21 1421618 PLAIN WASHER 6×18×1.6,SS 4
22 1121605 HEX NUT M6 2
23 1421828 PLAIN WASHER 8×28×3 2
24 1021830 HEX HEAD BOLT M8×30 2
25 1221512 PH SCREW M5×12,SS 1
26 8114005 PIPE COUPLING 1
27
8014030 CHARGER CORD (FOR US) 1
8014040 CHARGER CORD (FOR EU) 1
8014050 CHARGER CORD (FOR JP) 1
8014070 CHARGER CORD (FOR UK) 1
28 8014038 GASKET 1
29 8014036 PANEL 1
30 8014044 PLATE 1
31 1221516 PH SCREW M5×16 SS 2
32 1123608 SELFLOCKING NUT M6,SS 1
33 8114703 OVERLOAD PROTECTOR 35A 1
34 1421518 PLAIN WASHER 5×18×2 1
35 1021512 HEX HEAD BOLT M5×12,SS 1
36 8014012 BAFFLE 1
37 8014101 LIFTING ROPE SPACER 1
38 1021630 HEX HEAD BOLT M5×12,SS 1
39 8014045 TRANSPARENT PLATE 1
40 8014006 WATERPROOF SWITCH 250V 16A 2
41 8014043 WIRE BUFFER 1
42 8014041 WIRE CLAMP 1
43 1221616 PH SCREW M6×16,SS 1
44 2320403 STRAIN RELIEF 1
45 8014063 BATTERY CAPACITY INDICATOR 1
46 1221410 PH SCREW M4×10,SS 15
47 8014067 PANEL DECAL 1
48 8014069 FRONT PANEL 1
49 8114101 SHAFT 1
50 8014004 GASKET 1
51 1221412 PH SCREW M4×12, SS 4
52 1432411 SPRING WASHER 4 2
53 1411409 PLAIN WASHER 4×9×0.8 2
54 8014022 CONTROL TRIGGER 1
55 8014033 PLATE 1
56 1534608 SET SCREW M6×8 4
57 8014031 HEX BUSHING 1
58 8014032 SPRING ROD 1
59 8014035 SPRING 1
60 1211320 PH SCREW M3×20 2
61 1434300 WASHER WITH TOOTH 3 2
62 8114712 MICROSWITCH 1
63 1113507 SELFLOCKING NUT M5 7
64 8014076 RELAY 24VDC 30A 1
65 1123406 SELFLOCKING NUT M4, SS 2